A semipermeable membrane equilibrator for halomethanes in seawater

An equilibrator for sampling the partial pressures of halomethanes in seawater was designed and built, incorporating semipermeable membrane tubing to carry the gas phase. The equilibrator was tested for its ability to equilibrate chloromethane, bromomethane, iodomethane, and CFC-11. The residence time required for these halomethanes to equilibrate in the tubing (30 to 60 s) was determined experimentally. In a laboratory test, concentrations calculated from equilibrator measurements and based on published solubility values were found to differ by 6% to 16% from concentrations measured with a purge-and-trap apparatus, but uncertainties in the solubility values are likely to contribute significantly to the differences. In a comparison at sea, no significant difference was found between the semipermeable membrane equilibrator and another, more conventional equilibrator, except a 1.3% difference for CFC-11. This study demonstrates the feasibility of using semipermeable membranes in this and related applications.     

水和废水中甲乙酮监测分析方法研究

研究了水和废水中甲乙酮经气提 (吹扫 )在常温下用 2 ,4 -硝基苯肼 (DNPH)酸性饱和溶液吸收 ,经衍生形成甲乙酮腙 ,用CS2 萃取后再用气相色谱 (GC -FID)以OV - 175 % /ShimaliteW为固定相和载体 ,分离测定的方法 ,对水和废水中的甲乙酮的测定获得满意的结果     

Microwave-assisted stripping of oil contaminated drill cuttings

The application of microwave heating technology to conventional gas stripping processes has been investigated in the remediation of contaminated drill cuttings. The technical feasibility and limitations of nitrogen and steam stripping processes are demonstrated, and it is shown that the combination of microwave heating with the stripping process offers a step change in performance. Order of magnitude improvements in processing time are shown for the microwave-assisted processes, as well as greatly improved levels of remediation. The mechanisms of contaminant removal are discussed, along with the phenomena which occur with microwave heating processes. The energy requirements of each of pure gas and microwave-assisted processes are also discussed, and the potential applications of each technology are highlighted relative to the overall remediation requirements.     

膜-生物反应器中活性污泥沉降性能与膜污染相关性研究

结合连续流小试，对膜．生物反应器运行过程中，活性污泥沉降性能的变化及其对膜污染的影响进行了研究．结果表明，随着运行时间的增长，该系统内丝状菌大量繁殖，活性污泥沉降性能变差，SVI值升高．随之，膜过滤压差(过滤阻力)平均上升速率有所增加，膜过滤周期缩短．膜过滤压差的“两阶段性(平缓上升期和加速上升期)”变化规律趋于明显，平缓上升期和加速上升期的膜过滤压差上升速率随污泥SVI值的升高分别呈现下降和上升的趋势．污泥沉降性能的变化对膜污染过程产生明显影响．电镜观察表明，污泥沉降性能对膜过滤压差的影响与膜面污染层的结构和厚度有关．     

混合添加剂对PVDF平板疏水膜结构及性能的影响

以不同添加剂采用浸没沉淀相转换法制备基于无纺布支撑的聚偏氟乙烯(PVDF)平板疏水膜,考察了不同添加剂的加入对膜性能与结构的影响;并利用扫描电子显微镜(SEM)、原子力学显微镜(AFM)、红外光谱(FTIR)、接触角测量及膜蒸馏实验等对疏水膜的结构及性能进行表征。结果表明,引入混合型添加剂制备的膜具有较高通量和盐截留率,其疏水性最强,而添加剂对聚合物的晶型影响较小。以35 g/L的NaCl盐溶液为进料液对制备的平板膜进行直接接触式膜蒸馏实验,在热侧进水温度为50℃、冷侧温度为20℃的条件下,所制备的疏水膜通量最高可达12.45 kg/(m2.h),截留率为99.99%。     

Experimental and computational fluid dynamic (CFD) simulation of leak shapes and sizes for gas pipeline

In this paper, a parametric study has been carried out to predict the exit velocity of air through the leakage in the pipe with the help of CFD software ANSYS Fluent. The effect of air pressure in the pipe and the shape of leakage have been studied. Further experiments were also carried out to determine the exit velocity for the defined shape of leakage by varying the air pressure in the pipe. Experimentally, the velocity at a distance of 8 cm from the location of a leak in the horizontal plane was obtained with the help of differential pressure transducers. Using the experimental results, the computational results were validated. The results of the parametric simulation study showed that even for a pressure of 2 bars the velocity profile at the leak location indicates the supersonic state where the Mach number is greater than 1. The study is useful because it may be used as a foundation for risk assessment and safety management in the case of flammable gas leaks through gas pipes.     

Fire and risk analysis during loading and unloading operation in liquefied petroleum gas (LPG) bottling plant

The article focuses on analyzing risks associated with the gas transfer operation in a liquified petroleum gas (LPG) bottling plant in India. The transfer operations involve transferring liquified gas from the transport tanker to the underground storage tank. Due to the rapid expansion of the cities, many LPG bottling plants in India got surrounded by residential areas and business centers. Moreover, to maintain the supply chain, the frequency of the transfer operations at the bottling plant also increased. In this scenario, an accidental release of LPG during the transfer operation may lead to various consequences such as a pool fire, a fireball, and even a catastrophic rupture of the tank with a successive explosion of its contents. In the study, the operations involved in bottling plants are classified into different hazard zones and analyzed. The probability of occurrence of events leading to an accident is modeled using modeling tools such as ALOHA and PHAST. The consequences of an accident following various events, such as jet fire, fireball, etc., are modeled, and the simulation results are compared. The thermal radiation has been estimated as 4–40 kW/m², which could adversely affect the nearby population and could result in damaging plant machinery and equipment.     

Numerical investigation and analysis of indoor gas explosion: A case study of “6·13” major gas explosion accident in Hubei Province,China

Taking the ' 6·13 ′ major gas explosion accident in Shiyan, Hubei Province, China as an example, three problems were studied in this work: (1)The determination of the volume of natural gas involved in the explosion; (2)The propagation process of shock wave inside the building and the damage evolution process of the accident-related building; (3)The overpressure and fragment injury to the person outside the building. Through the numerical simulation in ANSYS/LS-DYNA software, the volume of natural gas involved in the explosion is determined to be 10240 × 1400 × 400 cm (length × width × height) from three perspectives: the damage to the building, the distribution of overpressure inside the building, and the TNT equivalent of the explosion energy. The simulation results are in good line with the accident, which verifies the effectiveness of the scheme and the accuracy of the numerical model. Based on the reasonable filling scheme, the propagation process of shock waves inside the building, the damage evolution process of the building, and the injury ranges of overpressure and fragments outside the building are analyzed. It can be found that the propagation of shock waves in confined space is complex and variable. The explosion shock waves are first reflected and superimposed in the watercourse, resulting in pressure rise. At about 8ms, the shock waves rushed into the first-floor space of the building, and the maximum overpressure was about 0.56 MPa. At about 50 ms, the shock waves rushed into the second-floor space, and the maximum overpressure was about 0.139 MPa. The first and second-floor slabs and infilled walls were almost completely destroyed. The interior walls of the infilled walls are mainly collapsed, and the exterior walls are ejection around the building as the center. The peak displacement and peak velocity of the interior walls of each floor are about 15% of the exterior walls. The fragments which cause fragment injury mainly come from the retaining wall above the watercourse, the maximum velocity is about 89 m/s, and the maximum displacement is 8.9 m. The safety distance of fragment injury is about 8.8 m, while the safety distance of overpressure injury is about 4.6 m. The lethal distance of fragment injury is greater than that of overpressure injury. Compared with the distance between different damage levels of overpressure injury, the difference in fragment injury is small. Therefore, the safety assessment at the engineering level only needs to consider the safety distance of fragment injury. This study can provide suggestions for evaluating the damage of natural gas cloud explosions in confined spaces and is helpful for accident investigation and safety protection.     

膜法脱盐技术在钢铁企业污水回用中的应用分析

钢铁企业综合污水处理厂的出水脱盐处理回用具有重要意义,本文对国内一些钢铁企业采用的膜法脱盐技术的优缺点进行了分析,并提出了改进方案。     

水处理技术发展对电力工业水循环利用的经济性影响

讨论了一些为提高生产力和降低成本而发展起来的废水零排放或水回收循环利用前沿技术,并将这些技术的经济性与原有的水循环利用系统进行比较.