一种活性污泥-沉淀池动态模型及其仿真应用

耦合两步硝化-反硝化活性污泥法数学模型和对流-扩散标准形式二沉池分布式参数模型,建立了一个新的活性污泥-沉淀池动态模型。基于MATLAB/Simulink仿真平台,组态完成了某常规完全混合式AO工艺系统的仿真模型。经过模拟进行调控优化预演,所建模型能完整体现系统的状态变量随各操作变量变化而呈现出的时变性、非线性、耦合性、大滞后性等特征;所建模型可以作为工艺智能分析、挖掘、优化、预测的基本仿真备选工具。     

Advanced treatment of municipal wastewater by nanofiltration: Operational optimization and membrane fouling analysis

Municipal sewage from an oxidation ditch was treated for reuse by nanofiltration (NF) in this study. The NF performance was optimized, and its fouling characteristics after different operational durations (i.e., 48 and 169 hr) were analyzed to investigate the applicability of nanofiltration for water reuse. The optimum performance was achieved when transmembrane pressure = 12 bar, pH = 4 and flow rate = 8 L/min using a GE membrane. The permeate water quality could satisfy the requirements of water reclamation for different uses and local standards for water reuse in Beijing. Flux decline in the fouling experiments could be divided into a rapid flux decline and a quasi-steady state. The boundary flux theory was used to predict the evolution of permeate flux. The expected operational duration based on the 169-hr experiment was 392.6 hr which is 175% longer than that of the 48-hr one. High molecular weight (MW) protein-like substances were suggested to be the dominant foulants after an extended period based on the MW distribution and the fluorescence characteristics. The analyses of infrared spectra and extracellular polymeric substances revealed that the roles of both humic- and polysaccharide-like substances were diminished, while that of protein-like substances were strengthened in the contribution of membrane fouling with time prolonged. Inorganic salts were found to have marginally influence on membrane fouling. Additionally, alkali washing was more efficient at removing organic foulants in the long term, and a combination of water flushing and alkali washing was appropriate for NF fouling control in municipal sewage treatment.     

强化除磷曝气生物滤池反冲洗优化及其污泥特性

为探讨BAF(曝气生物滤池)最佳反冲洗强度及其选择依据,以某处理石化二级出水的强化除磷BAF为研究对象,采取不同的反冲洗强度进行气-水联合反冲洗,探讨反冲洗过程中出水污泥量峰值出现时间、污泥的SOUR(比好氧呼吸速率)变化、反冲洗前后微生物量和微生物脱氢酶活性(DHA)的变化以及反冲洗后的恢复效果,并对反冲洗强度参数的选择进行了优化. 结果表明:在该研究条件下,采用气洗〔强度为12 L/(m2·s)〕4 min,气-水联合洗〔气洗强度为12 L/(m2·s),水洗强度为6 L/(m2·s)〕5 min,最后用清水漂洗9 min的反冲洗方式,排水中污泥的ρ(SS)可在最短时间(3 min)达到峰值;反冲洗排水中污泥的SOUR较低,平均值为0.5 mg/(mg·h);距离底端进水口1.3和2.2 m处的滤料层微生物的量损失较小,分别为4.4%和5.3%,其相应微生物的活性有所增加. 研究显示,该条件下反冲洗可有效清除滤料颗粒间所截留及滤料表面脱落的老化生物膜,并可保留适量活性较高的生物膜,强化了传质条件,反冲洗后对污染物的处理能力能恢复迅速.      

除尘器灰斗电加热器供配电节能降耗方案优化

对目前广泛使用的除尘器灰斗电加热器的供配电系统进行了分析,提出了电控设备投资更省、供配电系统运行更节能经济的优化方案,并通过工程实例进行了分析验证。     

江苏省危险废物动态管理信息系统应用及优化设计研究

为进一步加大危险废物监管力度,江苏省实施了危险废物市内转移网上报告试点工作,开发了危险废物动态管理信息系统软件,利用信息技术加强环境监管,简化审批环节,实现线上线下一体化管理.通过分析危险废物动态管理信息系统的主要结构和应用,阐述申报登记、经营台账、查询统计、信息预警、网上转移、日常监督等模块内容,针对系统在危险废物转移实时监控方面的不足之处,提出了开发电子联单的二维码标签和系统的手机操作软件,并共享交通部门GPS监控数据的优化建议.优化后的系统有助于降低危险废物转移过程中的环境风险,真正实现危险废物的全过程安全监控与管理.     

Physical Determinants of Methane Oxidation Capacity in a Temperate Soil

Methane oxidation capacity of soil from an experimentalsite in Northwest England was strongly dependent on temperatureand percentage water holding capacity. The soil had a distincttemperature optimum of 25 °C, with capacity for net methaneoxidation being completely lost below 5 and greater than37 °C. Optimum percentage water holding capacity for methaneoxidation was in the range 30–60%, with significant reductions inmethane oxidation rates in soils outside this range. Organic andmineral layers within the soil showed differences in potentialmethane oxidation rate, with methane oxidation being most rapid inthe buried organic layer and least rapid in the surface organiclayer. The importance of soil structure and gas diffusionlimitation is underlined, as is the strong temperature dependenceof methane oxidation when such diffusion limitation is removed.     

Use of Inverse Spatial Conservation Prioritization to Avoid Biological Diversity Loss Outside Protected Areas

Globally expanding human land use sets constantly increasing pressure for maintenance of biological diversity and functioning ecosystems. To fight the decline of biological diversity, conservation science has broken ground with methods such as the operational model of systematic conservation planning (SCP), which focuses on design and on‐the‐ground implementation of conservation areas. The most commonly used method in SCP is reserve selection that focuses on the spatial design of reserve networks and their expansion. We expanded these methods by introducing another form of spatial allocation of conservation effort relevant for land‐use zoning at the landscape scale that avoids negative ecological effects of human land use outside protected areas. We call our method inverse spatial conservation prioritization. It can be used to identify areas suitable for economic development while simultaneously limiting total ecological and environmental effects of that development at the landscape level by identifying areas with highest economic but lowest ecological value. Our method is not based on a priori targets, and as such it is applicable to cases where the effects of land use on, for example, individual species or ecosystem types are relatively small and would not lead to violation of regional or national conservation targets. We applied our method to land‐use allocation to peat mining. Our method identified a combination of profitable production areas that provides the needed area for peat production while retaining most of the landscape‐level ecological value of the ecosystem. The results of this inverse spatial conservation prioritization are being used in land‐use zoning in the province of Central Finland.     

基于矿井通风三维仿真系统的多级机站通风系统优化与应用

为分析总结多级机站通风方式实际应用中存在的影响通风效果的共性问题,以某大型机械化铁矿通风系统为研究对象,应用能适用多台风机串并联运行的"矿井通风三维仿真系统(简称3DVS)"软件进行应用研究。结果表明,3DVS软件可以快速地实现多级机站通风系统中不同型号多台风机联合作业下的风机选型。采用安装在运输巷道两侧的硐室型风机机站技术能有效解决大压差、大断面运输巷道不安装风门、不掘绕道设置风机机站的关键问题,实现风流有效分配,且具有较好的灵活性,其成功应用,不但为多级机站通风方式的应用提供了技术和经验支持,而且增强了多级机站通风方式的适应性和稳定性,可以减少风机机站维护工作量,不影响行人和运输,促进多级机站技术发展与推广。     

城市夜功能空间优化——以开封市为例

城市夜功能是城市功能的重要组成部分,城市夜功能不同于城市昼功能。在分析了城市夜功能与昼功能差别的基础上,论述了城市夜功能空间优化的范畴和原则,详细阐述了城市夜功能空间＂点＂空间、＂轴＂空间、＂网络＂空间的优化模型和技术路线。最后以开封市为例,根据开封市的实际情况,具体详细地论述了开封市城市夜功能空间点—轴—网络空间的优化过程,为开封市城市夜功能空间优化提供了理论依据。     

Exergoeconomic Environmental Optimization of Piston-Prop Aircraft Engines

In this study, exergy, exergoeconomic, exergoenvironmental analyses, and exergoeconomic environmental optimization are applied to a four-cylinder, spark ignition, naturally aspirated and air-cooled piston-prop aircraft engine in the cruise phase of flight for the first time to the best of the authors` knowledge. Here, three piston-prop aircraft engine parameters (altitude, air–fuel ratio (AF), and rated power setting (PS)) are selected for optimization purposes. All exergy, exergoeconomic, and exergoenvironmental values are calculated first. These values are then optimized to find the best results of all analyses. The best altitude, AF ratio, and PS values are finally found while the maximum exergy efficiency, the minimum product specific environmental impact, and the minimum average unit fuel exergy cost are obtained. The best results of optimization indicated that the maximum exergy efficiency varied between 19.54% and 19.80%, the minimum unit fuel exergy cost ranged from 126.30 $/GJ to 127.23 $/GJ, and the minimum specific environmental impact of production was in the range of 8.70–9.59 mPts/MJ. Based on the results obtained, for ensuring the optimum conditions, the low AF ratios and the low-altitude flight at high rated power settings have to be selected.