江苏省工业废水排放及其与环境污染治理投资的耦合关系研究

研究了1990年-2007年江苏省工业废水排放与经济增长的动态关系,结果表明1990年-2007年江苏省工业废水排放量呈现在波动中略有上升的趋势,年均增长率显著低于GDP的增长速度,工业废水并未与经济同步增加;采用库兹涅茨曲线对废水排放量与人均GDP之间的关系进行拟合发现,目前江苏省人均GDP已经超过转折点水平,因此今后一段时期随着经济的发展,废水排放量呈现下降趋势,说明江苏省环境治理取得了一定的效果;同时,研究表明江苏省各县（市、市辖区）工业废水排放大多呈现下降趋势,排放量最高区集中于苏南一带,而环境治理投资全省呈现上升趋势,全省环境治理投资额增长速度较快,以苏北地区最为明显;研究还发现废水排放量与投资额的空间耦合关系日益密切,体现了江苏省对环境治理的力度在逐步加大。     

Microbiological parameters and maturity degree during composting of Posidonia oceanica residues mixed with vegetable wastes in semi-arid pedo-climatic condition

The aim of this study was to characterize the biological stability and maturity degree of compost during a controlled pile-composting trial of mixed vegetable residues (VR) collected from markets of Tunis City with residues of Posidonia oceanica (PoR), collected from Tunis beaches. The accumulation in beaches (as well as their removal) constitutes a serious environmental problem in all Mediterranean countries particularly in Tunisia. Aerobic-thermophilic composting is the most reasonable way to profit highly-valuable content of organic matter in these wastes for agricultural purposes. The physical, chemical, and biological parameters were monitored during composting over 150 d. The most appropriate parameters were selected to establish the maturity degree. The main result of this research was the deduction of the following maturity criterion: (a) C/N ratio < 15; (b) NH₄⁺-N < 400 mg/kg; (c) CO₂-C < 2000 mg CO₂-C/kg; (d) dehydrogenase activity < 1 mg TPF/g dry matter; (e) germination index (GI) > 80%. These five parameters, considered jointly are indicative of a high maturity degree and thus of a high-quality organic amendment which employed in a rational way, may improve soil fertility and soil quality. The mature compost was relatively rich in N (13.0 g/kg), P (4.74 g/kg) and MgO (15.80 g/kg). Thus composting definitively constitutes the most optimal option to exploit these wastes.     

Experimental investigation of open core downdraft biomass gasifier for food processing industry

This paper deals with field related experience of a low temperature industrial heat application through biomass gasification. The gasification system is essentially consists of an open top down draft reactor lined with ceramic. The experiment reveals that 6.5 kg of liquefy petroleum gas (LPG) is fully replaced by 38 kg of sized wood on hourly basis. The maximum temperature attained was 367°C in 130 min at 100.7 Nm³ h⁻¹ gas flow rate. This system has resulted a saving of about 19.5 tons of LPG over 3,000 h of operation, implying a saving of about 33 tons of CO₂ emission, thus a promising candidate for clean development mechanism. Fuel economic analysis of gasifier system showed that the saving was about 13,850 US$ for 3,000 h of baking operation.     

全程高温好氧堆肥快速降解城市生活垃圾

为了提高堆肥处理城市生活垃圾（MSW）的速率和质量,设计了一种外加热源的全程高温好氧堆肥工艺.实验以全程高温好氧堆肥和传统好氧堆肥两种方法对MSW进行了60d的堆肥处理.同时,监测了堆肥的pH和温度等参数的变化情况,并以C/N、种子发芽率(GI)、可溶性有机碳(DOC)、比好氧速率(SOUR)和脱氢酶（DH-ase）活性为指标评价了堆肥的腐熟度和质量.结果表明,全程高温堆肥法和传统堆肥法的堆肥周期分别为16d和28d,两种方法得到的产品其pH值均在7左右.在第31d将全程高温堆肥产品置于30℃恒温箱时,其理化性质没有出现明显波动,说明其堆肥产品性质稳定.因此,全程高温好氧堆肥法能明显缩短堆肥周期、提高堆肥质量,具有很大的应用潜力.     

Determination of emergency assembly point for industrial accidents with AHP analysis

Major industrial accidents, which are a type of technological disaster, are very important due to the security risks and financial damages that threaten the environment and human health in today's industrialization. In this study, it was aimed to propose an approach that will guide the decision makers to choose the emergency assembly point that should be in the distance or shelter where the employees will be not affected by the negative consequences of emergencies within the scope of the obligation of industrial establishments preparing an internal emergency plan for major industrial accidents. For this purpose, in the first stage, modelling studies were carried out with ALOHA (Areal Locations of Hazardous Atmospheres) Software over possible accident scenarios in an industrial establishment containing different types and amounts of hazardous chemicals. As a result of modelling studies, possible toxic emissions, fire and explosion effect distances and threat zones for the industrial establishment were obtained. In the second stage, the weights of the main and sub-selection criteria to be used in determining the assembly point were calculated. This stage was carried out based on the comparison data obtained as a result of the questionnaire applied to professionals with the help of AHP (Analytic Hierarchy Process) method, which is one of the multi-criteria decision making methods. In the last stage, three candidate points were selected considering the physical effect areas determined in the first stage in the boundaries of the establishment, where the employees were evaluated to be affected the minimum from the negative consequences of industrial accidents. These candidate points were evaluated again with the AHP method on the basis of the sub-criteria whose relative weights were determined in the second stage and a selection was made. As a result, an approach that provides the solution of our problem was obtained.     

Minimum ignition energy of LDPE dust/ethylene hybrid mixture

An experimental device for evaluating the minimum ignition energy (MIE) of LDPE dust/ethylene hybrid mixture was built with the innovative mixing mode. The MIE of the hybrid mixture that contained ethylene below its lower explosive limit (LEL) was studied. The result indicated that adding a small amount of ethylene significantly reduced the MIE of the original dust cloud. All the MIEs with five different particle sizes were found to show similar trends of exponential attenuation with the increase of ethylene concentration; such attenuating effect grew as the dust particle size rose. When ethylene concentration increased and approached to its LEL, the reaction mechanism dominated by combustible dust turned into one dominated by combustible gas. The MIE decreased first and then increased with the dust mass and increased with the dust particle size. A multifactor mathematical correlation model of the MIE with the dust particle size and ethylene concentration was developed.     

翻堆频率对厨余垃圾堆肥过程中H_2S和NH_3排放的影响

为研究厨余垃圾堆肥过程中翻堆频率对H2S和NH3排放的影响,以大类粗分后的厨余垃圾为研究对象,玉米秸秆为调理剂,设置4组翻堆频率不同的处理(每周2次,2周1次,2周1次和不翻堆)进行对比研究。结果表明:翻堆频率的变化对H2S的排放影响不大,对NH3的排放有显著的影响,翻堆频率过高会增加NH3的累积排放量,翻堆频率过低虽然能降低NH3的累积排放量,但会影响到堆肥产物的腐熟。综合厨余垃圾堆肥的无害化指标、H2S和NH3的排放以及最终堆肥产品的毒性检验,在实验条件下,翻堆频率设为每周1次在堆料腐熟的基础上对H2S和NH3减排效果最好。     

手烧型燃煤锅炉和工业炉窑烟尘污染的防治对策

众多手烧型锅炉和工业炉窑废气排放是造成城市空气严重污染的主要原因。本文通过剖析燃煤产生烟尘的机理,现有烟尘控制技术以及不同炉窑的工艺情况,提出手烧型燃煤锅炉、工业炉窑烟尘污染防治措施。     

论清洁生产向工业生态学的转变

清洁生产为建立清洁的生产工艺和产品提供了理论基础和实践经验。但由于主要致力于具体的工业过程控制,不考虑工业系统间的相互连接,对于减缓整体的环境影响的作用不十分显著。以工业代谢、生命周期评价和生态工业园建设为研究方法,于９０年代兴起的工业生态学（生态循环）既清洁生产的扩展,也是产业界实现可持续发展的理论基础,也是新一轮产业革命的发展的具体行动计划。     

示波极谱滴定法测定工业废水中的氰化物

在ｐＨ为１０３的氯化铵氨水底液中,使氰化物与Ｎｉ２＋离子形成稳定物〔Ｎｉ（ＣＮ）４〕２－络离子,过量的Ｎｉ２＋离子用标准ＥＤＴＡ溶液返滴,以Ｎｉ２＋离子在交流示波极谱图上的切口消失指示滴定终点,废水的色度、浊度等对测定不产生干扰,无须进行预蒸馏处理,操作简便,快速。方法的相对偏差小于１０％,变异系数小于０７％,水样的加标收率为９６～１０７％。