城市供水管网抗震可靠性分析与设计优化

考虑管线震害发生的随机性,利用管线在地震作用下反应的二阶矩特征信息,采用带渗漏管网抗震可靠性分析的一次二阶矩方法,以华中地区某市主干供水管网为例,进行了基本烈度条件下的可靠度分析,结果表明,在低、中烈度条件下,供水管网中各节点均处于可靠状态;在高烈度条件下,节点主要处于可靠状态,局部处于严重不可靠、甚至出现断水状态。进一步地,基于微粒群优化算法,以管网年费用折算值为优化目标、管网拓扑结构与管径为优化参数、管网节点可靠度为约束条件,建立了新的供水管网抗震设计优化模型,并将供水管网所在区域的道路信息引入管网优化设计中,提出了管网拓扑的自动生成策略,从而形成了城市供水管网系统智能化抗震设计方法。数值算例表明,基于可靠度的抗震优化设计方法为风险-投资之间的合理均衡提供了理论基础,决策者可以据此选择所期望的最佳方案。     

单丝滤布优选及悬浮物特性对其过滤性能的影响

根据国标测定单丝滤布的孔径、过水通量及透水阻力,从而优选出过滤性能最优的滤布。探究了悬浮物粒径、浓度及比表面积对单丝滤布过水通量的影响,并采用HERMIA模型分析了单丝滤布的堵塞机理。实验结果表明:悬浮物粒径越大单丝滤布过水通量的下降越明显,过滤后悬浮物中位粒径与滤布孔径的比值均在0.36～0.46;悬浮物的浓度越高、比表面积越小,在滤布表面的架桥作用越强,形成的滤饼层孔隙越小,滤布越容易被污染。     

乌鲁木齐城市土壤与灰尘粒径空间分布特征

结合野外调研的基础,按照四分法采集乌鲁木齐市城市土壤与城市灰尘样品共计306个,利用激光粒度仪和ArcGIS分析了城市土壤与灰尘样品的全粒径(0.02～2 000μm)组成与空间分布特征。研究结果表明:乌鲁木齐城市土壤与灰尘在小粒径范围内空间分布差异不明显,城市土壤粒径主要集中在10～50μm,城市灰尘集中于100～250μm;城市重工业对城市土壤和灰尘小粒径颗粒分布影响更大,而城市商业、居住等为主的人类其他活动行为对大粒径颗粒影响更为显著。乌鲁木齐城市土壤可能对城市灰尘PM_1、PM_(2.5)、PM_(10)粒径分布的贡献比较突出,应从城市土壤、城市灰尘、颗粒物粒径空间分布、气象等因素综合考虑乌鲁木齐市大气污染的防控。     

中等变质程度软硬煤瓦斯放散规律研究

自主设计了煤粒瓦斯吸附-放散试验系统,以郑煤集团告成煤矿普遍存在的中等变质程度贫瘦软硬煤为研究对象,对比分析了贫瘦煤软硬煤前120 min瓦斯解吸规律,试验结果表明,瓦斯解吸初期软煤的解吸速度都大于硬煤的解吸速度,软煤在前30 min解吸量占总解吸累积量的84.07%以上,而硬煤仅为67.76%;对比了多种描述瓦斯解吸-扩散过程的经验公式,发现孙重旭式和文特式拟合效果最好,且相关指数的变化范围较小。     

速生杨木粉尘最小点火能的实验研究

为防止木材加工中木质粉尘燃爆事故的发生,以纤维板生产中常见的原材料速生杨木粉尘作为研究对象,在分析粉尘粒径分布、元素分析、工业分析及形貌特征的基础上,采用1.2 L哈特曼管对3种不同粒径（0~50,＞50~96,＞96~180 μm）速生杨木粉尘进行最小点火能实验,探究点火延迟时间、喷粉压力、质量浓度和粒径分布对速生杨木粉尘最小点火能的影响及变化规律。研究结果表明:在质量浓度为500 g/m3时,分别增加点火延迟时间和喷粉压力,最小点火能都先减小后增大;最佳点火延迟时间和最佳喷粉压力分别为120 ms和120 kPa;粒径对最佳点火延迟时间和最佳喷粉压力无显著影响。在点火延迟和喷粉压力分别为120 ms和120 kPa条件下,最小点火能随质量浓度的增加先减小后增大。粉尘粒径与最小点火能呈正相关性,3种样品的最小点火能分别为1~3,1~3和7~13 mJ,对应的敏感质量浓度分别为500 ,750和1 250 g/m3,属于特别着火敏感性粉尘。     

人工煤气管道萘颗粒沉积规律研究

针对萘在人工煤气管道中沉积会造成管道堵塞,影响管道的安全运行的这一问题,以昆明人工煤气管道为例,运用计算流体动力学软件Fluent,选用离散相模型和雷诺应力模型,对水平直管、水平弯管和三通管进行萘颗粒沉积的数值模拟,对于不同的管径、弯曲比、管径比,分别分析萘颗粒直径、入口速度、温度及压力对萘颗粒沉积的影响。研究结果表明:水平直管、水平弯管、三通管中的萘颗粒沉积率与颗粒粒径成正相关关系,而与气流入口速度、压力成负相关关系;萘颗粒在人工煤气管道中的沉积率主要受颗粒直径、气流入口速度的影响;萘颗粒的沉积率随着水平直管的管径增大而增大,随着水平弯管的弯曲比增大而增大,随着三通管的管径比增大而先增大后减小;可通过适当增大管内煤气输送速度、压力,降低温度来降低萘颗粒在人工煤气管道中的沉积速度,进而减少萘颗粒沉积的发生。     

大气混浊度系数和气溶胶粒子数的关系

本文根据气溶胶消光特性——气溶胶粒子光学厚度是消光波长的函数,采用随机的最小二乘技术;数值反演了垂直气柱中气溶胶粘子大小分布,并且对反演的气溶胶粒子谱分布,采用数值积分算出半径大于0.3μm气溶胶粒子总数,求得了大气混浊度系数和半径大于0.3μm气溶胶粒子总数之间关系,用太原市实测气溶胶粒子数资料验证,效果较好.     

Norwegian Meteorological Institute’s real-time dispersion model snap (Severe Nuclear Accident Program): Runs for ETEX and ATMES II experiments with different meteorological input

The Norwegian Meteorological Institute (DNMI) has developed and implemented for operational use a real-time dispersion model Severe Nuclear Accident Program (SNAP) with capability for predicting concentrations and depositions of the radioactive debris from large accidental releases. SNAP has been closely linked to DNMI’s operational numerical weather prediction (NWP) models.How good are these predictions? Participation in ETEX has partly answered this question. DNMI used SNAP with LAM50S giving meteorological input for these real-time dispersion calculations. LAM50S Limited Area Model with 50 km grid squareswas DNMI’s operational NWP model in 1994 when ETEX took place.In this article we report on how SNAP performed in the first of the ETEX releases in near-real-time mode, using LAM50S—and in hindcast mode for ATMES II, using “ECMWF 1995: ETEX Data set (ATMES II)”as meteorological input data. These two input data sets came from NWP models with quite different characteristics but with similar resolution in time and space.The results from these dispersion simulations matched closely. Deviations early in the simulation period shrank to insignificant differences later on. Since both input data sets were based on “weather analysis” and had similar resolution in space and time, SNAP described the dispersion of the released material very similar in these two simulations.     

Particulate Matter Over A Seven Year Period in Urban and Rural Areas Within, Proximal and Far from Mining and Power Station Operations in Greece

Lignite mining operations and lignite-fired power stations result in major particulate pollution (fly ash and fugitive dust) problems in the areas surrounding these activities. The problem is more complicated, especially, for urban areas located not far from these activities, due to additional contribution from the urban pollution sources. Knowledge of the distribution of airborne particulate matter into size fraction has become an increasing area of focus when examining the effects of particulate pollution. On the other hand, airborne particle concentration measurements are useful in order to assess the air pollution levels based on national and international air quality standards. These measurements are also necessary for developing air pollutants control strategies or for evaluating the effectiveness of these strategies, especially, for long periods. In this study an attempt is made in order to investigate the particle size distribution of fly ash and fugitive dust in a heavy industrialized (mining and power stations operations) area with complex terrain in the northwestern part of Greece. Parallel total suspended particulates (TSP) and particulate matter with an aerodynamic diameter less than 10 μm (PM10) concentrations are analyzed. These measurements gathered from thirteen monitoring stations located in the greater area of interest. Spatial, temporal variation and trend are analyzed over the last seven years. Furthermore, the geographical variation of PM10 – TSP correlation and PM10/TSP ratio are investigated and compared to those in the literature. The analysis has indicated that a complex system of sources and meteorological conditions modulate the particulate pollution of the examined area.     

基于虚拟现实技术的喷射火事故三维动态仿真及应用

基于Shell模型的原理和计算方法,把喷射火焰视为近似倒立圆台形,构建了不同风向影响下的喷射火三维模型,运用虚拟现实技术和三维可视化技术对喷射火事故进行模拟与仿真。以Delphi和OpenGL/GLScene为开发工具,实现了喷射火三维模型的程序化与三维场景绘制,同时引入粒子特效系统,实现了喷射火焰燃烧的实时动态仿真,完成了喷射火三维动态可视化软件系统的开发。最后,利用该系统进行实例分析。应用表明:虚拟现实技术与事故后果模拟相结合,使整个系统实现实时性和形象性的统一,虚拟现实技术在化工行业具有广泛应用前景,也为事故后果预测评估提供科学依据。