A multi-component two-phase flow algorithm for use in landfill processes modelling

This paper describes the finite difference algorithm that has been developed for the flow sub-model of the University of Southampton landfill degradation and transport model LDAT. The liquid and gas phase flow components are first decoupled from the solid phase of the full multi-phase, multi-component landfill process constitutive equations and are then rearranged into a format that can be applied as a calculation procedure within the framework of a three dimensional array of finite difference rectangular elements.The algorithm contains a source term which accommodates the non-flow landfill processes of degradation, gas solubility, and leachate chemical equilibrium, sub-models that have been described in White and Beaven (2013).The paper includes an illustration of the application of the flow sub-model in the context of the leachate recirculation tests carried out at the Beddington landfill project. This illustration demonstrates the ability of the sub-model to track movement in the gas phase as well as the liquid phase, and to simulate multi-directional flow patterns that are different in each of the phases.     

DTRO工艺处理垃圾渗滤液的研究

垃圾渗滤液浓度高、成分复杂，难以处理，常规生化处理方法存在缺点，碟管式反渗透(DTRO)是针对垃圾渗滤液的水质特点而设计的，出水水质好，受进水水质影响很小，在国外的垃圾渗滤液处理中应用广泛。在分析DTRO工艺特点的基础上，探讨了两级DTRO工艺流程、特点、机理和浓缩液的处理方法，并论述了DTRO运行参数对膜片性能的影响。掌握系统运行和膜清洗时各项参数对膜性能的影响趋势，优化预处理工艺对降低处理成本，指导同类工艺的优化操作具有一定的参考价值。     

A new approach to estimation of methane emission rates from landfills

Methane emission monitoring has become increasingly essential for diffusive area sources, especially for landfills, which contribute to a significant fraction of the total anthropogenic methane emission globally. Statutorily, methane emission rate from landfills in Germany shall be examined on a semiannual basis; however, an appropriate approach has yet to be developed and adopted for general use. In this study, a new method is proposed based on experimental results, which utilizes a TDLAS (Tunable Diode Laser Absorption Spectroscopy) instrument – GasFinder2.0® system and a dispersion model LASAT (Lagrangian Simulation of Aerosol Transport) as the measurement device and calculation model, respectively. Between April 2010 and December 2011, a research project was conducted at a pilot scale landfill in the south of Germany. Drawing on the extensive research into this pilot project, an effective strategy of measurement setup was determined. Methane concentration was measured with GasFinder2.0® system in the upstream and downstream sections of the project site, while wind and turbulence data were measured simultaneously by an ultrasonic anemometer. The average methane emission rate from the source can be calculated by using the results as input data in the dispersion model. With this method, site-specific measurement approaches can be designed for not only landfills, but also different diffusive area sources with less workload and lower cost compared to conventional FID (Flame Ionization Detector) method.     

Experimental and life cycle assessment analysis of gas emission from mechanically–biologically pretreated waste in a landfill with energy recovery

The global gaseous emissions produced by landfilling the Mechanically Sorted Organic Fraction (MSOF) with different weeks of Mechanical Biological Treatment (MBT) was evaluated for an existing waste management system. One MBT facility and a landfill with internal combustion engines fuelled by the landfill gas for electrical energy production operate in the waste management system considered. An experimental apparatus was used to simulate 0, 4, 8 and 16 weeks of aerobic stabilization and the consequent biogas potential (Nl/kg) of a large sample of MSOF withdrawn from the full-scale MBT. Stabilization achieved by the waste was evaluated by dynamic oxygen uptake and fermentation tests. Good correlation coefficients (R²), ranging from 0.7668 to 0.9772, were found between oxygen uptake, fermentation and anaerobic test values. On the basis of the results of several anaerobic tests, the methane production rate k (year^?1) was evaluated. k ranged from 0.436 to 0.308 year^?1 and the bio-methane potential from 37 to 12 N m³/tonne, respectively, for the MSOF with 0 and 16 weeks of treatment. Energy recovery from landfill gas ranged from about 11 to 90 kW h per tonne of disposed MSOF depending on the different scenario investigated. Life cycle analysis showed that the scenario with 0 weeks of pre-treatment has the highest weighted global impact even if opposite results were obtained with respect to the single impact criteria. MSOF pre-treatment periods longer than 4 weeks showed rather negligible variation in the global impact of system emissions.     

老港填埋场渗滤液性质随工艺变化研究

经老港填埋场渗滤液处理系统的各处理单元处理后的流出液,用不同孔径的系列膜进行了梯度分离。分离前后的渗滤液进行了TOC、TP、TN、氨氮和可溶性P等参数的测定,并建立了各参数与不同孔径膜的关系。结果表明,此工艺对老港填埋场渗滤液的处理具有一定的功效;随着处理工艺的进行,渗滤液的组成发生了较大的改变,其中细胶体部分的百分含量增加,而可溶性部分降低;渗滤液的绝大部分污染物质集中于可溶性部分,而渗滤液中的P主要与大分子的悬浮物和粗胶体结合。     

白泥对填埋场垃圾降解的影响实验研究

在4个相同的密封聚乙烯塑料罐中,分别装填相同组分和重量的青岛市居民区的生活垃圾,并且在4个罐中按不同比例添加白泥,与垃圾混合均匀。实验模拟填埋场的环境条件。定期监测4个罐渗滤液的水质变化,分析比较白泥的添加及添加量的多少对渗滤液的衰减的影响。实验结果表明,白泥的添加能够向反应系统提供一定数量的碱度,可以防止反应系统因出现酸过度累积而受到抑制,在一定程度上加快了垃圾的降解进程。这不仅对于减轻渗滤液处理设施的负荷、加速填埋场的稳定化起着积极作用,而且可以为白泥的资源化利用提供一个可行的途径。     

Assessing the demand of solid waste disposal in urban region by urban dynamics modelling in a GIS environment

The twentieth century saw a dramatic increase in the production of urban solid waste, reflecting unprecedented global levels of economic activity. Despite some efforts to reduce and recover the waste, disposal in landfills is still the most usual destination. However, landfill has become more difficult to implement because of its increasing cost, community opposition to landfill siting, and more restrictive environmental regulations regarding the siting and operation of landfills. Moreover, disposal in landfill is the waste destination method with the largest demand for land, while land is a resource whose availability has been decreasing in urban systems. Shortage of land for landfills is a problem frequently cited in the literature as a physical constraint. Nonetheless, the shortage of land for waste disposal has not been fully studied and, in particular, quantified. This paper presents a method to quantify the relationship between the demand and supply of suitable land for waste disposal over time using a geographic information system and modelling techniques. Based on projections of population growth, urban sprawl and waste generation the method can allow policy and decision-makers to measure the dimension of the problem of shortage of land into the future. The procedure can provide information to guide the design and schedule of programs to reduce and recover waste, and can potentially lead to a better use of the land resource. Porto Alegre City, Brazil was used as the case study to illustrate and analyse the approach. By testing different waste management scenarios, the results indicated that the demand for land for waste disposal overcomes the supply of suitable land for this use in the study area before the year 2050.     

Design and implementation study of a Permanent Selective Collection Program (PSCP) on a University campus in Brazil

The selective collection and recycling of municipal solid waste are presented as stages of an integrated program of solid waste management to minimize the environmental impact of the treatment and final disposal of solid waste. Therefore, this program aims to save natural resources, such as energy and raw materials, in the manufacture of new products and to conserve areas for sites, such as to minimize the use of existing landfill sites, and to minimize the need for new waste treatment sites. A university is composed of educational professionals aware of their societal responsibilities, and, therefore, they play a fundamental role in the management of the university's solid waste. This study presents the design and implementation of a Permanent Selective Collection Program (PSCP) at the Federal University of Itajubá (Universidade Federal de Itajubá, UNIFEI), Itajubá-MG, Brazil. The material requirements for initiating the PSCP have been identified, and an action plan for continuous program improvement, which is initially based on the collection of performance indicator data for the PSCP campus, has been developed. Finally, the data from the PSCP performance indicators and software from the United States Environmental Protection Agency, the Landfill Gas Generation Model (LandGEM) and the Waste Reduction Model (WARM), were used to evaluate the impact of implementing PSCP in terms of energy and the generation of greenhouse gases (GHG). The results were promising, showing that there has been an improvement, since the inception of PSCP in 2006, in separating materials for selective collection, even though paper (41.00 wt%), plastic (6.00 wt%) and organic matter (26.00 wt%) are still highly generated wastes. The WARM simulations for a scenario in which 90% of the waste is sent for recycling resulted in an economy of −7 tCO₂ or −74.91 GJ (on an energy basis). The LandGEM (USEPA) simulations estimated 1424.60 kWh of energy in the peak production year.     

Treatment of Landfill Leachate Wastewater by Nanofiltration Membrane

Abstract

Nanofiltration (NF) membrane is an alternative lower energy membrane type compared to reverse osmosis membrane. NF is suitable for rejection of ions and molecules with molecular weight greater than 200 Da. In this study leachate wastewater from a sanitary landfill site in Malaysia was filtered through a NF membrane in order to determine the rejection capability of the membrane towards pollutants such as chemical oxygen demand (COD), conductivity, nitrate, ammonia-nitrogen, and heavy metals such as Pb, Cd, Cu, Zn, Fe. The NF membrane used was HL membrane, which under the atomic force microscope (AFM) imaging, showed visible discrete pores. The overall rejections of the pollutants were more than 85% except for nitrate and ammonia nitrogen. NF can be considered an alternative for advanced filtration especially within a hybrid treatment system combining biological–physical treatment and membrane filtration.     

Trends in waste plastics and recycling

Zero emission is an ambitious project aimed at the conversion of the conventional top-down or one-directional flow type production systems of modern society to those of a recycling type. The basic idea underlying this project is to understand in detail the material flow mechanism in a particular segment of society and to evaluate the transformability of the hitherto one-directional types of process into recycling types. The authors, members of the Zero-Emission Research Group of Japan, are investigating the material flow of plastics in Japan. The present work describes the features of this project, as well as the results obtained so far. Received: May 28, 1998 / Accepted: October 16, 1998