聚苯乙烯基离子交换纤维去除铅离子的应用研究

聚苯乙烯其离子交换纤维是一种理想的离子交换材料。它的特殊的物理形态决定它对一些有害气体如铅烟、颗粒铅等具有很好的净化作用，铅烟净化效率可达８０％；对水溶液中毒性铅离子去除率可达８６％。该纤维可做为治理毒性铅离子的材料。     

Ecotoxicity assessment of slag generated in the process of recycling lead from waste batteries

The aim of this study was to evaluate the possible toxicity of the leachate produced by the residues generated in the process of recycling lead from waste batteries. These residues are slag, which once formed, is characterised by its content in ferrous sulphide, sodium carbonate as well as residual coke from the process. It also contains, as minor components, lead and other heavy metals. The slag was stored and watered periodically over a period of 6 months, its composition changing until finally becoming inert, with no exothermal activity. The slag was leached, and its ecotoxicity was determined by means of the bioluminescence test, along with its content in heavy metals. The results obtained indicate a greater degree of toxicity in the residues with a shorter storage period than the established one, and which were therefore still in the phase of decomposition. However, in the samples taken on completing 6 months of storage, the EC₅₀ value of the leachate was found to be higher than 3000 mg/l. Hence, a storage period under suitable environmental conditions which leads to inactivity of the residue as well as a decrease in its ecotoxicity, is considered absolutely essential. At the same time, a direct relationship was observed between the lead content and the ecotoxicity value.     

Batch sorption dynamics and equilibrium for the removal of lead ions from aqueous phase using activated carbon developed from coffee residue activated with zinc chloride

Lignocellulosic materials are good precursors for the production of activated carbon. In this work, coffee residue has been used as raw material in the preparation of powder activated carbon by the method of chemical activation with zinc chloride for the sorption of Pb(II) from dilute aqueous solutions.The influence of impregnation ratio (ZnCl₂/coffee residue) on the physical and chemical properties of the prepared carbons was studied in order to optimize this parameter. The optimum experimental condition for preparing predominantly microporous activated carbons with high pore surface area (890 m²/g) and micropore volume (0.772 cm³/g) is an impregnation ratio of 100%. The developed activated carbon shows substantial capability to sorb lead(II) ions from aqueous solutions and for relative impregnation ratios of 75 and 100%, the maximum uptake is practically the same. Thus, 75% represents the optimal impregnation ratio.Batch experiments were conducted to study the effects of the main parameters such as contact time, initial concentration of Pb(II), solution pH, ionic strength and temperature. The maximum uptake of lead(II) at 25 °C was about 63 mg/g of adsorbent at pH 5.8, initial Pb(II) concentration of 10 mg/L, agitation speed of 200 rpm and ionic strength of 0.005 M. The kinetic data were fitted to the models of pseudo-first order and pseudo-second order, and follow closely the pseudo-second order model. Equilibrium sorption isotherms of Pb(II) were analyzed by the Langmuir, Freundlich and Temkin isotherm models. The Freundlich model gives a better fit than the others.Results from this study suggest that activated carbon produced from coffee residue is an effective adsorbent for the removal of lead from aqueous solutions and that ZnCl₂ is a suitable activating agent for the preparation of high-porosity carbons.     

Reclamation of wastes contaminated by copper,lead, and zinc

Waste materials containing toxic levels of copper, lead, and zinc, such as mine and smelter wastes, present difficult conditions for the establishment of vegetation. This article reviews the many attempts which have been made to reclaim these wastes. Inert wastes from mining and quarrying operations, such as slate quarry waste and certain colliery shales, seem to be good materials for reclaiming wastes contaminated by copper, lead, and zinc. Organic wastes, such as sewage sludge and domestic refuse, may provide only a temporary visual improvement and stabilization of the toxic materials.Nontolerant plant materials may often be planted directly on modern waste materials, which are less toxic than they were in the past. However, tolerant plant materials are needed for revegetating waste materials produced by early and more primitive extraction methods.     

PERCOLATION OF LEAD(II) AND CADMIUM(II) THROUGH TWO BENTONITES USED AS LANDFILL LINER

In order to prevent contamination of subsoil and groundwater by leachates containing heavy metals, montmorillonite linings are used on landfill bottoms. It is therefore important to understand ion uptake by this clay. In this study we have performed percolation of lead(II) and cadmium(II) through columns filled firstly with a technical bentonite and then with a reference bentonite. Elution curves provide an evaluation of metals retention. After the percolation step, columns are cut and metal ions are extracted to evaluate influence of side effects and soil depth on metal uptake. Moreover retentions of lead(II) and cadmium(II) are compared.     

Development of a probabilistic blood lead prediction model

A partially probabilistic blood lead prediction model has been developed, based on the US Environmental Protection Agency integrated exposure-uptake-biokinetic blood lead model (IEUBK model). This study translated the IEUBK model into a spreadsheet format. The uptake submodel incorporates uncertainty distributions for exposure and bioavailability parameters. The biokinetic submodel is duplicated with a table incorporating partitioning and decay of lead levels in the body. As a case study, the probabilistic model is applied to a lead exposure scenario involving a former smelter site in Sandy, Utah. The probabilistic model produces less biased estimates of means and standard deviations than the deterministic model. Parameter uncertainty is propagated in the model by the use of Monte Carlo simulation. Thus, sensitivity analysis is possible, and driving variables can be determined.     

Lead exposure in Saudi Arabia from the use of traditional cosmetics and medical remedies

Twenty Henna samples were collected and analysed for lead by electrothermal atomic absorption spectrophotometry after a microwave acid digestion procedure. The mean lead concentration was 5.50 g g^–1, with a range from 1.29 g g^–1 to 16.48 g g^–1. The data did not show a high concentration of lead in these samples. However, if we take into account the popular use of henna, the cumulative effects of prolonged exposure to low lead especially in children cannot be ruled out.     

Stable lead isotope profiles in smelter and general urban communities: a comparison of environmental and blood measures

High-precision lead isotope ratios and lead concentrations have been compared statistically and graphically in women of child-bearing age (n = 77) from two smelter communities and one general urban community to evaluate the relative contributions to blood lead of tissue lead stores and lead from the contemporaneous environment (soil, floor dust, indoor airborne dust, water, food). Blood lead (PbB) contents were generally low (e.g. <10 g dL^–1). Statistically significant isotopic differences in blood and environmental samples were observed between the three cities although isotopic differences in blood for individual subjects living in close proximity (200 m radius) was as large as the differences within a city. No single environmental measure dominated the biological isotope profile and in many cases the low levels of blood lead meant that their isotopic profiles could be easily perturbed by relatively small changes of environmental exposure. Apportioning of sources using lead isotopes is possibly not feasible, nor cost effective, when blood lead levels are <5 g dL^–1. Interpretations based on statistical analyses of city-wide data do not give the same conclusions as when the houses are considered individually. Aggregating data from multiple subjects in a study such as this obscures potentially useful information. Most of the measures employed in this study, and many other similar studies, are markers of only short-to-medium integration of lead exposure. Serial sampling of blood and longer sampling times, especially for household variables, should provide more meaningful information.     

推进我国减灾事业的三个支柱

本文阐述推进我国减灾事业的3个支柱,即:(1)发挥政府的主导作用;(2)重视科学技术在减灾中的作用;(3)依靠全民的参与。     

铅芯橡胶支座等效线性分析模型参数的研究

针对目前铅芯橡胶支座等效线性分析模型动力参数选取不够合理的现状 ,笔者通过对铅芯橡胶支座水平动态试验分析 ,系统研究了铅芯橡胶支座等效线性分析模型参数与其几何结构及外加动力荷载特性的关系。研究结果表明 :铅芯橡胶支座等效线性分析模型参数 (水平耗能、等效刚度及等效阻尼比 )主要由其本身的几何构造及组成材料决定 ,且在往复加、卸载循环过程中具有较好的稳定性。笔者对试验数据进行数学统计分析 ,归纳出一些经验公式 ,为其等效线性化动力分析模型参数的合理选取提供了计算方法 ,从而提高其动力分析结果的安全性。