推行无铅汽油对交通道路环境空气的影响分析

通过环境空气铅污染的调查对沈阳市推行无铅汽油，治理铅污染的效果进行分析评价。     

固相反射散射分光光度法测定化妆品中的铅

在酸性条件下 ,铅 ( )与玫瑰红酸钠形成紫红色络合物沉淀 ,该沉淀能被均匀地抽滤到一定表面积的滤纸上。本文采用固相反射散射分光光度法直接测定滤纸上负载的络合物的反射吸收值 AR,铅的含量在 0～ 8μg/ m L的范围内 AR与浓度有良好的线性关系。方法简便、快速 ,检出限为 0 .0 5μg/ m L。相对标准偏差为3.0 %。方法用于化妆品中铅的测定 ,结果令人满意     

经济手段对环境保护的作用

经济手段对环境保护的作用王奇,李庆伦（沈阳市环境保护投资公司沈阳１１０００３）（东北大学表面所）ＩＭＰＲＯＶＩＮＧＴＨＥＴＲＥＡＴＭＥＮＴＥＦＦＣＴＯＦＷＡＳＴＥＷＡＴＥＲＣＯＮＴＡＩＮＩＮＧＬＥＡＤＡＮＤＡＣＩＤＢＹＳＣＩＥＮＴＩＦＩＣＭＡＮＡＧＥ...     

Current uses of the EPA lead model to assess health risk and action levels for soil

The EPA lead model predicts mean blood lead levels and risk of elevated blood lead levels in children based on lead uptake from multiple sources. In the latest model versions, environmental data from individual homes within a community can be used to predict the overall blood lead distribution and percent risk of exceeding a specific blood lead level (i.e. 10 g dl^–1). Recent criteria used by the EPA to evaluate this information include no more than 5% of houses with a greater than 5% lead risk, and a community weighted-average risk below 5%. Environmental (primarily soil) and blood lead data from a residential community near a smelter were used to illustrate recent uses of the model. Scheduled remediation in the community will remove soil for approximately 60% of the houses (i.e. those with lead levels > 1000 mg kg^–1). After remediation, the model results indicate a relatively low community risk (0.5–1.9%), although the percentage of houses with lead risks above 5% ranged from 3 to as high as 13%, depending on the variation in blood lead and assuming the model's 7 g dl^–1 increase in blood lead with each 1000 mg kg^–1 increase in soil lead level. A comparison of the limited blood lead data with soil lead levels below 1000 mg kg^–1, however, indicated no apparent relationship. Given these uncertainties, less invasive actions than additional soil removal (e.g. exposure intervention, monitoring conditions, and follow-up as necessary) may be appropriate under the new EPA guidance for lead in soil.     

原子吸收法测定大气中的铅

将采集有ＴＳＰ的过氯乙烯滤膜以ＨＮＯ３－ＨＣｌＯ４湿法消争，用火焰原子吸收法直接测定其中的铅，因无基体和背景干扰，测值可比性和准确度均较好，微观测定结果与宏观环境状况一致。     

土壤Pb、Cd测定过程中溶样方法的改进

用微波消解土壤,然后电热板加热驱酸的方法对土壤样品进行前期处理的条件,并与标准法相比较,克服了标准法中湿法溶样的缺点,该法溶样完全、简便快速、消耗试剂量少,相对标准偏差均小于4·8%,回收率分别在96·1%~102·3%和94·0%~98·7%之间,具有较好的精密度和较高的回收率。     

Rapid adsorption of toxic Pb(Ⅱ) ions from aqueous solution using multiwall carbon nanotubes synthesized by microwave chemical vapor deposition technique

Multiwall carbon nanotubes(MWCNTs) were synthesized using a tubular microwave chemical vapor deposition technique, using acetylene and hydrogen as the precursor gases and ferrocene as catalyst. The novel MWCNT samples were tested for their performance in terms of Pb(Ⅱ)binding. The synthesized MWCNT samples were characterized using Fourier Transform Infrared(FT-IR), Brunauer, Emmett and Teller(BET), Field Emission Scanning Electron Microscopy(FESEM) analysis, and the adsorption of Pb(Ⅱ) was studied as a function of p H,initial Pb(Ⅱ) concentration, MWCNT dosage, agitation speed, and adsorption time, and process parameters were optimized. The adsorption data followed both Freundlich and Langmuir isotherms. On the basis of the Langmuir model, Qmaxwas calculated to be 104.2 mg/g for the microwave-synthesized MWCNTs. In order to investigate the dynamic behavior of MWCNTs as an adsorbent, the kinetic data were modeled using pseudo first-order and pseudo second-order equations. Different thermodynamic parameters, viz., ΔH0, ΔS0and ΔG0were evaluated and it was found that the adsorption was feasible, spontaneous and endothermic in nature. The statistical analysis revealed that the optimum conditions for the highest removal(99.9%) of Pb(Ⅱ) are at p H 5, MWCNT dosage 0.1 g, agitation speed 160 r/min and time of 22.5 min with the initial concentration of 10 mg/L. Our results proved that microwave-synthesized MWCNTs can be used as an effective Pb(Ⅱ) adsorbent due to their high adsorption capacity as well as the short adsorption time needed to achieve equilibrium.     

利用玻壳厂铅尘生产三盐基硫酸铅的研究

介绍了由玻壳厂铅尘生产三盐基硫酸铅的原理，工艺流程及操作条件，该法充分 铅尘的有效成份，产品质量好，工艺简单易行，无二次污染，经济效益显著，为充分利用含铅废为和减少污染提供了一条有效途径。     

Losses to the environment from the multilevel cycle of anthropogenic lead

As a component of a multi-level study of the anthropogenic lead cycle for year 2000 (52 countries, 8 regions, and the planet), we have estimated the lead flows in seven emission streams: tailings, slag, fabrication and manufacturing, dissipation from use, hibernation, landfilling, and dispersion following product discard. For every 1 kg of lead put into end use, 0.5 kg is lost to the environment, largely due to landfilling and dissipation from use. From the standpoint of the receiving media, 1/3 of the losses are to uncontained solids on land and 48% of the losses are to containment facilities on land. On a country basis, the largest losses occur in the United States and China, which between them are responsible for about 32% of total global lead losses. On a per capita basis, the highest lead losses occurred in the United Kingdom, Belgium-Luxembourg, and Ireland.     

Metallic-phase lead in slag of municipal solid waste incineration ash and leaching characteristics

Metallic phases in slags and their influence on the leaching characteristics were investigated. The proportions of metallic phase in four slags were 0.028%, 0.24%, 1.87%, and 3.05% by weight. The lead content was 10–248 mg/kg in bulk slag after metal removal, while in the metallic phase it was 579–7390 mg/kg. Lead concentrations in the metallic phase were more than ten times higher than in slags after metal removal. Lead was distributed in the metallic phase at 2.0%, 8.3%, 10.3%, and 47.4%. The concentrations of all metallic elements in metallic phases were much higher than in bulk slag. Iron, copper, and nickel had accumulated in magnetic metals, while aluminum and zinc were found in nonmagnetic metals. As regards chromium, manganese, lead, and tin, the proportion of metallic phases depended on the slag samples. By removing metallic phases, both water and pH 4 leachable lead decreased. The basic principles of melting residues containing lead are the separation of lead as a metal in reductive melting, and the containment of lead ions into uniform glassy particles in oxidization melting. Melting slag can be seen to contribute to environmental preservation by facilitating the recycling of materials through the separation of metals from melting slag. Received: February 21, 2000 / Accepted: July 27, 2000