Printed wiring boards for mobile phones: characterization and recycling of copper

The popularization of mobile phones, combined with a technological evolution, means a large number of scrap and obsolete equipment are discarded every year, thereby causing economic losses and environmental pollution. In the present study, the printed wiring boards scrap of mobile phones were characterized in order to recycle some of the device components, using techniques of mechanical processing, hydrometallurgy and electrometallurgy. The use of the techniques of mechanical processing (milling, particle size classification, magnetic and electrostatic separation) was an efficient alternative to obtain a concentrated fraction (mainly iron in the magnetic fraction and copper in the conductive fraction) and another fraction containing polymers and ceramics. At the end of mechanical processing, a concentrated fraction of metals could be obtained with an average concentration of 60% copper. This concentrated fraction in metals was dissolved in aqua regia and sent to electrowinning to recover 92% of the dissolved copper. The obtained cathodes have a copper content above 95%, which demonstrates the technical feasibility of recovery of copper using the techniques of mechanical processing, hydrometallurgy and electrometallurgy.     

机械工业职业卫生状况研究

对１２２４个工种（岗位）的工人接触生产性毒物、粉尘、高温的状况以及部分工种（岗位）的工人体力劳动强度状况进行了调研，初步了解到机械工业的主要职业危害因素、危害分布、危害程度和特征。     

Effect of Recycling on Material Properties of Glass-filled Polyethylene Terephthalate

Recycled plastics are considered low performance materials because their properties are expected to decrease drastically with recycling. The objective of this study was to characterize a 15 wt.% glass filled polyethylene terephthalate (rPET-15GF) using six recycle generations and four recycle ratios. Mechanical properties such as tensile strength, elastic modulus, and percent elongation to failure of the PET composite were determined for various recycle generations and recycle ratios. Results show that the mechanical properties of rPET-15GF decrease slightly per recycle generation. In contrast, thermal properties of rPET-15GF were not at all affected by the recycling process. This data demonstrates that recycled glass filled PET can be used effectively to fabricate components without significantly affecting their mechanical performance.     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.     

圆锥形零件冲压成形过程分析

通过分析圆锥形零件变形毛坯上不同部分在成形中的作用,揭示了该类零件的冲压成形特点,得出了悬空侧壁部分的变形状态是该类零件成形的关键,而径向拉应力是实现侧壁部分成形的必要条件,同时也是这部分冲压成形成败的关键。为此,经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式,为进一步研究提供了理论基础。     

Purification and Properties of a Poly (β-hydroxybutyrate) Depolymerase From Penicillium sp.

An extracellular poly (β-hydroxybutyrate) (PHB) depolymerase was purified from a Penicillium sp. DS9701-09a by centrifugation, ultrafiltration, precipitation and gel filtration chromatography. The specific activity of the purified enzyme was 37.9-folds higher than that of the culture supernatant and the recovery yield was 11.8%. The PHB deploymerase molecular mass was 44.8 kDa from analysis of both Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and Matrix-assisted laser desorption-time-of-flight (MALDI-TOF) mass spectrometer. The isoelectric point of 6.7 for the enzyme was determined by a two-dimensional electrophoresis. The optimum enzyme activity was observed at a temperature of 50 °C and pH 5.0. The apparent K _m of the enzyme was found to be 1.35 mg/mL. The PHB depolymerase consisted of 16 kinds of normal amino acids. The secondary structure of the enzyme was determined by CD spectrum. α-helix and β-turn were found to be 66% and 34% for the enzyme without ammonium sulphite. Chemical inhibition on the PHB depolymerase activity was examined and EDTA was found to have a significantly inhibitory effect.     

形变马氏体对奥氏体不锈钢封头性能的影响

奥氏体不锈钢因其优异的性能,被广泛应用于石油化工特种设备领域。本文针对常见的形变马氏体致奥氏体不锈钢封头泄露这一失效现象,阐述形变马氏体的产生机理、影响因素以及其对封头性能的影响,并提出相应的预防措施,旨在为不锈钢封头的制造和安全稳定运行提供参考,以减少失效事故的发生。     

城市生活垃圾焚烧灰渣及其性质分析

2002年，上海有2座生活垃圾焚烧厂将点火运动。每年将产生约18万t左右的焚烧灰渣。在决定灰渣的最终处理处置方案前，应对焚烧灰渣的性质有全面的了解。详细介绍了国外城市生活垃圾焚烧灰渣甚至生位置的不同分类，并介绍了各类灰渣的物理化学性质和工程性质，以及其重金属的浸出特征。对灰渣处理放置或有效利用时需注意的问题作了分析。     

机械产品安全性评价的研究

产品的本质安全化,是改善劳动条件,提高全社会安全水平的重要保障。产品的安全性评价,是判断产品本质安全程度的主要依据。本文以机械产品为例,在调查研究和统计分析的基础上,运用统计权数理论和模糊综合评判方法,提出了机械产品安全性评价指标体系和量化方法。     

机械零件的粉末冶金成形方法

此文主要介绍了几种较实用和新发展的机械零件的粉末冶金成形方法,包括Olivetti法,螺旋形状零件成形法,粉末注射成形,组合烧结成形,粉末锻造和旋转锻造。