Institutional Constraints on Cost‐Effective Water Management: Selenium Contamination in Colorado's Lower Arkansas River Valley

Ground and surface water selenium (Se) contamination is problematic throughout the world, leading to harmful impacts on aquatic life, wildlife, livestock, and humans. A groundwater reactive transport model was applied to a regional‐scale irrigated groundwater system in the Lower Arkansas River Basin in southeastern Colorado to identify management practices that remediate Se contamination. The system has levels of surface water and groundwater Se concentrations exceeding the respective chronic standard and guidelines. We evaluate potential solutions by combining the transport model with an assessment of the cost to employ those practices. We use a framework common in economics and engineering fields alike, the Pareto frontier, to show the impact of four different best management practices on the tradeoffs between Se and cost objectives. We then extend that analysis to include institutional constraints that affect the economic feasibility associated with each practice. Results indicate that although water‐reducing strategies have the greatest impact on Se, they are the hardest for farmers to implement given constraints common to western water rights institutions. Therefore, our analysis shows that estimating economic and environmental tradeoffs, as is typically done with a Pareto frontier, will not provide an accurate picture of choices available to farmers where institutional constraints should also be considered.     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

Evaluating the impact of uncertainty and variability on the value chain optimization of a forest biomass power plant using Monte Carlo Simulation

Mathematical programming models have been used to optimize the design and management of forest bioenergy supply chains. A deterministic mathematical model is beneficial for making optimum decisions; however, its applicability to real-world problems may be limited because it does not capture all the complexities, including uncertainties in the parameters, in the supply chain. In this paper, a combination of Monte Carlo Simulation and optimization model is used to evaluate the impact of uncertainty in biomass quality, availability and cost, and electricity prices on the supply chain of a forest biomass power plant. The optimization model is a deterministic mixed integer non-linear model with monthly time steps over a 1-year planning horizon. Variability in biomass quality, i.e. moisture content (MC) and higher heating value (HHV), based on the historical data of a real case study is studied in detail and fitted probability distributions are used in the model, while for electricity prices different scenarios are considered. The results show that the impact of variability in the MC on profit is higher than that of uncertainty in HHV. It is observed that the annual profit ranges between $13.3 million and $17.9 million in the presence of all possible uncertainties while its average is $15.5 million. Uncertainty in biomass availability and cost and electricity price results in the risks of having annual profit of less than $14 million and low monthly storage levels.     

洪泛区林地的开发对鱼类栖息地面积的影响模拟

洪泛区的开发利用,必然会导致洪泛区林地糙率的改变。河漫滩也是河流洪泛区的一部分。洪泛区糙率的减小,会使河水流速增大,从而减小鱼类可用栖息地面积。因此,在洪水发生时,为了给鱼类提供避险场所,保护有效栖息地面积,需研究洪泛区林地的开发对鱼类的影响。利用River 2D软件模拟在一定频率的洪水条件下,不同的河漫滩糙率对应的鱼类栖息地加权可用面积(WUA),分析了糙率的改变对河流鱼类栖息地的影响。结果表明:随着河漫滩糙率的降低,加权可用面积(WUA)逐渐减小,河漫滩范围内WUA的变化幅度比较大,河漫滩的特性对鱼类栖息地面积的影响很大。洪泛区植被的砍伐,会使鱼类栖息地面积减小。因此,应防止洪泛区的过度开发,保护河流生态环境。     

Economic and environmental value stream map (E2VSM) simulation for multi-product manufacturing systems

Value stream mapping (VSM) is a well-accepted tool within lean manufacturing concept which is often used for analysing and designing the flow of materials and information required to manufacture a product. However, the analysis is static and single product oriented, which fails to cope with either the variation of production plan or a multi-product environment. In addition, the environmental impact of a manufacturing system is highly associated with the dynamic consumption of energy and resources. Despite the recent integration of VSM with simulation or environmental studies (in the domain of energy efficiency), still neglected is the dynamic assessment of all the resources involved in a multi-product production environment. This paper presents a methodology for modelling multi-product manufacturing systems with dynamic material, energy and information flows with the aim to generate economic and environmental value stream maps (E²VSM). The proposed methodology is validated with an industrial case.     

VIC模型与SWAT模型在中小流域径流模拟中的对比研究

结合GIS与RS技术的分布式水文模型已成为当今水文界研究的重点。从气象与水文水资源学科交叉的角度对分布式水文模型VIC模型与SWAT模型进行研究,并将其应用于白莲河流域,以此探讨该模型在中小流域的适用性。模拟结果表明,VIC模型与SWAT模型在白莲河流域率定期与检验期的模拟效果相差很小。SWAT模型的效率系数与相关系数略高一些,SWAT模型的模拟效果比较平均,每年相差不大;但VIC模型在1995年和1999年模拟效果明显好于其它年份,尤其在2002年,VIC模型模拟的洪峰与实测的相差较大,从而影响总体的效率系数偏低,而SWAT模型模拟的更接近实测值。研究结果表明两种模型对于我国中小流域的径流模拟具有一定的适用性.     

Monte Carlo analysis of field water flow comparing uni- and bimodal effective hydraulic parameters for structured soil

Soil structure critically affects the hydrological behaviour of soils. In this paper, we examined the impact of areal heterogeneity of hydraulic properties of a structured soil on soil ensemble behaviour for various soil water flow processes with different top boundary conditions (redistribution and drainage plus evaporation and infiltration). Using a numerical solution of the Richards' equation in a stochastic framework, the ensemble characteristics and flow dynamics were studied for drying and wetting processes observed during a time interval of ten days when a series of relatively intense rainfall events occurred. The effects of using unimodal and bimodal interpretative models of hydraulic properties on the ensemble hydrological behaviour of the soil were illustrated by comparing predictions to mean water contents measured over time in several sites at field scale. Although the differences between unimodal and bimodal fitting are not significant in terms of goodness of fit, the differences in process predictions are considerable with the bimodal soil simulating water content measurements much better than unimodal soil. We also investigated the relative contribution of the soil variability of each parameter on the variance of the water contents obtained as the main output of the stochastic simulations. The variability of the structural parameter, weighting the two pore space fractions in the bimodal interpretative model, has the largest contribution to water content variance. The contribution of each parameter depends only partly on the coefficient of variation, much more on the sensitivity of the model to the parameters and on the flow process being observed. We observed that the contribution of the retention parameters to uncertainty increases during drainage processes; the opposite occurs with the hydraulic conductivity parameters.     

垃圾填埋场渗滤液运移规律分析与模拟

基于多孔介质流体力学、多相流以及土壤水动力学理论,利用理论分析和数值模拟相结合的方法,研究了垃圾填埋场中渗滤液运移过程的基本规律,并对填埋场底部可渗和不可渗2种情况下渗滤液的运移规律进行了模拟比对,研究成果可为填埋场渗滤液控制系统的设计和管理提供科学的理论依据和技术支持。     

Field Evaluation of DRAINMOD 5.1 Under a Cold Climate: Simulation of Daily Midspan Water Table Depths and Drain Outflows1

Abstract: The hydrologic performance of DRAINMOD 5.1 was assessed for the southern Quebec region considering freezing/thawing conditions. A tile drained agricultural field in the Pike River watershed was instrumented to measure tile drainage volumes. The model was calibrated using water table depth and subsurface flow data over a two‐year period, while another two‐year dataset served to validate the model. DRAINMOD 5.1 accurately simulated the timing and magnitude of subsurface drainage events. The model also simulated the pattern of water table fluctuations with a good degree of accuracy. The R² between the observed and simulated daily WTD for calibration was >0.78, and that for validation was 0.93. The corresponding coefficients of efficiency (E) were >0.74 and 0.31. The R² and E values for calibration/validation of subsurface flow were 0.73/0.48 and 0.72/0.40, respectively. DRAINMOD simulated monthly subsurface flow quite accurately (E > 0.82 and R² > 0.84). The model precisely simulated daily/monthly drain flow over the entire year, including the winter months. Thus DRAINMOD 5.1 performed well in simulating the hydrology of a cold region.     

Integrated model of simulated occupant injury risk and real medical costs

Introduction

The purpose of this study was to develop an integrated methodology that links occupant injury risk functions, estimated in the laboratory, with real world medical treatment costs by using the abbreviated injury score (AIS). Using our model, the expected medical treatment costs for crash injuries to various body regions and of different severities can be investigated.

Methods

First, the simulation results are compared with NHTSA crash data. We used a modified kinematics simulation model that incorporates an F = E^b function as a supplement to the previous Steffan's model to obtain a more accurate acceleration history a(t). Second, head injury criteria HIC₃₆ can be calculated from a(t), and we use the injury probability P as a function of HIC_36, as proposed by Kuppa, to obtain the injury risk function for various AIS values. Third, medical treatment cost models for various AIS values can be calculated by using a regression cost model with real world data. Finally, the injury risk function and medical treatment cost models are linked through AIS values. We establish an integrated methodology and predict medical costs and car safety data using real world police reports, medical treatment costs, and laboratory simulation results.

Results

Using head injuries in frontal crashes as an example, we focus on simulation parameters for different vehicle models, with and without airbags. We specifically examine impact closing speed, Delta-V, and impact directions.

Conclusion

Simulation results can be used to supplement insufficient real crash data, in particular ΔV, and injury risk results from police crash reports.

Impact on industry

The proposed integrated methodology may provide the vehicle industry with a new safety assessment method. Real crash data coupling provides consumers with more realistic and applicable information.