VIC模型与SWAT模型在中小流域径流模拟中的对比研究

结合GIS与RS技术的分布式水文模型已成为当今水文界研究的重点。从气象与水文水资源学科交叉的角度对分布式水文模型VIC模型与SWAT模型进行研究,并将其应用于白莲河流域,以此探讨该模型在中小流域的适用性。模拟结果表明,VIC模型与SWAT模型在白莲河流域率定期与检验期的模拟效果相差很小。SWAT模型的效率系数与相关系数略高一些,SWAT模型的模拟效果比较平均,每年相差不大;但VIC模型在1995年和1999年模拟效果明显好于其它年份,尤其在2002年,VIC模型模拟的洪峰与实测的相差较大,从而影响总体的效率系数偏低,而SWAT模型模拟的更接近实测值。研究结果表明两种模型对于我国中小流域的径流模拟具有一定的适用性.     

Monte Carlo analysis of field water flow comparing uni- and bimodal effective hydraulic parameters for structured soil

Soil structure critically affects the hydrological behaviour of soils. In this paper, we examined the impact of areal heterogeneity of hydraulic properties of a structured soil on soil ensemble behaviour for various soil water flow processes with different top boundary conditions (redistribution and drainage plus evaporation and infiltration). Using a numerical solution of the Richards' equation in a stochastic framework, the ensemble characteristics and flow dynamics were studied for drying and wetting processes observed during a time interval of ten days when a series of relatively intense rainfall events occurred. The effects of using unimodal and bimodal interpretative models of hydraulic properties on the ensemble hydrological behaviour of the soil were illustrated by comparing predictions to mean water contents measured over time in several sites at field scale. Although the differences between unimodal and bimodal fitting are not significant in terms of goodness of fit, the differences in process predictions are considerable with the bimodal soil simulating water content measurements much better than unimodal soil. We also investigated the relative contribution of the soil variability of each parameter on the variance of the water contents obtained as the main output of the stochastic simulations. The variability of the structural parameter, weighting the two pore space fractions in the bimodal interpretative model, has the largest contribution to water content variance. The contribution of each parameter depends only partly on the coefficient of variation, much more on the sensitivity of the model to the parameters and on the flow process being observed. We observed that the contribution of the retention parameters to uncertainty increases during drainage processes; the opposite occurs with the hydraulic conductivity parameters.     

Field Evaluation of DRAINMOD 5.1 Under a Cold Climate: Simulation of Daily Midspan Water Table Depths and Drain Outflows1

Abstract: The hydrologic performance of DRAINMOD 5.1 was assessed for the southern Quebec region considering freezing/thawing conditions. A tile drained agricultural field in the Pike River watershed was instrumented to measure tile drainage volumes. The model was calibrated using water table depth and subsurface flow data over a two‐year period, while another two‐year dataset served to validate the model. DRAINMOD 5.1 accurately simulated the timing and magnitude of subsurface drainage events. The model also simulated the pattern of water table fluctuations with a good degree of accuracy. The R² between the observed and simulated daily WTD for calibration was >0.78, and that for validation was 0.93. The corresponding coefficients of efficiency (E) were >0.74 and 0.31. The R² and E values for calibration/validation of subsurface flow were 0.73/0.48 and 0.72/0.40, respectively. DRAINMOD simulated monthly subsurface flow quite accurately (E > 0.82 and R² > 0.84). The model precisely simulated daily/monthly drain flow over the entire year, including the winter months. Thus DRAINMOD 5.1 performed well in simulating the hydrology of a cold region.     

Integrated model of simulated occupant injury risk and real medical costs

Introduction

The purpose of this study was to develop an integrated methodology that links occupant injury risk functions, estimated in the laboratory, with real world medical treatment costs by using the abbreviated injury score (AIS). Using our model, the expected medical treatment costs for crash injuries to various body regions and of different severities can be investigated.

Methods

First, the simulation results are compared with NHTSA crash data. We used a modified kinematics simulation model that incorporates an F = E^b function as a supplement to the previous Steffan's model to obtain a more accurate acceleration history a(t). Second, head injury criteria HIC₃₆ can be calculated from a(t), and we use the injury probability P as a function of HIC_36, as proposed by Kuppa, to obtain the injury risk function for various AIS values. Third, medical treatment cost models for various AIS values can be calculated by using a regression cost model with real world data. Finally, the injury risk function and medical treatment cost models are linked through AIS values. We establish an integrated methodology and predict medical costs and car safety data using real world police reports, medical treatment costs, and laboratory simulation results.

Results

Using head injuries in frontal crashes as an example, we focus on simulation parameters for different vehicle models, with and without airbags. We specifically examine impact closing speed, Delta-V, and impact directions.

Conclusion

Simulation results can be used to supplement insufficient real crash data, in particular ΔV, and injury risk results from police crash reports.

Impact on industry

The proposed integrated methodology may provide the vehicle industry with a new safety assessment method. Real crash data coupling provides consumers with more realistic and applicable information.     

道路交叉口冲突仿真分析

针对基于事故的安全评价在数量、周期、均值、随机性等方面以及基于现场冲突观测识别在主观性、可靠性、成本、指标全面性等方面存在的问题,提出基于冲突仿真的交叉口安全预评价分析方法:研究利用安全间接分析(SSAM)模型分析冲突的基本原理和冲突时间(TTC)、遭遇时间(PET)等分析指标的计算方法;以及利用VISSIM仿真软件进行冲突仿真分析应注意的策略。以邢台市某道路交叉口安全改善方案为例,进行改善前后冲突仿真的比较分析。研究结果表明,改善后在通行效率显著提升的同时,交叉、追尾、车道变换冲突的数量均显著减少,TTC值有所增加,说明改善后安全程度有所提升。笔者提出的方法和案例应用为道路交叉口改善措施的安全预评价提供了一种分析途径和有益借鉴。     

钢铁企业工作场所煤气泄漏扩散规律的研究

以钢铁企业管网煤气泄漏为研究对象,以煤气泄漏扩散规律为研究主题,在确定煤气泄漏相似于浮力射流的基础上,建立煤气泄漏扩散的数学模型。采用CFD软件PHOENICS数值模拟气体泄漏过程的速度场及其浓度分布。在已有煤气泄漏检测系统的基础上,选择性实验模拟煤气泄漏浓度与扩散时间、扩散方向的变化。数值模拟和实验模拟表明,虽然两种方法所得结果存在一定差异,从定性分析角度而言,却能够反映工作场所煤气泄漏后在有限空间内运移扩散的一般规律。     

铁路运输传爆药安全性评价

通过对现有传爆药安全性综合评价方法和装载加固评价方法进行改进,建立导弹铁路运输安全评价模型,运用改进型安全评价方法计算出导弹运输实际现实危险度。通过重大事故后果模拟法对运输过程中存在的最大量危险源进行分析、模拟,得出发生事故后产生的对人、物的危害范围。运用装载加固安全评价方法对装载加固方案进行评价,从而得知铁路运输导弹的危险综合程度,该评价模型可为铁路运输部门危险货物运输安全评价提供参考。     

贯通巷道风流流场数值模拟若干关键问题研究

根据计算流体力学基本理论,利用计算流体动力学(CFD)软件Fluent,运用三维k-ε湍流模型对贯通型巷道风流流场数值模拟中风流入口、出口位置对巷道风流流场分布的影响、湍动能k及湍动能耗散率ε的取值对模拟结果的影响等进行考察。通过研究确定模拟巷道的流体力学入口长度,确定模拟巷道出口位置;湍动能k及湍动能耗散率ε的取值对入口附近流动还没有充分发展区域拟解算的结果影响较大,而对流动充分发展的区域影响较小。将数值模拟风速值与理论计算风速值进行对比,模拟结果与计算结果非常一致,验证了数值模拟方法的正确性,为研究贯通型巷道风流传质过程、瓦斯运移规律及通风排污效率等提供了理论基础。     

大型相连容器中火焰传播的研究

为了进一步了解相连装置中粉尘爆炸的火焰传播行为和压力发展,为该结构的安全防护设计提供有价值的信息,采用大型实验装置对相连容器中玉米淀粉/空气混合物爆炸时的火焰传播行为进行了实验研究,同时采用已开发的数值模型对实验进行仿真计算。实验表明:粉尘浓度的变化对粉尘爆炸的火焰传播行为有重要影响;在粉尘浓度很低的情况下,火焰仍然能够在管道中加速传播且爆炸发展的最终结果相当猛烈。数值模型采用欧拉-拉格朗日方法模拟两相流现象,通过求解非稳态的湍流两相反应流守恒方程对实验进行二维仿真,计算结果与实验结果符合性较好,表明该模型可以很好地应用于粉尘爆炸火焰传播的研究。     

有限元数值模拟在巷道掘进中的应用研究

利用有限元分析进行数值模拟井下巷道分步开挖,对巷道应力、位移、应变进行了分析,改善了应力分布,有效减少了瓦斯涌出。本文利用数值模拟分步开挖并应用于实践,通过现场试验论证得出合理的分步开挖顺序改变了岩石应力集中,减少了瓦斯涌出量。