利用废渣废碱液年产3000t粒状五水偏硅酸钠工艺初步设计

介绍以铝矾土提取硫酸铝废渣和氧氯化锆副产废碱液为原料生产泡花碱 ,然后利用一次造粒法生产五水偏硅酸钠新工艺确定影响产品质量指标工艺因素。小试试验产品质量指标达到HG/T2 5 6 8- 94要求 ,工艺成本低 ,避免废碱液及废渣排放对环境的污染。     

Upgrading of organic waste: production of the copolymer poly-3-hydroxybutyrate-co-valerate by Ralstonia eutrophus with organic waste as sole carbon source

Two types of fermented organic waste (trade and industry waste and fruit and vegetable waste) were successfully used as a sole carbon source to produce poly-3-hydroxybutyrate-co-valerate (PHBV) by Ralstonia eutrophus (formerly Alcaligenes eutrophus) via oxygen limitation.The production of PHBV could be optimized by optimizing the oxygen transfer through the fermentor. Thereby, a peak concentration of 1.1 g PHBV per liter cell suspension, 40 w% of cell dry weight, was obtained at an aeration rate of 0.24 mol O₂/h·kg biomass. The yield of PHBV on the fatty acid concentration in the organic waste was 0.16 g polymer/g volatile organic matter. The process obtained, compares well with the commercial production process of PHBV based on glucose.     

射流曝气SBR技术在屠宰废水治理中的应用

介绍了应用射流曝气和序列间歇式活性污泥（ＳＢＲ）治理屠宰废水的工程实例。半年多的运行情况表明，该系统具有很好操作性和稳定性，当系统污水排放量或有机负荷发生较大波动时，有较好的缓冲适应能力，并能保证整个系统稳定达标。     

物理化学预处理与膜分离技术的应用

将物理化学预处理与膜分离技术深度处理结合应用于工业废水处理，可使其中的Ｃｒ６＋＜０．５ｍｇ／ｌ，Ｚｎ２＋＜２０ｍｇ／ｌ，ｐＨ６～９。用膜分离技术处理造纸废水可回收其中的木质素和糖份，回收率均为６０％左右。     

模拟医疗废物在管式电阻炉上的热解特性研究

在管式电阻炉上对由聚丙烯、面巾纸、纱布、医用脱脂棉、一次性口罩、医用乳胶手套等按一定比例组成的模拟医疗废物在氮气气氛进行了热解研究。重点探讨了10K／min，20K／min，30K／min和40K／min等不同升温速率对热解产物分布、产气特性和热解过程的影响。结果表明，随着温度升高，模拟废物的热解产生气体的主要成分逐渐由CO2和CO转变为C3H6、CH4、C2H6、C2H4和C3H8。同时，热解处理对模拟废物的减量化效果比较明显，固体残留率仅为5．61％～7．02％。而且，加热速率对模拟医疗废物热解过程的影响较大。     

固相微萃取-毛细管气相色谱法测定水中有机污染物

固相微萃取是一种快速、简便、集萃取浓缩于一体的样品前处理技术,具有分析快速、灵敏度高、无需有机溶剂的优点。用固相微萃取-毛细管气相色谱分析水中甲醇、丙酮、异丙醇、乙醇、乙腈、丙烯腈,检出限可达0.003～0.03mg/L。     

云南省利用水泥回转窑处置危险废物的前景

利用独特的设备和水泥窑的工艺特点,用废物代替水泥生产中的原材料,合理处置危险废物,使环境治理和循环经济达到有效的结合,是一项废物处理和资源化的新途径,是水泥生产企业可持续发展的方向之一,具有广阔的发展前景。     

城市生活垃圾综合处理系统的选择

以上海城市生活垃圾处置为对象，利用层次分析方法，选择了分选回收＋堆肥＋卫生填埋的综合处置系统，并且确定了堆肥方式应首先考虑仓式静态好氧堆肥。经过运行费比较，所选择的综合处置系统比现行的处置系统具有明显的优势。     

上海市医疗废物控制系统建设设想

根据上海的实际情况，借鉴国内外先进的医疗废物管理、处置经验，从控制的角度全面阐述了上海市医疗废物控制系统的目标、集中处置系统以及配套系统等各个方面建设的具体设想。     

Test of membrane bioreactor for waste water treatment in a petrochemical complex

Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper describes a membrane-bioreactor for treatment of waste water in a petrochemical complex. The experimental MBR was a lab scale one composed of an activated sludge bioreactor unit and an ultrafiltration membrane unit. The relationship of COD removal with MLSS and HRT in this MBR was studied. The effects of crossflow velocity, backwash interval and volume of flush liquid on the flux were discussed. The results showed that average removal of COD, oil, SS and turbidity in petrochemical waste water by the MBR was 91%, 86%, 92% and 99% respectively. The average removal of NH₃-N and total phosphorous was 85% and 82%. A coefficient of COD removal, k, was 0.017-0.080 L/(mg.d). The membrane flux maintained higher than 60 L/hm2 bar for 34 days without chemical cleaning when the velocity of crossflow was 3.5-3.9 m/s and the backwash interval was 30 minutes and backwash duration at 20 seconds. The results indicated that it is feasible for MBR technology to be used in petrochemical waste water treatment. The treated water could be considered as a source used to make up water for industrial cooling system or to be reused for other purposes.