Three Different Topics for Bioremediation Application on Soils and Waters Contaminated with Aromatic Compounds, by Using Immobilized Bacteria

Molecular techniques and modelling are presented as powerful tools required in the performance of efficient soil and water bioremediation systems. An Escherichia coli CC118-D strain was constructed by inserting the Klebsiella pneumoniae hpa B gene, coding for the unstable 3,4-dihydroxyphenylacetate 2,3-dioxygenase, into its chromosome. When the constructed strain was immobilized, both enzyme stability and viability increased along the studied period, in absence of antibiotic. We proposed this strategy as an approach to overcoming plasmid instability and to enhance enzyme activity and stability, avoiding antibiotic utilization. A model was developed to understand and predict the behaviour of bacteria and pollutants in a bioreactor system, considering: fluid dynamics, molecular/cellular scale processes and biofilm formation.     

Characteristics of roadside air pollution in Korean metropolitan city (Daegu) over last 5 to 6 years: temporal variations, standard exceedances, and dependence on meteorological conditions

The present study performed a roadside data analysis to provide baseline data for exploring associations between environmental exposure to four gaseous pollutants and health effects on residents living near roadways. The yearly roadside concentrations of CO and SO₂ showed a well-defined decreasing trend, whereas those of NO₂ and O₃ exhibited the reverse trend. In most cases, the diurnal trends of the roadside concentrations were well-defined for all seasons, plus the daytime concentrations were higher than the nighttime concentrations. In contrast to the other target pollutants, the daytime O₃ concentrations observed at the roadside sites were lower than those observed at the residential site, likely due to high-levels of fresh NO from traffic emissions that rapidly react with O₃, thereby reducing the O₃ roadside level. The Sunday roadside concentrations of CO, NO₂, and SO₂ were similar to or somewhat lower than the weekday concentrations. Conversely, for O_3, the Sunday roadside concentrations were similar to or somewhat higher than the weekday concentrations. The higher O₃ concentrations on Sunday may be due to the reduced titration from a decrease in NO_x emissions under VOC-limited conditions (low VOC/NO_x conditions). The monthly averages of O₃ concentrations exhibited the reverse seasonal variation to the other target compounds, with peak O₃ concentrations between April and June, and the second peak between August and October. It is also suggested that for O₃, the 8-h standard is more stringent than the 1-h standard, while for NO₂ and SO₂, the 1-h standard is more stringent than the 24-h standard. The multiple regression equations obtained from the relationship between the concentrations and five meteorological parameters indicated that the number and type of meteorological variables in the equations varied according to the pollutant, monitoring station, or season.     

滑坡体三维构造及稳定性分析

采用体元技术建立滑坡体真三维模型,通过基本三棱柱体构建具有复杂曲面结构的空间组合体,每个单元都赋予不同的属性,为滑坡体三维稳定性分析提供基本的前、后处理功能.以此为基础,并结合三维极限平衡分析计算方法,开发了相关的滑坡三维模拟与稳定性分析软件,并成功应用于清江库岸大型滑坡的三维仿真计算.     

臭氧-生物活性炭组合工艺中最佳臭氧投加剂量的确定

在水处理过程中投加臭氧,可提高饮用水的可生物降解性.臭氧氧化后继的生物过滤,可以减少水中可生物降解有机物数量,提高饮用水的生物稳定性.试验表明,臭氧投加量2～8mg/L可使AOC-P17,AOC-NOX和BDOC分别增加20.9%～85.5%,42.1%～158.2%和21.4%～84.4%.臭氧投加量为3mg/L时,AOC和BDOC增加得最多,即3mg/L的臭氧投量为最佳投加剂量.生物活性炭滤柱(BAC)出水AOC浓度(乙酸碳)均低于50μg/L,在35.9～46.6μg/L之间,属于生物稳定性水质.     

Promotion of hexadecyltrimethyleamine bromide to the damage of Alexandrium sp. LC3 by cupric glutamate

The effect of hexadecyltrimethyleamine bromide （HDTMAB） on the removal of A lexandrium sp. LC3 under cupric glutamate stress was investigated. Toxic effect of cupric glutamate on A lexandrium sp. LC3 was significantly promoted in the presence of HDTMAB, especially at 3.0 cmc of HDTMAB. It was found that the sulfhydryl group content of the cell decreased, while the malonaldehyde content and membrane permeability increased when A lexandrium sp. LC3 was treated with HDTMAB and cupric glutamate complex, compared with cupric glutamate alone. The data suggest that HDTMAB might stimulate the damage of A lexandrium sp. LC3 by enhancing the membrane permeability.     

无排泥运行MBR处理不同浓度氨氮废水及其生物特性

考察了水力停留时间(HRT)为10 h时无排泥运行下膜-生物反应器(MBR)处理不同浓度氨氮无机废水的运行性能及微生物特性.结果表明,在处理NH₄⁺-N≤500 mg/L的废水时,氨氮转化率可达99%且反应器内微生物增长缓慢,比硝化速率从0.2kg/(kg·d)升至0.52 kg/(kg·d);当NH₄⁺-N≥700 mg/L时,出水亚硝酸氮和氨氮相继出现明显累积,比硝化速率随之下降至0.4kg/(kg·d)以下,反应器内生物量从3 200 mg/L上升至6 700 mg/L.反应器中的氨氧化菌维持在10⁷CFU/mL,亚硝酸盐氧化菌从10⁶CFU/mL下降至10³CFU/mL.系统内的溶解性微生物产物(以TOC表示)升至65 mg/L后保持稳定,出水TOC一直维持在3～4mg/L;细胞外分泌物(EPS)在膜的截流作用下随运行时间的延长积累至600 mg/L.     

纳米Al_2O_3和Cd联合暴露对铜锈环棱螺体内Cd的生物积累和抗氧化酶活性的影响

金属氧化物纳米颗粒的广泛应用导致它们大量地释放到水环境中,其独特的理化性质有可能改变水环境中其他共存污染物(如重金属)的生态毒性。为评价沉积物中纳米氧化铝(Al2O3-NPs)对重金属Cd生态毒性的影响,采用底栖生物慢性暴露研究了Al2O3-NPs存在条件下Cd在底栖动物铜锈环棱螺体内生物积累的变化和Cd对肝胰脏抗氧化防御系统关键成分超氧化物歧化酶(SOD)与脂质过氧化指标丙二醛(MDA)以及Ⅱ相反应的关键酶谷胱甘肽-S-转移酶(GST)的影响。结果表明,低Cd浓度(5μg·g-1)时,Al2O3-NPs对Cd生物积累没有影响;中、高Cd浓度(25、100μg·g-1)时,Al2O3-NPs显著促进Cd的生物积累,Al2O3-NPs对Cd的生物转运具有明显的携带效应。低Cd浓度时,无Al2O3-NPs处理组和Al2O3-NPs处理组的SOD活性与对照组相比均没有显著差异;中Cd浓度时,SOD活性显著升高,而高Cd浓度时,SOD活性显著下降,而且Al2O3-NPs处理组的SOD活性显著低于无Al2O3-NPs处理组,Al2O3-NPs的存在加重了Cd对肝胰脏细胞的氧化胁迫或损伤。高Cd浓度时,无Al2O3-NPs处理组和Al2O3-NPs处理组的MDA水平均显著升高,但Al2O3-NPs处理组的MDA水平显著低于无Al2O3-NPs处理组,进一步证明Al2O3-NPs对Cd氧化损伤的增强作用。中、高Cd浓度时,无Al2O3-NPs处理组和Al2O3-NPs处理组的GST活性均显著下降,但Al2O3-NPs处理组的GST活性均显著低于无Al2O3-NPs处理组,同样说明了Al2O3-NPs对Cd毒性的增强作用。本研究提供了在沉积物-底栖动物体系中Al2O3-NPs促进重金属生物积累的证据,而且Cd毒性的变化与肝胰脏中Cd的生物积累水平的变化基本一致,在中、高Cd浓度下,由于Al2O3-NPs的存在显著促进了Cd的生物积累,因而增强了Cd对铜锈环棱螺的生态毒性。     

Al2O3为载体的催化剂净化贫燃汽车尾气研究

在富氧条件下,考察了C₃H₆和C₂H₅OH在Ag/Al₂O₃、In/Al₂O₃、Sn/Al₂O₃、Co/Al₂O₃、Pt/Al₂O₃和Ag/Al₂O₃+Pt/Al₂O₃组合催化剂上选择性还原NO的性能.结果表明,Ag/Al₂O₃具有最高的NO还原活性.在负载型过渡金属氧化物催化剂上,会生成显著量的CO,其HC和CO氧化转化温度也远远高于Pt/Al₂O₃催化剂.串联组合Ag/Al₂O₃+Pt/Al₂O₃催化剂可显著拓宽活性温度范围,促进HC和CO氧化,降低N₂O和CH₃CHO生成量.     

吊水壶尾矿坝渗流特性三维有限元分析

本文结合工程实例,以吊水壶尾矿坝为背景,建立现状尾矿坝三维模型,利用三维有限元法反演分析现状尾矿坝的渗流场,将计算结果与勘察的浸润面对比分析,验证模型的可靠性和合理性。基于此模型建立加高后的尾矿坝三维模型,计算正常蓄水位和设计洪水位两种工况下的渗流场,分析坝体浸润面埋深、滩长、渗流坡降等,结果表明,不设排渗措施时,尾矿坝干滩长度、浸润面埋深均能满足规范要求,而且尖流性态良好,满足渗透稳定。提出该尾矿坎可通过加高工程来进行渗流控制的建议。     

Impacts of emissions and meteorological changes on China’s ozone pollution in the warm seasons of 2013 and 2017

O₃ increment is mainly caused by changes in meteorology rather than emissions. Emission reduction is effective to reduce O₃ nationwide, especially in summer. Strengthened NO_x controls are necessary to meet the ambient O₃ standard. We have quantified the impacts of anthropogenic emissions reductions caused by the Air Pollution Control Action Plan and changes in meteorological fields between 2013 and 2017 on the warm-season O₃ concentration in China using a regional 3D chemical transport model. We found that the impact on daily maximum eight-hour (MDA8) O₃ concentration by the meteorological variation that mostly increased O₃ was greater than that from emission reduction, which decreased O₃. Specifically, the control measures implemented since 2013 in China have reduced SO₂, NO_x, PM_2.5, and VOC emissions by 33%, 25%, 30%, and 4% in 2017, while NH₃ emissions have increased by 7%. The changes in anthropogenic emissions lowered MDA8 O₃ by 0.4–3.7 ppb (0.8%–7.6%, varying by region and month), although MDA8 O₃ was increased slightly in some urban areas (i.e. North China) at the beginning/end of warm seasons. Relative to 2013, the average 2 m temperature in 2017 shows increments in North, North-east, East, and South China (0.34℃–0.83℃) and decreases in Central China (0.24℃). The average solar radiation shows increments in North, North-east, and South China (7.0–9.7 w/m²) and decreases in Central, South-west, and North-west China (4.7–10.3 w/m²). The meteorological differences significantly change MDA8 O₃ by -3.5–8.5 ppb (-8.2%–18.8%) with large temporal variations. The average MDA8 O₃ was slightly increased in North, North-east, East, and South China. The response surface model suggests that the O₃ formation regime transfers from NO_x-saturated in April to NO_x-limited in July on average in China.