排序方式: 共有33条查询结果,搜索用时 15 毫秒
21.
A series of dust explosion were conducted to compare the flame structure between nano and micron aluminium dusts. Two-color pyrometer technique is applied to have qualitative observation of flame development. Measurement of temperature indicates that explosion in micron aluminium dust clouds start in a single spot at 3000 K, in contrast, explosion in nano aluminium dust clouds start when hot powder accumulated to a certain amount at lower temperature of 2600 K. For micron aluminium dust clouds, flame at leading edge has the highest temperature and propagates in all directions. On the other hand, flame in nano aluminium dust clouds propagate only upward with the hottest part left behind at the downside. As flame propagates, the temperature at top edge gradually decreases from 2600 K to finally 2000 K, but temperature at bottom edge maintains in 3000 K with no significant displacement. The unevenness of flame structure is considered as the consequence of different particle densities, which suggests that the reaction of nano aluminium particles stays in molten state, meanwhile, the high surface area also leads to unignorable heat loss. 相似文献
22.
This paper describes experiences and results of experiments with several metallic dusts within the nanometer range. The nano dusts (aluminium, iron, zinc, titanium and copper) were tested in a modified experimental setup for the test apparatus 20 L-sphere (also known as 20-L Siwek Chamber), that enables the test samples to be kept under inert atmospheric conditions nearly until ignition. This setup was already introduced in earlier papers by the authors. It was designed to allow the determination of safety characteristics of nano powders under most critical circumstances (e.g. minimisation of the influence of oxidation before the test itself). Furthermore the influence of passivation on explosion behaviour is investigated and additional tests with deposited dust were carried out to describe the burning behaviour of all dusts. For a better characterisation all samples were tested with a simultaneous thermal analysis (STA). To minimise the influence of oxidation all samples were handled at inert conditions until shortly before ignition or start of the test respectively. 相似文献
23.
环境保护新曙光——纳米材料在环保中的应用 总被引:7,自引:0,他引:7
本文介绍了纳米TiO2光催化性的作用机理以及在环境保护中的应用,并对其应用前景及存在的问题作了简要地阐述。此外还介绍了纳米氧化锌及纳米稀土钙钛矿复合氧化物等纳米材料在环境保护中的应用。 相似文献
24.
A range of new nanomaterials to replace the active materials in lithium ion batteries are currently being studied and employed in an attempt to overcome various performance limitations of previous technologies. Nanomaterial production and manufacturing techniques appear to fit into a general trend towards more energy intensive production methods for high-tech goods. This does not necessarily imply an increase in lifecycle energy use; artefacts that consume or transform energy during use could possibly regain this increased initial input via increased efficiency in use. In particular, this paper highlights that larger gains could be possible if the artefact in question allows a given service to be provided via an alternative and more efficient system entirely.The lifecycle energy efficiencies of lithium ion batteries constructed from several new advanced materials are analysed with several different system boundaries. Although nanomaterials require more energy input to produce, the implications of nanomaterials for energy flows in the use phase (i.e. driving), and higher levels such as the architecture of future transport fuel production systems are much larger in magnitude than the initial lifecycle inputs for producing the materials in question. 相似文献
25.
In 2004, airborne particulate matter (PM) was collected for several aerosol episodes occurring in the southern region of Taiwan.
The particulate samples were taken using both a MOUDI (Micro-orifice Uniform Deposit Impactor) and a nano-MOUDI sampler. These
particulate samples were analyzed for major water-soluble ionic species with an emphasis to characterize the mass concentrations
and distributions of these ions in the ambient ultrafine (PM0.1, diameter <0.1 μm) and nano mode (PMnano, diameter <0.056 μm) particles. Particles collected at the sampling site (the Da-Liao station) on the whole exhibited a typical
tri-modal size distribution on mass concentration. The mass concentration ratios of PMnano/PM2.5, PM0.1/PM2.5, and PM1/PM2.5 on average were 1.8, 2.9, and 71.0%, respectively. The peak mass concentration appeared in the submicron particle mode (0.1 μm < diameter <1.0 μm).
Mass fractions (percentages) of the three major water-soluble ions (nitrate, sulfate, and ammonium) as a group in PMnano, PM0.1, PM1, and PM2.5 were 18.4, 21.7, 50.0, and 50.7%, respectively. Overall, results from this study supported the notion that secondary aerosols
played a significant role in the formation of ambient submicron particulates (PM0.1−1). Particles smaller than 0.1 μm were essentially basic, whereas those greater than 2.5 μm were neutral or slightly acidic.
The neutralization ratio (NR) was close to unity for airborne particles with diameters ranging from 0.18 to 1 μm. The NRs
of these airborne particles were found strongly correlated with their sizes, at least for samples taken during the aerosol
episodes under study. Insofar as this study is exploratory in nature, as only a small number of particulate samples were used,
there appears to be a need for further research into the chemical composition, source contribution, and formation of the nano
and ultrafine mode airborne particulates. 相似文献
26.
Risk associated with heavy metals in soil has been received widespread attention.In this study,a porous biochar supported nanoscale zero-valent iron(BC-nZVI) was applied to immobilize cadmium(Cd) and lead(Pb) in clayey soil.Experiment results indicated that the immobilization of Cd or Pb by BC-nZVI process was better than that of BC or nZVI process,and about 80% of heavy metals immobilization was obtained in BC-nZVI process.Addition of BC-nZVI could increase soil pH and organic matter(SOM).Cd or... 相似文献
27.
Xingguo Guo Qiuying Wang Ting Xu Kajia Wei Mengxi Yin Peng Liang Xia Huang Xiaoyuan Zhang 《Frontiers of Environmental Science & Engineering》2020,14(2):30
28.
Mercury(Hg)ranks number three,after arsenic(As)and lead(Pb),on the Substance Priority List of the Agency for Toxic Substances and Disease Registry(ATSDR,2019).M... 相似文献
29.
土壤污染修复技术研究进展 总被引:5,自引:0,他引:5
总结了当前针对污染土壤的物理化学、生物及联合修复技术研究进展,归纳了纳米材料、生物炭和表面活性剂等新兴修复材料的优缺点及应用情况。提出今后的研究方向为强化生物修复技术,开展联合修复技术、复合材料修复技术及土壤修复技术风险防范研究。 相似文献
30.
Aluminum salt coagulants were used prevalently in various water works.In this article,the effects of filtration on residual aluminum concentration and species distribution were researched by determining the concentration of diiferent aluminum species before and after single layer filter,double layer filter,and membrane filtration units.In the research,size exclusion chromatography(SEC)was used to separate colloidal and soluble aluminum,ion exchange chromatography(IEC)was used to separate organic and inorganic aluminum, and inductivity coupled plasma-atomic emission spectrometry(ICP-AES)was used to determine the aluminum concentration.The results showed that the rapid filtration process had the ability of removing residual aluminum from coagulant effluent water,and that double layer filtration was more effective in residual aluminum removal than single layer filtration,while nano filtration was more effective than micro filtration.It was found that when the residual aluminum concentration was below 1mg/L in sediment effluent,the residual aluminum concentration in treated water was above 0.2 mg/L.The direct rapid filtration process mainly removed the suspended aluminum.The removal of soluble and colloidal aluminum was always less than 10% and the natural small particles that adsorbed the amount of soluble or small particles aluminum on their surface were difficult to be removed in this process.Micro filtration and nano filtration were good technologies for removing aluminum;the residual aluminum concentration in the effluent was less than 0.05 mg/L. 相似文献