Catalytic ozonation treatment of papermaking wastewater by Ag-doped NiFe2O4: Performance and mechanism

The catalytic ozonation treatment of secondary biochemical effluent for papermaking wastewater by Ag-doped nickel ferrite was investigated. Ag-doped catalysts prepared by sol-gel method were characterized, illustrating that Ag entirely entered the crystalline of NiFe₂O₄ and changed the surface properties. The addition of catalyst enhanced the removal efficiency of chemical oxygen demand and total organic carbon. The results of gas chromatography-mass spectrometer, ultraviolet light absorbance at 254 nm and three-dimensional fluorescence excitation-emission matrix suggested that aromatic compounds were efficiently degraded and toxic substances, such as dibutyl phthalate. In addition, the radical scavenging experiments confirmed the hydroxyl radicals acted as the main reactive oxygen species and the surface properties of catalysts played an important role in the reaction. Overall, this work validated potential applications of Ag-doped NiFe₂O₄ catalyzed ozonation process of biologically recalcitrant wastewater.     

Reuse of nickel recovered from spent Ni–Cd batteries for the preparation of C/Ni and C/Ni/Pd layered electrodes for energy sources

Nickel recovered in the recycling process of Ni–Cd batteries was used as a main component of bath for electrodeposition of nickel onto carbon fabric in order to obtain C/Ni composite. A part of the obtained composite was additionally coated with a thin layer of palladium (C/Ni/Pd composite). All the materials were investigated to assess the possibility of their use in the processes of electrochemical storage (sorption/desorption) of hydrogen and electrochemical oxidation of methanol. The obtained results showed the composites to be active electrode materials in these processes. The electrodes exhibited high activity and cyclability, especially in the process of methanol oxidation due to electrocatalytic activity of both nickel deposited onto carbon fabric and the outer layer of porous palladium coating nickel substrate.     

Biosorption of copper, zinc, cadmium and nickel by Chlorella vulgaris

The sorption capacity of the microalga, Chlorella vulgaris, was investigated using different metals (Cu, Zn, Cd and Ni), in both monometallic and bimetallic solutions. The final metal concentrations were significantly low. In the case of copper, an acid pretreatment (at pH 3) of the biomass was required to avoid an excessive increase in pH and the subsequent precipitation of metal during tests. This pretreatment was not necessary for the rest of the metals. The study of the influence of pH led to a greater metal uptake at a higher pH, suggesting a clear competition between metal cations and protons during the biosorption process. The biomass concentration was also a relevant variable, and the best sorption capacities were achieved at the lowest biomass concentration. pH also had a great influence on the elution of the metal retained by the biomass. The best recovery yields were obtained for the lower pH of the eluent solution. Sorption isotherms were well fitted to the Langmuir model, for both single-metal and two-metal systems. In both cases, the biomass showed a greater affinity for Cd.     

A study of the extraction of vanadium and nickel in oil-fired fly ash

Annual production of oil-fired fly ash in Taiwan is approximately 43 000 tons, of this approximately 13 000 tons is electrostatically precipitated, the rest is cyclonically collected. Structurewise, both consist of porous unburned carbon, vanadium and nickel oxide, and water-soluble sulfate. Electrostatically precipitated fly ash contains large amounts of ammonium sulfate. If these ashes are not properly disposed of, they become environmental problems, such as dusting, leakage of acid liquids, and pollution with heavy metals. This paper discusses the experimental extraction of vanadium and nickel from oil-fired fly ash. The results indicated that leaching of oil-fired fly ash in 0.5 N of sulfuric acid led to an extraction of 65% vanadium, 60% nickel, and 42% iron, along with an increase in the concentration of sulfuric acid. When leached in 2 N sodium hydroxide solution, the extraction of vanadium was 80%, and the extraction of nickel was negligible. If leached in an ammonia water, the extraction of nickel increased, along with an increase in the concentration of ammonia in water. When leached with 4 N ammonia water, the extraction of nickel was 60%, the extraction of vanadium was less than that obtainable from leaching in sulfuric acid solution or in sodium hydroxide solution. If electrostatically precipitated fly ash was leached in a solution of 0.25 N ammonia water and 2 N ammonium sulfate, it would yield an extraction of 60% nickel and 8% vanadium—leading to a selective extraction of nickel. This study has established an extraction flowsheet in which fly ash was first leached in an ammoniacal solution containing ammonium sulfate to recover nickel. The leached residues were then leached in an alkaline solution to recover vanadium.     

Food utilization and growth of cutworm Spodoptera litura Fabricius larvae exposed to nickel,and its effect on reproductive potential

Food utilization and growth of the 5th and 6th instar Spodoptera litura Fabricius larvae, and its effect on reproduction potential was evaluated by feeding larvae diets with different doses of Ni for 3 generations. Dose-dependent relationships between Ni levels and food consumption and growth were variable with different larval developmental period and Ni exposure duration. RCR, AD and RGR of the 6th instar larvae were much more affected by Ni exposure than those of 5th instar larvae, and the effects were strongest in the 3rd generation. It was found that RCR was significantly stimulated after 1 and 20 mg kg⁻¹ Ni exposure, while AD was significantly inhibited after 1, 5, 10 and 40 mg kg⁻¹ Ni exposure. However, lower levels of Ni (?5 mg kg⁻¹) significantly increased and higher levels of Ni (?10 mg kg⁻¹) significantly decreased RGR. In 3 successive generations, 10 mg kg⁻¹ Ni significantly increased the ECI and ECD of the 5th instar larvae, and 5 mg kg⁻¹ Ni significantly increased the ECD of the 6th instar larvae. However, ECD were all significantly inhibited with 20 mg kg⁻¹ Ni exposure. Results also revealed that durations of larvae were shortened at low levels of Ni, but extended at high levels of Ni. Fecundity was inhibited by the highest Ni doses in each generation, while improved by low Ni doses in the 3rd generation. Hatching rates in all treatments were significantly decreased in a Ni dose-dependent manner. Study indicated that effects of Ni on these parameters were predominant with the increasing Ni exposure period.     

Effect of citric acid and EDTA on chromium and nickel uptake and translocation by Datura innoxia

EDTA and citric acid were tested to solubilize metals and enhance their uptake by Datura innoxia, chosen because of its ability to accumulate and tolerate metals. Two application modes were used on an industrial soil contaminated mainly by Cr and Ni. The results showed that citric acid was the most effective at increasing the uptake of Cr and EDTA for Ni. These results are consistent with the effectiveness of both chelants in solubilizing metals from the soil. The translocation factor (TF) of Ni was 1.6- and 6.7-fold higher than the control, respectively, for one and two applications of 1mmolkg(-1) EDTA. After two applications of 5 and 10mmolkg(-1) citric acid, the TF of Cr increased 2- and 3.5-fold relative to the control. Whatever the concentration, the application of EDTA modified the plant physiology significantly. For citric acid this was only observed with the highest dose (10mmolkg(-1)).     

Mapping aerial metal deposition in metropolitan areas from tree bark: a case study in Sheffield, England

We investigated the use of metals accumulated on tree bark for mapping their deposition across metropolitan Sheffield by sampling 642 trees of three common species. Mean concentrations of metals were generally an order of magnitude greater than in samples from a remote uncontaminated site. We found trivially small differences among tree species with respect to metal concentrations on bark, and in subsequent statistical analyses did not discriminate between them. We mapped the concentrations of As, Cd and Ni by lognormal universal kriging using parameters estimated by residual maximum likelihood (REML). The concentrations of Ni and Cd were greatest close to a large steel works, their probable source, and declined markedly within 500 m of it and from there more gradually over several kilometres. Arsenic was much more evenly distributed, probably as a result of locally mined coal burned in domestic fires for many years. Tree bark seems to integrate airborne pollution over time, and our findings show that sampling and analysing it are cost-effective means of mapping and identifying sources.     

Microbial community dynamics in uranium contaminated subsurface sediments under biostimulated conditions with high nitrate and nickel pressure

BACKGROUND, AIM, AND SCOPE: The subsurface at the Oak Ridge Field Research Center represents an extreme and diverse geochemical environment that places different stresses on the endogenous microbial communities, including low pH, elevated nitrate concentrations, and the occurrence of heavy metals and radionuclides, including hexavalent uranium [U(VI)]. The in situ immobilization of U(VI) in the aquifer can be achieved through microbial reduction to relatively insoluble U(IV). However, a high redox potential due to the presence of nitrate and the toxicity of heavy metals will impede this process. Our aim is to test biostimulation of the endogenous microbial communities to improve nitrate reduction and subsequent U(VI) reduction under conditions of elevated heavy metals. MATERIALS AND METHODS: Column experiments were used to test the possibility of using biostimulation via the addition of ethanol as a carbon source to improve nitrate reduction in the presence of elevated aqueous nickel. We subsequently analyzed the composition of the microbial communities that became established and their potential for U(VI) reduction and its in situ immobilization. RESULTS: Phylogenetic analysis revealed that the microbial population changed from heavy metal sensitive members of the actinobacteria, alpha- and gamma-proteobacteria to a community dominated by heavy metal resistant (nickel, cadmium, zinc, and cobalt resistant), nitrate reducing beta- and gamma-proteobacteria, and sulfate reducing Clostridiaceae. Coincidentally, synchrotron X-ray absorption spectroscopy analyses indicated that the resulting redox conditions favored U(VI) reduction transformation to insoluble U(IV) species associated with soil minerals and biomass. DISCUSSION: This study shows that the necessary genetic information to adapt to the implemented nickel stress resides in the endogenous microbial population present at the Oak Ridge FRC site, which changed from a community generally found under oligotrophic conditions to a community able to withstand the stress imposed by heavy metals, while efficiently reducing nitrate as electron donor. Once nitrate was reduced efficient reduction and in situ immobilization of uranium was observed. CONCLUSIONS: This study provides evidence that stimulating the metabolism of the endogenous bacterial population at the Oak Ridge FRC site by adding ethanol, a suitable carbon source, results in efficient nitrate reduction under conditions of elevated nickel, and a decrease of the redox potential such that sulfate and iron reducing bacteria are able to thrive and create conditions favorable for the reduction and in situ immobilization of uranium. Since we have found that the remediation potential resides within the endogenous microbial community, we believe it will be feasible to conduct field tests. RECOMMENDATIONS AND PERSPECTIVES: Biostimulation of endogenous bacteria provides an efficient tool for the successful in situ remediation of mixed-waste sites, particularly those co-contaminated with heavy metals, nitrate and radionuclides, as found in the United States and other countries as environmental legacies of the nuclear age.     

Use of diffuse reflectance spectrometry in spot test reactions for quantitative determination of cations in water

Diffuse reflectance spectroscopy can be successfully used for the quantitative determination of small amounts of pollutants like metals. The remission function was found to be linearly proportional to the concentration, when we applied the Kubelka–Munk equation. The color reactions of Cu(II), Co(II), and Ni(II) with dithiooxamide, were realised on filter paper. Reaction between Fe(III) and ammonium thiocyanate was realized on filter paper and gelatine matrix. All measurements were accomplished with a laboratory-constructed reflectometer. We have obtained a calibration curve by plotting the optical density of reflectance A_R vs log of the mol l⁻¹ concentration. Limits of detection at the 10⁻⁴ M level were estimated for all the compounds. Linear dynamic range extend over one order of magnitude and shows the potential of device for the quantitative analysis of environmental pollutants.     

Reuse of Fenton sludge as an iron source for NiFe2O4 synthesis and its application in the Fenton-based process

The potentially hazardous iron-containing sludge from the Fenton process requires proper treatment and disposal, which often results in high treatment cost. In this study, a novel method for the reuse of Fenton sludge as an iron source for the synthesis of nickel ferrite particles(NiFe_2O_4) is proposed. Through a co-precipitation method followed by sintering at 800°C, magnetic NiFe_2O_4 particles were successfully synthesized, which was confirmed by powder X-ray diffraction(XRD), scanning electronic microscopy(SEM), energy dispersive spectroscopy(EDS), Fourier transform infrared spectroscopy(FT-IR) and Raman spectroscopy. The synthesized NiFe_2O_4 could be used as an efficient catalyst in the heterogeneous Fenton process. In phenol degradation with H_2O_2 or NiFe_2O_4 alone, the phenol removal efficiencies within the reaction time of 330 min were as low as 5.9% ± 0.1% and 13.5% ±0.4%, respectively. However, in the presence of both NiFe_2O_4 and H_2O_2, phenol removal efficiency as high as 95% ± 3.4% could be achieved, indicating the excellent catalytic performance of NiFe_2O_4 in the heterogeneous Fenton process. Notably, a rapid electron exchange between_Ni II and_Fe III ions in the NiFe_2O_4 structure could be beneficial for the Fenton reaction. In addition, the magnetic catalyst was relatively stable, highly active and recoverable, and has potential applications in the Fenton process for organic pollutant removal.