水中有机污染物物理,化学处理技术的现状及发展趋势

在系统综述了水中有机污染物物化处理技术的研究与应用现状后，进行了分析与评价。认为对有机污染物具有“破坏性”的氧化法是水处理技术发展的方向，各种单一技术特别是“破坏性”技术和“非破坏性”技术之间的联用是水处理技术发展的又一趋势。     

煤氧化特性与影响因素实验研究

为分析自热临界温度和采空区漏风风速对煤自燃的影响,在常温(30℃)、中温(60℃)、不同通气量等条件下对滕东煤矿3下煤层煤样进行了煤炭自燃氧化规律实验。结果表明:煤样在60℃氧化所放出的CO量较30℃时高3.4~4.1倍,煤炭氧化速率上升梯度约1.35 ppm/℃;在恒温变通气量条件下,CO气体浓度呈现先减小后稳定的趋势,CO的释放量随通气量的增大而减小;在通气量为50 mL/min(采空区漏风为0.1 m/min)的条件下,煤氧化释放的CO量最大且煤氧化能力最强,应加强最易发生自燃漏风区域的密封防护。     

SVM application in hazard assessment: Self-heating for sulfurized rust

In order to assess the oxidation self-heating hazard of sulfurized rust, for particular ambient conditions in crude oil tanks, the support vector machine (SVM) technique is applied to predict the maximum temperature (T_max) of oxidation self-heating process. Five governing parameters are selected, i.e. the water content, mass of sulfurized rust, operating temperature, air flow rate and oxygen concentration in the respiratory/safety valve. The efficiency and validity of the SVM predictions are investigated in the case of two sets of data: more than 85 experiments performed in academic lab (China) and almost 17 additional results collected from existing literature. Two main steps are also discussed: the training process (on selected subsets of data) and prediction process (for the remaining subsets of data). It can be concluded that for both datasets the maximum temperature (T_max) values calculated by SVM technique were in good accordance with the experimental results, with relative errors smaller than 15% except for a few cases.The SVM technique seems therefore to be relevant and very helpful for complex implicit processes such as chemical reactions, as it is the case of the oxidation of sulfurized rust in oil tanks. Furthermore, such predictive methods can be continuously be improved through additional experiments feedback (larger databases) and can then be of crucial help for monitoring and early warning of hazardous reactions.     

Copper mobilization affected by weather conditions in a stormwater detention system receiving runoff waters from vineyard soils (Champagne, France)

Copper, a priority substance on the EU-Water Framework Directive list, is widely used to protect grapevines against fungus diseases. Many vineyards being located on steep slopes, large amounts of Cu could be discharged in downstream systems by runoff water. The efficiency of stormwater detention basins to retain copper in a vineyard catchment was estimated. Suspended solids, dissolved (Cu_diss) and total Cu (Cu_tot) concentrations were monitored in runoff water, upstream, into and downstream from a detention pond. Mean Cu_tot concentrations in entering water was 53.6 μg/L whereas it never exceeded 2.4 μg/L in seepage. Cu_tot concentrations in basin water (>100 μg/L in 24% of the samples) exceeded LC₅₀ values for several aquatic animals. Copper was principally sequestered by reduced compounds in the basin sediments (2/3 of Cu_tot). Metal sequestration was reversible since sediment resuspension resulted in Cu remobilization. Wind velocity controlled resuspension, explained 70% of Cu_diss variability and could help predicting Cu mobilization.     

Experimental investigation on oxidation of sulfurized rust in oil tank

Oxidation of sulfurized rust in oil tank is complicated, and it is influenced by numerous factors such as water content, air humidity, operating temperature etc. The paper focuses on the oxidation process of sulfurized rust in the wild. Firstly, samples collected from a petrochemical company were put into the sulfurization & oxidation experimental apparatus to gain wet and dry sulfurized rusts. Their chemical compositions and phase were analyzed by Energy Dispersive X-ray Spectrometer (EDS) -scanning electron microscope (SEM) technique. The results showed that both wet and dry sulfurized rusts had S, Fe₂O₃, Fe₃S₄ and FeS₂, whereas FeS only existed in wet sulfurized rust. The two kinds of rusts gave a short length of side, diamond appearance and a large pore size in structure. Then oxidation of wet sulfurized rust was investigated, which included electrochemical reaction stage, electrochemical & chemical reaction coexisting stage and chemical reaction stage. The final oxidation product of wet sulfurized was determined to be Fe₂O₃. On the basis of this study, an indicator for monitoring and early-warning was proposed to prevent plants in vicinity of the accidental vessel or tank from fire and explosion.     

Isolation,identification and desulfurization mechanism of a sulfur-oxidizing bacterium with salt tolerance北大核心CSCD

Micro-organism with efficient desulfurization performance is a key factor in the biological desulfurization technology. This study aimed to seek such a sulfur-oxidizing strain and understand its desulfurization mechanism. Wastewater in a sewage station of natural gas purification plant was used to screen the sulfide-oxidizing strain, and to identify it based on sequence similarity analysis of 16S rDNA and the morphological characteristics. Thiosulfate was used as substrate for investigating the sulfur oxidation performance and salinity tolerance; the OD600, content change of thiosulfate, sulfate, sulfur, pH and total alkalinity in the cultural system were also investigated. The strain DS-B was found to share the highest sequence similarity with Thioalkalivibrio thiocyanoxidans ARh2, therefore determined as Thioalkalivibrio. At the optimum temperature of 35 °C for growth and degradation, the removal efficiency of thiosulfate could reach 98.7% after 7 days. Strain DS-B had strong resistance to thiosulfate, and the optimal concentration of S2O32- was 2 × 104 mg/L. The analysis for sulfur oxides showed that it could oxidize thiosulfate by the pathway of S2O32-→SO42- / S2O32- → S → SO42-. Therefore the strain DS-B is a sulfur-oxidizing bacterium with great application prospect for its strong salt tolerance and conspicuous removal capability for thiosulfate.     

氧化沟活性污泥膨胀的原因和控制

荆门石化污水处理场采用氧化沟处理工艺。针对在处理炼油污水过程中发生的污泥膨胀现象，根据运行数据，对活性污泥膨胀的原因进行分析和讨论，并提出建议。     

国内制革废水处理技术发展现状及展望

介绍了国内制革综合废水处理技术的发展现状,包括全物化技术和生物处理技术;对制革综合废水处理技术的发展趋势进行展望,氧化沟和SBR法是适合我国制革废水特点的处理工艺。     

海水中总氮的测定方法比较研究

通过标准曲线、检出限和测定范围、方法精密度、方法准确度、实际海水样品测定结果、加标回收率、分析效率和物料消耗这几方面比较了过硫酸钾氧化法、流动注射分析法和高温氧化-化学发光检测法这3种测定海水中总氮(TN)方法的优缺点。结果表明,流动注射分析法和高温氧化-化学发光检测法的测定范围更宽,精密度、准确度更好,3种样品的加标回收率达到96.2%~101%;高温氧化-化学发光检测法分析效率高、物料消耗少、节能环保,适用于一般海水样品的批量分析,且由于测定范围大,该法也适用于TN浓度较高的海水样品的批量分析,流动注射分析法因其较低的检出限更适用于TN浓度较低的海水样品的批量分析。     

Decomposition and oxidation of sodium 3,5,6-trichloropyridin-2-ol in sub- and supercritical water

Sodium 3,5,6-trichloropyridin-2-ol (STCP) is a necessary precursor compound for the production of chlorpyrifos and triclopyr, which are extensively used as pesticide and herbicide, respectively. In the process of STCP production, however, large amount of wastewater containing STCP is discharged, which causes increasingly environmental concerns. Therefore, it is of great significance to develop a rapid and effective method for the disposal of containing STCP contaminants. In this work, the thermal decomposition of STCP in sub- and supercritical water was investigated using a continuous tubular reactor. While STCP was stable below 280 °C, it could be effectively decomposed at elevated temperature. FT-IR spectra of the decomposition products indicated that the pyridine ring structure in the STCP molecule was stable even at temperatures up to 400 °C. The decomposition reaction was mainly caused by the substitution of Cl groups in the STCP molecule with OH groups, resulting in polyhydroxylated pyridines as the major decomposition product. Moreover, high pressure favored the substitution reaction. To completely decompose STCP into non-toxic or low toxic compounds, supercritical water oxidation (SCWO) was employed to evaluate the oxidation of STCP using H₂O₂ as an oxidant. It was found that STCP could be completely oxidized to H₂O, CO₂ and corresponding inorganic ammonium salts with an oxidation rate of 99%.