Green Screen or Smokescreen? Hollywood's Messages about Nature and the Environment

This paper examines ideologies about nature and the environment in popular, animated Hollywood films—including The Lorax, Wall-E, and Ice Age 2—through a symptomatic reading. The primary goal of the analysis is to elucidate key omissions in these texts through an assessment of the problematic—defined in this research as an a-priori answer to perceived audience concerns regarding the role of consumerism and corporate culture in environmental problems. Silences in the films revolve around: how environmental problems are defined; what the consequences are; who the responsible parties are; and what potential solutions exist to mitigate them. The significance of the research is underscored by the formation of an increasingly intimate relationship between children, consumer culture, and commercial media in the USA, as well as the increasingly dire information emerging about global environmental issues. This analysis reveals the dual, often conflicting, messages that commercial film provides for its young audiences about pivotal environmental problems and their potential resolution.     

Removal of arsenic from wastewater using iron compound: Comparing two different types of adsorbents in the context of LCA

A study was carried out in order to compare the environmental performance of two different types of adsorbents in removing arsenic (As) from wastewater. A FeCl₃-based adsorbent and a poly-Fe-based adsorbent were first synthesized and their abilities in adsorbing As from wastewater were investigated in terms of the adsorption density and the rate of adsorption. Here, it should be noted that the main material being used in the synthesis of the poly-Fe-based adsorbent was a waste product, known as polyferric sulfate or poly-Fe in short, which exits the manufacturing process of titanium dioxide.Both adsorbents were then compared in the context of life-cycle assessment (LCA). In other words, the experimental results (i.e. the value of the adsorption density and the rate of adsorption) were input into the LCA model in order to assess the environmental performance of each adsorbent in removing arsenic. An estimate for the environmental burden of each option was finally calculated as the sum of the depletion of abiotic resources (ADP), the global warming potential (GWP), the acidification potential (AP), the photo-oxidant formation potential (POCP), the eutrophication potential (EP), and the human toxicity potential (HTP). The main finding of this study was that the adsorption of arsenic by using the poly-Fe-based adsorbent is more attractive treatment option in the environmental protection point of view than the adsorption by using the FeCl₃-based adsorbent, which generates a relatively larger environmental burden.     

新型悬浮填料澄清池中填料对澄清作用的影响初探

为考察可取代传统二沉池的新型悬浮填料澄清池技术的原理及关键参数,小试试验研究了填料对新型悬浮填料澄清池固液分离过程中附着污泥形成及其絮凝性能的影响,并对填料在澄清中的作用机理进行了探讨。结果表明,当泥水界面上升至填料区后,可以形成较悬浮污泥更加致密稳定的附着污泥区,并形成孔道流,强化了对混合液中污泥颗粒的絮凝效果;填料区可以捕捉去除从悬浮污泥区中“逃逸”的微小污泥絮体,并降低出水浊度,有效地保证了出水水质的稳定性。填料的存在发挥了强大的整流作用,降低了雷诺数Re,提高了弗汝德数Fr,从而改善了污泥絮凝的水力条件,提高了澄清能力。     

低压稳流过滤器的研制及在油田污水处理中的应用

为了解决大庆油田现有核桃壳、石英砂过滤器反冲洗憋压、跑料和滤料再生困难等问题,在对原有过滤装置分析的基础上,根据反冲洗特性,对过滤器进行了改造,开发出低压稳流核桃壳过滤器和低压稳流石英砂过滤器。经现场测试,核桃壳过滤器反冲洗压力由原来的0.15～0.5 MPa降低到0.03～0.08 MPa,石英砂过滤器反冲洗压力由原来的0.27～0.46 MPa降低到0.17～0.20 MPa,且均能实现罐群水反冲洗。改造后核桃壳过滤器出水油平均含量13.4 mg/L,平均去除率为78.1%;出水悬浮物平均含量20.5 mg/L,平均去除率为55%。改造后石英砂过滤器出水油平均含量5 mg/L以下,平均去除率达到75%以上;出水悬浮物平均含量为9.8 mg/L,去除率达到80%以上。为了进一步提高过滤效果,在二级滤前投加絮凝剂形成微絮凝过滤工艺,出水悬浮物可达到3 mg/L,通过两级过滤达到特低渗透地层回注水标准。     

复合沸石滤床修复北方景观水体的实验研究

以天然矿物质沸石、细砂及煤渣取代传统滤料构建复合基质生态床,表面种植景观植物,采用下向流-上向流运行方式修复北方景观水体。分别进行静态实验及不同循环速率下的动态实验,考察对水体污染物去除过程。结果表明,2种运行方式下对水体NH⁺₄-N去除率都在85%以上,其中以1 h为循环周期的运行方式去除率达97%,较静态提高12.8%;TN去除率最高为84%;TP去除不稳定,过程缓慢。煤渣层对NH⁺₄-N的去除效果差,硝化作用不彻底与反硝化作用的加强使下层出水NH⁺₄-N 、NO^-₂-N及NO^-₃-N浓度均高于上层。提高循环速率有利于对氮的去除。     

静电激发型袋除尘器的机理及应用前景

静电激发型袋除尘器有别于常规的电袋结合除尘器,其是将电除尘器的预荷电原理作用于烟气后,利用袋除尘器的滤袋做收尘极板来收集粉尘。本文通过分析Max-9^TMESFF的结构介绍了其除尘机理,并分析了它的应用前景。     

废钢铁切割加工烟尘的治理

介绍了氧-乙炔火焰切割加工废钢铁产生的烟尘治理系统的设计和系统设备选型,重点介绍了烟尘捕集罩的设计和除尘器、电磁脉冲阀、风机的选型和PLC自动控制以及系统实际运行效果,为废钢铁加工企业治理污染提供一套简单、经济、实用的除尘系统作参考.     

1.5t、3t电弧炉烟尘治理

针对1.5 t、3 t电弧炉在烟尘治理时场地狭小的特点,采用可折叠式收尘罩与低压长袋脉冲袋式除尘器技术进行治理.测试表明,系统运行可靠,烟尘治理效果良好,工厂车间环境取得显著改善,岗位粉尘浓度、烟尘排放浓度均达到国家规定的标准.     

电袋复合除尘器的应用研究

针对我国燃煤电厂的除尘现状,指出电袋复合除尘器的技术经济优势.电袋复合除尘器在新建及改扩建电厂的成功应用取得了良好的经济、环境效益,并有广阔的发展前景.其研究重点是静电除尘单元和布袋除尘单元之间的结合.     

PPS滤料在SO2气体作用下的耐腐蚀性研究

采用气体实验法对PPS滤料在SO2气体中腐蚀失效的过程进行了研究.通过实验前后PPS滤料的机械特性、微观特征和化学结构的分析,认为PPS对SO2气体具有良好的耐腐蚀性.但是,随着SO2气体温度的升高,时间的延长及气体体积比提高,PPS 针刺毡滤料的性能有所下降,尤其是高温能加快腐蚀效果.为了延长使用寿命,应使其工作参数在限定的范围内: 在SO2体积比高于700 mL/m3时,应对烟气进行预处理使其体积比低于实验值,或者使烟气的温度控制在170 ℃以下; 如果烟气中SO2体积比超过预定值,烟气温度又高于170 ℃,则PPS针刺毡滤料连续使用时间应不超过96 h.