聚氯乙烯生产中副产高沸物的综合利用

介绍了以ＰＶＣ生产中副产的高沸物精制后作溶剂,降解后的废聚苯乙烯泡沫塑料的作主料,制造塑化防腐漆的工艺流程,产品性能及经济效益。     

废环氧树脂/PVC复合材料的性能

将废环氧树脂与聚氯乙烯(PVC)共混,采用模压工艺制备复合材料。通过正交实验,讨论废环氧树脂添加量、硅烷偶联剂KH-550用量、模压时间3个因素对复合材料力学性能的影响大小,得到其优化条件。在正交实验所得优化条件基础之上,研究单因素对复合材料的影响,最终确定实验的最优方案。结果表明:当模压时间10 min,废环氧树脂添加量70%,硅烷偶联剂用量2份时,复合材料的力学性能达到最优,冲击强度为10.49 kJ/m2,拉伸强度为62.24 MPa。     

聚合硫酸铁/高锰酸钾/二氧化氯组合工艺用于聚氯乙烯废水回收的工程化研究

采用聚合硫酸铁复配高锰酸钾混凝结合二氧化氯氧化的组合工艺成功解决了某厂聚氯乙烯生产废水回收工艺CODMn不达标问题。工程运行结果表明,当原水CODMn=30～48 mg/L,浊度=25～46 NTU时,在CFe=16.8 mg/L,CKMnO4=45 mg/L,CClO2=20 mg/L的条件下,出水CODMn<10 mg/L,浊度<0.5 NTU,达到工业循环补给水的水质要求。     

固定床PVC燃烧脱氯的机理和试验

研究垃圾组分PVC在焚烧过程中HCl的排放和脱除特性的实验在准等温、电加热的水平石英管反应器中进行.随着床温从700℃升高到900℃,HCl的转化率从82.5%平缓增加到88.3%,而过量空气系数的增加促使部分HCl转化为C1₂(1.9%～4.5%)的形式存在.钙基吸收剂CaCO₃,Ca(OH)₂,Ca(CH₃COO)₂对HCl的脱除效率高达68%～79%,而镁基吸收剂的脱氯效率却低于3%.小的吸收剂粒径、高的Ca/Cl比会促进脱氯效率的提高;烟气中CO₂和H₂O对脱氯效率的影响与它们在反应平衡中所起作用有关.高温下燃烧固氯机理反应的平衡常数的计算不仅诠释了实验结果,而且提供了脱氯吸收剂选择的依据.     

The relative contribution of wood and poly(vinyl chloride) to emissions of PCDD and PCDF from house fires

Emissions of PCDD/F from poly(vinyl chloride) (PVC) burned in house fires has been estimated at <1 g I-TEQ/yr in the US. In the current literature-based study, amounts of wood (21,000 kg) and PVC (180 kg) in a new house of standard construction are calculated and previously published emission factors for wood (0.01–173 μg/t) and PVC (3–6554 μg/t) are reported. Test conditions under which emission factors are generated differ and may not be directly comparable. Typically, PVC is tested at small-scale under relatively poor combustion conditions and wood is tested at large-scale under good combustion conditions. Thus, overall emission from combustion of these two materials of construction in house fires on an as-used basis is estimated to be similar (on the order of 1 g/yr) and a small contributor to the PCDD/F sources inventory. No speculation is made with respect to contents, roofing or other materials of construction.     

悬浮法聚氯乙烯化工离心母液的生化处理中试

采用4级内循环式好氧生物膜反应器串联工艺对悬浮法聚氯乙烯(PVC)离心母液废水进行中试试验,研究了不同停留时间下系统对有机物和浊度的处理效果以及系统的抗冲击能力;观察了生物膜的生长和发展规律;对影响系统稳定运行的主要因素(悬浮物、摇蚊幼虫和营养物)进行了分析,并提出了相应的控制措施.试验结果表明:该工艺启动迅速,在HRT为14h时,废水COD总去除率可达75%以上,出水COD浓度低于50mg/L ,完全可以达到排放标准,也可经深度处理回用于生产.     

松木屑/烟煤粉/PVC粉混合制备成型燃料

以松木屑/PVC粉/烟煤粉为原料,在150℃下采用不同压力和不同原料配比混合制备成型燃料,研究不同原料配比和压力对成型后颗粒的初始密度、松弛密度和耐摔强度等物理品质的影响.结果表明,2种或3种原料混合制备成型燃料的稳定性和耐摔强度均高于单一原料.虽然成型燃料的成型密度稳定性和耐摔强度随着压力的增加而升高,但是当压力达到15MPa后,耐摔强度的增加趋势并不是很明显.考虑到热压机能耗随着压力增加而增加的因素,15MPa可以确定为最佳成型压力.15MPa下,成型燃料在混合比例（松木屑：烟煤粉：PVC粉）为1：1：3时密度稳定在1.408g/cm³;耐摔强度在1：1：2时达到最大值99.99%.     

大型PVC生产企业清洁生产分析研究——以新疆中泰化学华泰重化工有限责任公司为例

利用工艺设备先进、自动化程度高、管理良好、生产规模在同行业中位居全国前列的新疆中泰化学华泰重化工有限责任公司聚氯乙烯树脂(PVC)生产线的清洁生产审核及后评估,通过对其生产工艺、物耗能耗、浪费环节等多方面的分析,挖掘其清洁生产潜力,并通过Vmbeao软件分析其清洁生活水平,为同类企业的清洁生产审核提供借鉴实例,并总结出具有推广价值的清洁生产技术.     

Safer alternatives assessment: the Massachusetts process as a model for state governments

In 2006 the Massachusetts Toxics Use Reduction Institute conducted a study to determine if states could identify safer alternatives to five chemicals of concern. The chemicals investigated included di (2-ethylhexyl) phthalate (DEHP), formaldehyde, hexavalent chromium, lead and perchloroethylene. First, the Institute developed a methodology for assessing alternatives to these five chemicals that allowed it to quickly determine priority uses and alternatives to assess and to research the pertinent decision criteria, which included performance, technical, financial environmental and human health parameters. The methodology included important feedback from stakeholders in the state, which helped to focus and enhance the value of the work. Second, the Institute implemented the methodology over a ten month period. Based on the activities conducted by the Institute, safer alternatives were identified for each of the priority uses associated with the five chemicals studied. This report summarizes the methodology employed and provides examples of the results for one of the five chemicals, namely DEHP. The experience of the Institute and the information contained in this report indicates that alternatives assessment was a useful approach to organizing and evaluating information about chemicals and alternatives.     

过载、破损及老化风险场景的单芯PVC电缆温升研究*

为研究多风险耦合场景下单芯PVC电缆温升问题,基于传热学理论建立电缆温升方程及热平衡函数,设计过载、破损和老化风险场景的PVC电缆温升试验,测量并分析电缆温升趋势,提出电缆温升数据的稳健拟合方法,并拟合过载、破损-过载、老化-过载及破损-老化-过载组合风险耦合场景下的电缆平衡温升方程。研究结果表明:过载是电缆温升的主要风险因素,破损和老化风险可通过改变传热条件进一步影响电缆温升,量化了耦合风险下单芯PVC电缆的温升规律。研究结果可为电缆内因火灾预警和防控提供参考。