Assessing the recovery potential of alpine moss-sedge heath: reciprocal transplants along a nitrogen deposition gradient

The potential of alpine moss-sedge heath to recover from elevated nitrogen (N) deposition was assessed by transplanting Racomitrium lanuginosum shoots and vegetation turfs between 10 elevated N deposition sites (8.2-32.9 kg ha⁻¹ yr⁻¹) and a low N deposition site, Ben Wyvis (7.2 kg ha⁻¹ yr⁻¹). After two years, tissue N of Racomitrium shoots transplanted from higher N sites to Ben Wyvis only partially equilibrated to reduced N deposition whereas reciprocal transplants almost matched the tissue N of indigenous moss. Unexpectedly, moss shoot growth was stimulated at higher N deposition sites. However, moss depth and biomass increased in turfs transplanted to Ben Wyvis, apparently due to slower shoot turnover (suggested to result partly from decreased tissue C:N slowing decomposition), whilst abundance of vascular species declined. Racomitrium heath has the potential to recover from the impacts of N deposition; however, this is constrained by the persistence of enhanced moss tissue N contents.     

Printed wiring boards for mobile phones: characterization and recycling of copper

The popularization of mobile phones, combined with a technological evolution, means a large number of scrap and obsolete equipment are discarded every year, thereby causing economic losses and environmental pollution. In the present study, the printed wiring boards scrap of mobile phones were characterized in order to recycle some of the device components, using techniques of mechanical processing, hydrometallurgy and electrometallurgy. The use of the techniques of mechanical processing (milling, particle size classification, magnetic and electrostatic separation) was an efficient alternative to obtain a concentrated fraction (mainly iron in the magnetic fraction and copper in the conductive fraction) and another fraction containing polymers and ceramics. At the end of mechanical processing, a concentrated fraction of metals could be obtained with an average concentration of 60% copper. This concentrated fraction in metals was dissolved in aqua regia and sent to electrowinning to recover 92% of the dissolved copper. The obtained cathodes have a copper content above 95%, which demonstrates the technical feasibility of recovery of copper using the techniques of mechanical processing, hydrometallurgy and electrometallurgy.     

Disturbance regimes,resilience, and recovery of animal communities and habitats in lotic ecosystems

Disturbance regime is a critical organizing feature of stream communities and ecosystems. The position of a given reach in the river basin and the sediment type within that reach are two key determinants of the frequency and intensity of flow-induced disturbances. We distinguish between predictable and unpredictable events and suggest that predictable discharge events are not disturbances. We relate the dynamics of recovery from disturbance (i.e., resilience) to disturbance regime (i.e., the disturbance history of the site). The most frequently and predictably disturbed sites can be expected to demonstrate the highest resilience. Spatial scale is an important dimension of community structure, dynamics, and recovery from disturbance. We compare the effects on small patches (⩽1 m²) to the effects of large reaches at the river basin level. At small scales, sediment movements and scour are major factors affecting the distribution of populations of aquatic insects or algae. At larger scales, we must deal with channel formation, bank erosion, and interactions with the riparian zone that will affect all taxa and processes. Our understanding of stream ecosystem recovery rests on our grasp of the historical, spatial, and temporal background of contemporary disturbance events.     

Recovery of lotic macroinvertebrate communities from disturbance

Ecosystem disturbances produce changes in macrobenthic community structure (abundances, biomass, and production) that persist for a few weeks to many decades. Examples of disturbances with extremely long-term effects on benthic communities include contamination by persistent toxic agents, physical changes in habitats, and altered energy inputs. Stream size, retention, and local geomorphology may ameliorate the influence of disturbances on invertebrates. Disturbances can alter food webs and may select for favorable genotypes (e.g., insecticidal resistance). Introductions of pesticides into lotic ecosystems, which do not result in major physical changes within habitats, illustrate several factors that influence invertebrate recovery time from disturbance. These include: (1) magnitude of original contamination, toxicity, and extent of continued use; (2) spatial scale of the disturbance; (3) persistence of the pesticide; (4) timing of the contamination in relation to the life history stages of the organisms; (5) vagility of populations influenced by pesticides; and (6) position within the drainage network. The ability of macroinvertebrates to recolonize denuded stream habitats may vary greatly depending on regional life histories, dispersal abilities, and position within the stream network (e.g., headwaters vs larger rivers). Although downstream drift is the most frequently cited mechanism of invertebrate recolonization following disturbance in middle- and larger-order streams, evidence is presented that shows aerial recolonization to be potentially important in headwater streams. There is an apparent stochastic element operating for aerial recolonization, depending on the timing of disturbance and flight periods of various taxa. Available evidence indicates that recolonization of invertebrate taxa without an aerial adult stage requires longer periods of time than for those that possess winged, terrestrial adult stages (i.e., most insects). Innovative, manipulative experiments are needed in order to address recolonization mechanisms of animals inhabiting streams that differ in size, latitude, disturbance frequency and magnitude, as well as the potential influence of early colonists on successional sequences of species following disturbance.     

Recovery of temperate-stream fish communities from disturbance: A review of case studies and synthesis of theory

To evaluate the relative effect of autecologic factors, site-specific factors, disturbance characteristics, and community structure on the recovery of temperate-stream fish communities, we reviewed case histories for 49 sites and recorded data on 411 recovery end points. Most data were derived from studies of low-gradient third- or fourth-order temperate streams located in forested or agricultural watersheds. Species composition, species richness, and total density all recovered within one year for over 70% of systems studied. Lotic fish communities were not resilient to press disturbances (e.g., mining, logging, channelization) in the absence of mitigation efforts (recovery time >5 to >52 yr) and in these cases recovery was limited by habitat quality. Following pulse disturbances, autecological factors, site-specific factors, and disturbance-specific factors all affected rates of recovery. Centrarchids and minnows were most resilient to disturbance, while salmonid populations were least resilient of all families considered. Species within rock-substrate/nest-spawning guilds required significantly longer time periods to either recolonize or reestablish predisturbance population densities than did species within other reproductive guilds. Recovery was enhanced by the presence of refugia but was delayed by barriers to migration, especially when source populations for recolonization were relatively distant. Median population recovery times for systems in which disturbances occurred during or immediately prior to spawning were significantly less than median recovery times for systems in which disturbances occurred immediately after spawning. There was little evidence for the influence of biotic interactions on recovery rates.     

Present status of the recycling of waste electrical and electronic equipment in Korea

In Korea due to rapid economical growth followed by urbanisation, breakage of large traditional families into small nuclear families, continuous changes in equipment features and capabilities causes tremendous increase in sale of new electrical and electronic equipment (EEE) and decrease in sale of used EEE. Subsequently, the ever-increasing quantity of waste electrical and electronic equipment (WEEE) has become a serious social problem and threat to the environment. Therefore, the gradual increase in the generation of WEEE intensifies the interest for recycling to conserve the resources and protect the environment. In view of the above, a review has been made related to the present status of the recycling of waste electrical and electronic equipment in Korea. This paper describes the present status of generation and recycling of waste electrical and electronic equipment, namely TVs, refrigerators, washing machines, air conditioners, personal computers and mobile phones in Korea. The commercial processes and the status of developing new technologies for the recycling of metallic values from waste printed circuit boards (PCBs) is also described briefly. Since 1998, three recycling centers are in full operation to recycle WEEE such as refrigerators, washing machines and air conditioners, having the total capacity of 880,000 units/year. All waste TVs are recently recycled on commission basis by several private recycling plants. The recycling of waste personal computers and mobile phones is insignificant in comparison with the amount of estimated obsolete those. Korea has adopted and enforced the extended producer responsibility (EPR) system. Korea is making consistent efforts to improve the recycling rate to the standards indicated in the EU directives for WEEE. Especially environmentally friendly and energy-saving technologies are being developed to recycle metal values from PCBs of WEEE.     

Phosphorus recovery from biogas fermentation liquid by Ca–Mg loaded biochar

Shortage in phosphorus (P) resources and P wastewater pollution is considered as a serious problem worldwide. The application of modified biochar for P recovery from wastewater and reuse of recovered P as agricultural fertilizer is a preferred process. This work aims to develop a calcium and magnesium loaded biochar (Ca–Mg/biochar) application for P recovery from biogas fermentation liquid. The physico-chemical characterization, adsorption efficiency, adsorption selectivity, and postsorption availability of Ca-Mg/biochar were investigated. The synthesized Ca–Mg/biochar was rich in organic functional groups and in CaO and MgO nanoparticles. With the increase in synthesis temperature, the yield decreased, C content increased, H content decreased, N content remained the same basically, and BET surface area increased. The P adsorption of Ca–Mg/biochar could be accelerated by nano-CaO and nano-MgO particles and reached equilibrium after 360 min. The process was endothermic, spontaneous, and showed an increase in the disorder of the solid–liquid interface. Moreover, it could be fitted by the Freundlich model. The maximum P adsorption amounts were 294.22, 315.33, and 326.63 mg/g. The P adsorption selectivity of Ca–Mg/biochar could not be significantly influenced by the typical pH level of biogas fermentation liquid. The nano-CaO and nano-MgO particles of Ca–Mg/biochar could reduce the negative interaction effects of coexisting ions. The P releasing amounts of postsorption Ca–Mg/biochar were in the order of Ca–Mg/B600 > Ca–Mg/B450 > Ca–Mg/B300. Results revealed that postsorption Ca–Mg/biochar can continually release P and is more suitable for an acid environment.     

废旧镍-镉电池中镍镉的回收方法

废旧镍－镉电池中镍和镉的回收主要有火法冶金和湿法冶金两种处理方法，本文对目前研究状况进行了综述。     

ICP-AES法测定大气降水中微量金属元素

利用电感耦合等离子体原子发射光谱法(ICP-AES)对降水中的Al、Ba、Cr、Fe、Ni、Ti和Zn 7种微量金属元素进行了同时测定。通过信噪比选取了这7种元素的最佳分析谱线和最优仪器测试条件。在此条件下,7种元素的线性相关系数r均大于0.999,6次测试样品的相对标准偏差均小于5%,Al、Ba、Cr、Fe、Ni、Ti和Zn的检出限分别为0.79、0.34、0.33、0.25、0.54、0.08和0.85μg/L。空白加标回收率为93.24%~100.88%,该方法操作简单、准确、快速,适用于大气降水中多种微量金属元素的同时测定。     

从COD测定废液中回收银

研究从COD测定的废液中回收银的工艺.在废液中分离出氯化银,经洗涤后加锌置换,还原为银.该工艺简便易行,原材料普通易得.适用于实验室及工业生产的应用.回收银的纯度可达99％以上.