Retrieving surface deformation by PSInSAR™ technology: A powerful tool in reservoir monitoring

Reservoir monitoring improves our understanding of reservoir behaviour and helps achieve more effective reservoir management and prediction of future performance with obvious economic benefits. It relies on an integrated approach involving both surveillance (well or surface based; seismic, electrical, leakage, flow and deformation measurements, etc.) and modelling. Surface deformation monitoring can provide valuable constraints on the dynamic behaviour of a reservoir enabling the evaluation of volumetric changes in the reservoir through time. Levelling campaigns, tiltmeters, GPS permanent stations and Permanent Scatterer SAR Interferometry (PSInSAR™) are the techniques most widely used to determine surface displacements. Whatever the surveying technique, the detection of millimetre-level surface deformation is required to monitor small surface displacement rates that could impact risk evaluation and land use planning. Depending on depth and reservoir/overburden rheology, volumetric changes in reservoirs due to fluid extraction and injection can induce either subsidence or uplift that could trigger fault reactivation and threaten well integrity; deformation may also be detectable at the surface. Mapping surface effects accurately requires hundreds of observation points per km² which cannot be delivered by traditional monitoring methods without unacceptably large expenditure. PSInSAR™ is one of the most promising and cost-effective techniques capable of providing high precision and high areal density displacement measurements over long periods of time. Moreover, the availability of PS data for both ascending and descending orbits enables the estimation of both vertical and E–W horizontal displacement fields. Two case histories will be presented to illustrate the advantages of PSInSAR™ technology for the detection of surface deformation induced by reservoir exploitation and monitoring of its evolution though time.     

电渗析法再生CO2碱吸收液的初步探讨

以Na2CO3和NaHCO3的混合液作为用碱液吸收CO2气体的模拟液,用两室单阴膜电渗析装置对其在小于5V的低电压下进行脱碳处理,并且得出电渗析的方法可以增加回收液中Na2CO3和NaHCO3的浓度比,减少碳的总浓度,起到了对CO2的碱吸收液再生利用的作用。     

综合利用石墨化废旧辅料的新方法

炭素石墨制品生产过程中产生的石墨化废旧辅料,在炭素行业是最有开发潜力的固体废物。通过初加工可实现回收利用,经研制开发新产品可实现综合利用。该综合利用方法表明,在实现综合利用中可获得大的经济效益和可观的社会效益。      

Stress and recovery assessment during simulated microgravity: Effects of exercise during a long-term head-down tilt bed rest in women

The aim of this study was to determine the effects of a 60-day head-down tilt long-term bed rest (HDT) on stress and recovery in sixteen healthy female volunteers. Participants were randomly assigned to either an exercise group (Exe) that followed a training program combining resistive and aerobic exercises, or to a no-exercise control group (Ctl). Psychological states were assessed using the Rest-Q, a validated questionnaire based on stress–recovery responses. A longitudinal analysis revealed significant changes in the general and specific-stress scales for all participants throughout the experiment with a critical stage from supine to standing posture leading to a significant decrease in physical recovery. During HDT, Exe reported higher scores on stress subscales, as well as lower recovery scores compared to the Ctl. During the post-HDT ambulatory recovery period, the exercisers still reported higher scores than the non-exercisers on the Lack of energy stress-related scale, along with lower scores in general well-being and personal accomplishment. The present findings show that simulated weightlessness such as HDT may induce psychological stress and lead to subsequent alterations in perceived recovery. Exercise did not reduce HDT impaired effects on stress and recovery states. Several suggestions, including psychological preparation, are proposed to support the beneficial effects of exercise on psychological factors.     

Recovery assessment of a refined-oil impacted and fire ravaged mangrove ecosystem

An assessment of the diversity and abundance of macrobenthic community in a refined-oil (petrol) impacted and fire-ravaged mangrove ecosystem within the vicinity of a marine receipt terminal facility (Atlas Cove) serving as a distribution and pump station for refined products was carried out. The mangrove ecosystem was subjected to massive petrol spillage from a leaking pipeline and eventual fire outbreak. Following rehabilitation activities, a recovery assessment of the impacted ecosystem was carried out. The field surveys revealed that the petrol leakage and fire outbreak resulted in a near complete destruction of the mangrove ecosystem around the Atlas Cove depot, with macrobenthic species diversity index ranging between 0−0.4, compared to 0.78−0.87 in the control stations. The dominant early arrivals or colonizers of the impacted stations areas were Clibanarius africanus and Callinectes amnicola. Early signs of recovery of the impacted area were observed within about two and a half (2 1/2) to three (3) months, based on diversity and abundance indices respectively. The period of early signs of recovery also coincide with an observed reduction in the total hydrocarbon content (THC) levels in the sediment collected from the impacted stations by about nine folds from 3.67 mg/kg to 0.42 mg/kg within 3 months. Despite the apparent signs of recovery, the need for long-term monitoring of the impacted stations was discussed.     

Amounts of non-fibrous components in recovered paper

Paper and board recycling is now a central issue in papermaking. Understanding of material flows, as a part of the total production chain, as well as, fibrous and non-fibrous component flows needs further clarification. These flows are studied at a European level, with special focus on Germany and Sweden. Non-fibrous components are discussed in terms of a material which hampers the processing of paper and board. Resource-efficiency improvements, in conjunction with economic benefits, are sought and recycling has been able to fulfil both of these. The main drivers to maximize the use of recovered paper in paper and board manufacturing, have been improved over the last decades. These drivers are cost, environmental image and good technical properties to be used as raw material.The increased recycling rate has reduced the quality of the collected paper, produced recycled paper, and replaced virgin pulp. Also, recycling as a process, like deinking, produces large amounts of waste material that has challenges to find proper utilization. These problem areas are addressed in this paper, too.One focus area in the analysis of statistical information is an estimation of the share of non-fibrous components and fibre volumes of paper in Europe (EU) for the year 2010.     

Use of opportunistic sightings and expert knowledge to predict and compare Whooping Crane stopover habitat

Predicting a species’ distribution can be helpful for evaluating management actions such as critical habitat designations under the U.S. Endangered Species Act or habitat acquisition and rehabilitation. Whooping Cranes (Grus americana) are one of the rarest birds in the world, and conservation and management of habitat is required to ensure their survival. We developed a species distribution model (SDM) that could be used to inform habitat management actions for Whooping Cranes within the state of Nebraska (U.S.A.). We collated 407 opportunistic Whooping Crane group records reported from 1988 to 2012. Most records of Whooping Cranes were contributed by the public; therefore, developing an SDM that accounted for sampling bias was essential because observations at some migration stopover locations may be under represented. An auxiliary data set, required to explore the influence of sampling bias, was derived with expert elicitation. Using our SDM, we compared an intensively managed area in the Central Platte River Valley with the Niobrara National Scenic River in northern Nebraska. Our results suggest, during the peak of migration, Whooping Crane abundance was 262.2 (90% CI 40.2?3144.2) times higher per unit area in the Central Platte River Valley relative to the Niobrara National Scenic River. Although we compared only 2 areas, our model could be used to evaluate any region within the state of Nebraska. Furthermore, our expert‐informed modeling approach could be applied to opportunistic presence‐only data when sampling bias is a concern and expert knowledge is available.     

Quantification of the resource recovery potential of municipal solid waste incineration bottom ashes

Municipal solid waste incineration (MSWI) plays an important role in many European waste management systems. However, increasing focus on resource criticality has raised concern regarding the possible loss of critical resources through MSWI. The primary form of solid output from waste incinerators is bottom ashes (BAs), which also have important resource potential. Based on a full-scale Danish recovery facility, detailed material and substance flow analyses (MFA and SFA) were carried out, in order to characterise the resource recovery potential of Danish BA: (i) based on historical and experimental data, all individual flows (representing different grain size fractions) within the recovery facility were quantified, (ii) the resource potential of ferrous (Fe) and non-ferrous (NFe) metals as well as rare earth elements (REE) was determined, (iii) recovery efficiencies were quantified for scrap metal and (iv) resource potential variability and recovery efficiencies were quantified based on a range of ashes from different incinerators. Recovery efficiencies for Fe and NFe reached 85% and 61%, respectively, with the resource potential of metals in BA before recovery being 7.2%ww for Fe and 2.2%ww for NFe. Considerable non-recovered resource potential was found in fine fraction (below 2 mm), where approximately 12% of the total NFe potential in the BA were left. REEs were detected in the ashes, but the levels were two or three orders of magnitude lower than typical ore concentrations. The lack of REE enrichment in BAs indicated that the post-incineration recovery of these resources may not be a likely option with current technology. Based on these results, it is recommended to focus on limiting REE-containing products in waste for incineration and improving pre-incineration sorting initiatives for these elements.     

空气和煤气吹脱法处理高氨氮废水的对比研究

研究了在实验室使用空气吹脱法去除高浓度氨氮废水的条件,通过正交实验得出其影响因素大小顺序为:废水pH>气液比r>废水温度tw>表面活性剂浓度c,最佳吹脱条件为pH=11.0,r=550,c=10mg/L,tw=75℃,最高氨氮去除效率达到71.4%。在某焦化厂以终冷塔后焦炉煤气为解吸介质,现场试验影响因素大小顺序为:o废水pH>废水温度tw>气液比r>煤气温度tg>表面活性剂浓度c,最佳吹脱条件为pH=11.5,tw=90℃,r=650,tg=55℃,c=20mg/L。为煤气吹脱解吸回收氨工艺的应用提出了建议。     

Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements

This article analyses the current and future end-of-life management of electronic displays (flat screen televisions and monitors), and identifies and discusses possible ecodesign recommendations to improve it. Based on an investigation of the treatment of displays in two typical European recycling plants, key aspects and criticalities of the recycling methods (sorting, dismantling and pre-processing) are identified. Disaggregated data concerning on-site measurements of the time needed to manually dismantle different displays are presented. The article also discusses the potential evolution of end-of-life scenarios for electronic displays and suggests possible recommendations for recyclers, producers and policy-makers to promote resource efficiency in the recycling of such waste products. Data on time for dismantling the displays can be used to build measurers for voluntary and mandatory policies, to stimulate design innovations for products improvement, and to assess possible alternative treatments of the waste during the pre-processing at the recycling plants. Some quantitative product measures (based on the time thresholds for dismantling some key components) are also discussed, including an assessment of their economic viability. These measures can potentially be enforced through mandatory and voluntary European product policies, and could also be extended to other product groups.