AA3流动注射仪快速测定地表水中的总氰化物

在反复实验的基础上建立了运用Bran+Luebbe AutoAnalyzer 3流动注射分析仪快速测定地表水中总氰化物的分析方法。结果表明,该方法与传统的分光光度法相比,具有自动进样、分析速度快、测定成本低等优点。与经典的分析方法相对照,结果无显著性差异,能够满足大批量地表水监测的要求。在测试系统中引入了恒温槽,进一步提高了测试的精密度和准确度。     

Does Including Soil Moisture Observations Improve Operational Streamflow Forecasts in Snow‐Dominated Watersheds?

Changing climate and growing water demand are increasing the need for robust streamflow forecasts. Historically, operational streamflow forecasts made by the Natural Resources Conservation Service have relied on precipitation and snow water equivalent observations from Snow Telemetry (SNOTEL) sites. We investigate whether also including SNOTEL soil moisture observations improve April‐July streamflow volume forecast accuracy at 0, 1, 2, and 3‐month lead times at 12 watersheds in Utah and California. We found statistically significant improvement in 0 and 3‐month lead time accuracy in 8 of 12 watersheds and 10 of 12 watersheds for 1 and 2‐month lead times. Surprisingly, these improvements were insensitive to soil moisture metrics derived from soil physical properties. Forecasts were made with volumetric water content (VWC) averaged from October 1 to the forecast date. By including VWC at the 0‐month lead time the forecasts explained 7.3% more variability and increased the streamflow volume accuracy by 8.4% on average compared to standard forecasts that already explained an average 77% of the variability. At 1 to 3‐month lead times, the inclusion of soil moisture explained 12.3‐26.3% more variability than the standard forecast on average. Our findings indicate including soil moisture observations increased statistical streamflow forecast accuracy and thus, could potentially improve water supply reliability in regions affected by changing snowpacks.     

Does the Temporal Resolution of Precipitation Input Influence the Simulated Hydrological Components Employing the SWAT Model?

This study aimed to evaluate the influence of sub‐daily precipitation time steps on model performance and hydrological components by applying the Green and Ampt infiltration method using the Soil and Water Assessment Tool (SWAT). Precipitation was measured at a resolution of 0.1 mm and aggregated to 5‐, 15‐, 30‐, and 60‐min time steps. Daily discharge data over a 10‐year period were used to calibrate and validate the model. Following a global sensitivity analysis, relevant parameters were optimized through an automatic calibration procedure using SWAT‐CUP for each time step. Daily performance statistics were almost equal among all four time steps (NSE ≈ 0.47). Discharge mainly consisted of groundwater flow (55%) and tile flow (42%), in reasonable proportions for the investigated catchment. In conclusion, model outputs were almost identical, showing simulations responded nearly independently of the chosen precipitation time step. This held true for (1) the selection of sensitive parameters, (2) performance statistics, (3) the shape of the hydrographs, and (4) flow components. However, a scenario analysis revealed that the precipitation time step becomes important when saturated hydraulic conductivities are low and curve numbers are high. The study suggests that there is no need in using precipitation time steps <1 h for lowland catchments dominated by soils with a low surface runoff potential if daily flow values are being considered. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Application of biomarkers to assess the condition of European Marine Sites

A series of European Marine Sites has been designated as Special Areas of Conservation (SAC) in England. The aim of this study was to develop a practical methodology to assess the condition of SACs by applying a suite of biomarkers. Biomarkers were applied to the blue mussel Mytilus edulis and the shore crab Carcinus maenas from the Fal and Helford SAC (Cornwall). Individual biomarkers provided useful diagnostic information on the activity of certain classes of contaminants and an integrated Biomarker Response Index (BRI) was used to achieve a more holistic understanding of the condition of the SAC. The BRI indicated that the general health of both organisms was impacted in the upper part of the SAC (Fal Estuary) which correlated well with known chemical hotspots and sources of contamination. The BRI allows a pragmatic way to prioritise SAC sites that may require further investigative studies.     

氮掺杂氧化钛的简易制备及可见光催化活性的研究

为开发对可见光响应的催化剂,以尿素为氮掺杂剂,采用简易溶胶-凝胶法制备氮掺杂氧化钛,并以2,4-DCP的降解检验其光催化活性。XRD、BET、XPS和UV-Vis漫反射光谱分析表明,随着氮/钛原子比（N/Ti)的增大,各催化剂晶粒尺寸减小,比表面积增大,锐钛矿相向金红石相的转变得到抑制,除0#样品出现金红石相外,其他催化剂均只出现锐钛矿相;掺入催化剂的N位于晶格O位点和晶格间隙,替代N和间隙N掺杂使催化剂的光吸收发生明显的红移。荧光光谱分析表明,当N/Ti在0～6范围内增加时,反应体系中·OH自由基的产生速率增加,当N/Ti增大至8时,速率则下降。相似的规律也表现在氮掺杂量对光催化活性的影响。适量氮掺杂能增强氧化钛的可见光催化活性,该改性催化剂可用于有机污染物的太阳光激催化降解。     

Regional impervious surface estimation: an urban heat island application

This paper describes a GIS-based estimation method that can be used to forecast future amounts of impervious surface as a mitigation measure for urban heat island effect in a metropolitan region. The method is unique because it employs a regression model that links the existing amount of impervious surface to population and employment at the census tract level. This approach provides a means to forecast future amounts of impervious surface based on projected population and employment. The method also includes a detailed analysis of high-resolution aerial photography to divide impervious surfaces into different categories. Subdividing impervious surfaces is necessary to evaluate potential urban heat island mitigation policies for different types of impervious surface. The analysis here shows that the impervious surface in the metropolitan Atlanta region will increase to 2638 km2 2. “The Albedo is defined as the hemispherical reflectivity averaged over the solar spectrum. A perfect reflector has a = 1, and a perfect absorber has a = 0” (Pomerantz et al. 1999 Pomerantz, M. 1999. Reflective surfaces for cooler buildings and cities. Philosophical magazine B, 79: 1457–1476. [Taylor & Francis Online], [Web of Science ®] [Google Scholar], p. 1458). View all notes in 2030, an increase of 45% from 2000. The most common type of impervious surface is dark-coloured pavement. Within this study area, the analyses showed that two-thirds of impervious surfaces are dark. Replacing dark pavement with light pavement materials, therefore, represents an important opportunity to mitigate the urban heat island effect in the Atlanta region.     

固相萃取-高效液相色谱法测定地表水中的溴氰菊酯

建立了固相萃取-高效液相色谱-二极管阵列扫描测定地表水中溴氰菊酯的方法。溴氰菊酯经C18小柱富集,用6．0mL二氯甲影丙酮（1：1,v／v）洗脱,氮吹转换溶剂为甲醇并定容至1mL后由高效液相色谱仪进行分析,检测波长为270hm,通过保留时间与特征紫外吸收图谱定性,外标法定量。方法检出限1．0ug／L;线性范围1．0～97．0ug,／L,／相关系数0．9999;相对标准偏差7．7％-17．5％（n=6）;回收率在90．6％～111．9％。方法简单,快速,经济环保。     

FS—IV^＋流动注射仪测定地表水中氨氮

铵与碱性酚和次氯酸钠反应生成靛蓝化合物,其色度与铵的浓度成正比,亚硝基氰化物使蓝色增强,在660nm处测量吸光度值;采用Flow Solution-IV^＋（FS-IV^＋）流动注射仪测定地表水中氨氮,检测范围0～10．00mg／L,检出限0．008mg／L,分析速率51个样S／h;对方法精密度、准确度、加标回收进行了实验,结果令人满意。该方法具有自动进样、分析速率快、试剂耗量低等优点,可应用于大批量常规地表水分析。     

环境工艺方法论研究——资源扩容法

资源扩容法是探索新型环境工程工艺的重要方法,其核心思想是认为世界上不存在绝对的废弃物,只有放错位置的资源。本文通过对资源扩容法理论及其应用实例的详细论述,揭示了资源扩容法所蕴涵的哲学理论。     

河北省地表水环境污染特征及分析

河北省1998年-2005年的水环境质量监测数据分析表明：河北省地表水污染恶化趋势基本得到遏制,但部分地区水污染矛盾仍很突出;水体总体污染减轻,但氨氮污染有加重趋势;主要湖（库）水水质稳定,但普遍呈不同程度的富营养化。在此基础上,分析了地表水污染的原因,并提出了河北省改善地表水环境污染的对策与措施。