洹河水中痕量有机污染物的研究

采用固相萃取技术 ,对洹河水中痕量有机物进行富集 ,大量的地表水被 C1 8键合相萃取后 ,洗脱液经干燥浓缩用于 GC和 GC/MS分析 ,鉴定出 64种有机物 ,并对苯系物、杂环类等 2 7种主要污染物作了定量测定 ,得出有机物的沿途变化规律。     

响应面法优化预氧化强化混凝处理铁锰地下水

以KMnO_4为氧化剂,Al_2(SO_4)_3·18H_2O为混凝剂,含铁锰离子地下水为模拟用水,考察预氧化强化混凝法的效果。利用响应面设计试验,分析氧化剂投加量、混凝剂投加量和pH值对铁锰去除的交互作用。模型优化结果显示,在氧化剂投加量4.16 mg/L,混凝剂投加量263.68 mg/L,pH值为7.54的最佳工艺参数下,铁锰去除率分别可达98.22%和97.49%。     

变光焊接眼护具响应时间定义分析

通过对不同标准的变光焊接眼护具响应时间定义分析，提出各标准定义及计算值的区别，以利于帮助消费者进行产品选择和企业对产品设计的改进。     

Using the ECLPSS software environment to build a spatially explicit component-based model of ozone effects on forest ecosystems

We have developed a modeling framework to support grid-based simulation of ecosystems at multiple spatial scales, the Ecological Component Library for Parallel Spatial Simulation (ECLPSS). ECLPSS helps ecologists to build robust spatially explicit simulations of ecological processes by providing a growing library of reusable interchangeable components and automating many modeling tasks. To build a model, a user selects components from the library, and then writes new components as needed. Some of these components represent specific ecological processes, such as how environmental factors influence the growth of individual trees. Other components provide simulation support such as reading and writing files in various formats to allow inter-operability with other software. The framework manages components and variables, the order of operations, and spatial interactions. The framework provides only simulation support; it does not include ecological functions or assumptions. This separation allows biologists to build models without becoming computer scientists, while computer scientists can improve the framework without becoming ecologists. The framework is designed to operate on multiple platforms and be used across networks via a World Wide Web-based user interface. ECLPSS is designed for use with both single processor computers for small models, and multiple processors in order to simulate large regions with complex interactions among many individuals or ecological compartments. To test Version 1.0 of ECLPSS, we created a model to evaluate the effect of tropospheric ozone on forest ecosystem dynamics. This model is a reduced-form version of two existing models: , which represents an individual tree, and , which represents forest stand growth and succession. This model demonstrates key features of ECLPSS, such as the ability to examine the effects of cell size and model structure on model predictions.     

Myrothecium verrucaria NF-08产漆酶条件的响应面法优化及粗酶染料脱色研究

以半知菌属疣孢漆斑菌Myrothecium verrucaria NF-08为供试菌,采用响应面方法优化菌株产漆酶条件,并以其漆酶粗酶进行3种结构类型6种染料的脱色试验,考察了粗酶浓度、温度和p H值对脱色率的影响.两水平析因设计、中心组合设计和验证试验结果表明:葡萄糖浓度为15.4 g·L~(-1)、蛋白胨浓度为43.3 g·L~(-1)和培养基初始p H值为6.68时,漆酶活性达到最大值(25.58±1.60)U·m L~(-1),是单因素试验(16.82 U·m L~(-1))的1.52倍,提高了52.1%.以上述发酵条件获得的M.verrucaria NF-08漆酶粗酶对3种结构类型染料均有脱色效果,排序为偶氮类优于芳甲烷类优于蒽醌类.脱色率随粗酶浓度增大(2~8 U·m L~(-1))、反应温度升高(15~35℃)而上升,随p H值上升(4~10)而下降.粗酶浓度为5 U·m L~(-1),反应温度为25℃,p H值为4时,偶氮类染料铬黑T和芳甲烷类染料碱性品红即可几乎完全脱色,脱色率分别为99.2%和94.6%.     

水力负荷对辐流式初沉池污染物去除效果的影响

以沉砂池出水为原水,在沉淀试验研究颗粒截留速度u0基础上,通过动态试验考察水力负荷对辐流式初沉池污染物去除效果的影响。研究结果表明无机悬浮固体(FSS)分离和总悬浮固体(TSS)高效去除的颗粒截留速度u0分别为0.025 m/min和0.05 m/min。由于泥层截留作用,水力负荷qA在46.3 m3/(m2.d)时,辐流式初沉池污染去除最高效,TSS、总氮(TN)和总磷(TP)去除率分别达到81%,23%,59%。     

Multi-response optimization of Fenton process for applicability assessment in landfill leachate treatment

Fenton process, as a pretreatment method, was found to be effective in the primary treatment of mature/medium landfill leachate. However, the main problem of the process is the large amount of produced sludge that requires an accurate feasibility evaluation for operational applications. In this study, the response surface methodology was applied for the modeling and optimization of Fenton process in three target responses, (1) overall COD removal, (2) sludge to iron ratio (SIR) and (3) organics removal to sludge ratio (ORSR), where the latter two were new self-defined responses for prediction of sludge generation and applicability assessment of the process, respectively. The effective variables included the initial pH, [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage. According to the statistical analysis, all the proposed models were adequate (with adjusted R² of 0.9116–0.9512) and had considerable predictive capability (with prediction R² up to 0.9092 and appropriate adequate precision). It was found that all the variables had significant effects on the responses, specifically by their observed role in dominant oxidation mechanism. The optimum operational conditions obtained by overlay plot, were found to be initial pH of 5.7, [H₂O₂]/[Fe²⁺] ratio of 17.72 and [Fe²⁺] of 195 mM, which led to 69% COD removal, 2.4 (l sludge/consumed mole Fe²⁺) of SIR and 16.5 (gCOD removed/l produced sludge) for ORSR in verification test, in accordance with models-predicted values. Finally, it was observed that [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage had significant influence on COD removal, while Fe²⁺ dosage and [H₂O₂]/[Fe²⁺] ratio had remarkable effects on SIR and ORSR responses, respectively.     

Biogenic VOCs emission inventory development of temperate grassland vegetation in Xilin River basin, Inner Mongolia, China

Given the key role of biogenic volatile organic compounds(VOCs) to tropospheric chemistry and regional air quality, it is important to generate accurateVOCs emission inventories. However, only a less fraction of plant species, in temperate grassland of Inner Mongolia, has been characterized by quantitative measurements. A taxonomic methodology, which assigns VOCs measurements to unmeasured species, is an applicable and inexpensive alternation for extensive VOCs emission survey, although data are needed for additional plant families and genera to further validate the taxonomic approach in grassland vegetation. In this experiment, VOCs emission rates of 178 plant species were measured with a portable photoionization detector( PID). The results showed the most of genera and some families have consistent feature of their VOCs emission, especially for isoprene, and provide the basic premise of taxonomic methodology to develop VOCs emission inventories for temperate grassland. Then, the taxonomic methodology was introduced into assigning emission rate to other 96 species, which no measured emission rates available here. A systematical emission inventory of temperate grassland vegetation in Inner Mongolia was provided and further evidence that taxonomy relationship can serve as a useful guide for generalizing the emissions behavior of many, but not all, plant families and genera to grassland vegetation.     

聚合氯化铝-腐殖酸(PACl-HA)絮体的物理与分形特征研究

采用低温急速冷冻-真空干燥技术制备了PACl-HA絮体的粉末样品,研究了这些样品的物理与分形特征.结果表明,PACl-HA絮体具有无定形结构,主要组成元素为C、O、Al,所含特征官能团保留了絮体组成原料的一些特征;絮体的BET比表面积为130～161 m²·g^-1,BJH累积吸附孔体积为0.38～0.52 cm³·g^-1,BJH脱附平均孔径为7.7～9.6nm,PSD峰值对应孔径8.4～11.2nm.PACl-HA絮体具有自相似性的粗糙表面,呈现多尺度分形特征;图象法和N₂吸附/脱附等温线法确定的表面分形维数Ds分别为2.03～2.26、2.24～2.37,前者的分形尺度大约处于23～390nm之间,主要属于絮体外表面尺度,而后者的分形特征尺度区间的下限大约为0.2nm,属于孔表面尺度;另外,对同一絮体,N₂吸附法和脱附法确定的孔表面分形维数不同.热力学模型计算出的D_s远大于3,与Sahouli等的研究不符.     

松针生理性质对其富集多环芳烃行为的影响

测定了雪松(Cedrus deodar)和黑松(Pinus thunbergii)松针的脂含量、气孔密度和比表面积等生理性质及松针中多环芳烃 (PAHs)浓度,考察了松针生理性质对其富集PAHs行为的影响.结果表明,雪松松针中PAHs浓度高于黑松,其平均总浓度(ΣPAHs)分别为(1101±692)ng/g和(518±339)ng/g,2种松针对PAHs的富集能力有较大差异,脂含量是决定松针富集PAHs量的首要因素.2种松针中PAHs组成均以3环和4环PAHs为主,分别占ΣPAHs的56%和31%以上.松针对于3环PAHs的富集能力强于4环PAHs,两者浓度差异约为2倍左右;对于5、6环PAHs,未发现其浓度与脂含量之间的相关关系.由于雪松和黑松松针的脂含量随比表面积具有不同的变化趋势,2种松针中PAHs浓度随比表面积的变化趋势相反.对于5、6环PAHs,松针比表面积和气孔密度对其浓度有显著影响.