Sources of underground CO: Crushing and ambient temperature oxidation of coal

As a harmful gas in underground coal mine, CO seriously threatened the safety of miners. Currently, the spontaneous combustion of residual coal in goaf is generally considered as the main source of underground CO. CO gas is also widely used as an indicator gas in fire prediction in mines. However, high concentrations of CO are also detected in some mines without spontaneous combustion of coal. Therefore, in the paper, with four ranks of coal, we studied other two potential CO sources: crushing and oxidation at ambient temperature. The more completely crushed coal produces more CO. The concentration of generated CO is inversely proportional to moisture content in coal. Therefore, the addition of water can inhibit the generation process of CO during the crushing process of coal. Lignite with low metamorphic grade can be oxidized to produce CO at ambient temperature (25 °C), and anthracite with high coal rank can be only oxidized to produce CO at 60 °C. Infrared spectra indicated that the coal with rich aliphatic hydrocarbons and oxygen-containing functional groups are more susceptible to oxidation at room temperature. Moreover, the smaller particle size of coal is more beneficial to the oxidation at ambient temperature to generate CO. CO generation during coal oxidation is also closely related to the ventilation rate.     

松散煤体渗流传热试验装置研制

为研究松散煤体低温氧化及通风供氧下的渗流传热规律,研发了渗流传热试验装置。试验装置由气体加湿系统、气体加热系统、煤样反应系统、数据采集系统和安全保护系统组成;本装置可实现自动加湿、控温、自动采集数据及处理数据。为解决装置使用和运行中的安全问题,设计了断电保护、有害气体检测等措施,保障试验装置的安全、可靠。     

A very simple yet accurate solution to the thermal explosion problem

A very simple solution to the thermal explosion problem for one-dimensional solids is presented. The solution produces analytical expressions for the criticality condition. Two different solutions are used. One solution gives higher answers than those known from exact solutions and the second solution gives lower answers. This allows bracketing the expected answer with a determined tolerance. The results obtained compare quite favorably with those obtained from known exact numerical solutions. This allows the utilization of the present method for many a practical problem with an acceptable tolerances.     

煤矿自燃火灾治理关键技术的研究与应用

介绍了使用同位素测氡法探测煤矿自燃火源位置的原理及应用效果。实践证明,该方法是解决煤矿自燃火灾治理难题的关键技术,由于投资少,精度高,软件处理直观可靠,它有重要推广价值     

雷管空中爆炸压力分布的理论计算

在对８＃ 雷管装药进行简化处理的基础上,其空中爆炸一定范围内的压力场分布可通过理论计算求得。近场参数可用自相似方法求解,而非近场参数又可用ＭａｃＣｏｒｍ ａｃｋ 两步格式对偏微分方程进行数值求解。将获得的压力场与实测结果进行比较,两者基本一致     

淮南矿区井下煤炭自燃火灾因素分析及防治措施

１９９０年以来,淮南矿区１１个矿井共发生自燃火灾４９起,自燃发火率平均为每百万吨习煤量０．５３次。通过对该矿区井下煤炭自燃因素和地质条件及开采中出现的自燃发火原因作了具体分析,从中找出发火规律;并对井下煤层自燃发火采取均压通风和直接灭火做了新的尝试,提出了对井下煤炭自燃防治措施。     

基于机器学习的电热防除冰表面温度变化趋势预测

针对飞机部件周期控制律电加热防除冰的应用,提出基于机器学习以预测电加热防除冰表面温度的变化趋势.依靠大型结冰风洞及其电加热防除冰控制系统完成防除冰试验,获得有效的试验数据,以通、断电周期为分割单元,将试验数据划分成验证集和训练集.根据电热防除冰过程的换热情况,构建样本的特征参数,利用机器学习的有监督学习方式,选择KNN近邻回归算法和局部线性加权回归算法预测温度变化率,再转换为温度,得到的温度变化与测量数据的线性相关性达到80％以上的高相似度结果,表明使用机器学习可快速预测电热防除冰部件的表面温度变化趋势,且不同的回归算法针对模型不同测温点位置的预测效果存在差异.     

Effect of soil layering on NAPL removal behavior in soil-heated vapor extraction

Soil heating has been proposed as a method to enhance the vapor extraction of NAPLs from contaminated soils. Three-dimensional fluid flow and heat transfer simulations have been performed for soil-heated vapor extraction to determine the transient system performance for a hypothetical configuration. Soil layering has been considered in evaluation of the initial non-aqueous phase liquid (NAPL) distribution and in evaporation and transport to the vapor extraction location. Results from this layered model are compared with results for a homogeneous system with an initially uniform NAPL, indicating the influence of layering, the initial NAPL distribution, the type of NAPL, and the possibility of enhanced vapor diffusion. Not only is the NAPL removal time reduced significantly with the addition of heat, but the uncertainty in the removal time owing to a number of difficult to characterize in situ factors, such as layering and the initial NAPL distribution, is much less than for standard soil vapor extraction without heating, owing to the rise in temperature and increase in NAPL vapor pressure with time.     

添加剂升温烧蚀法在制备新型介孔水环境净化材料中的应用

首次探索了一种破坏式造孔与有机复合相结合的新方法以制备介孔复合水环境净化材料,使最终产品成为一种具有广谱孔结构分布的复合环境材料。详细介绍了该方法的第二步工艺即添加剂升温烧蚀法,在优化后的最佳条件下,产品的孔径得到了进一步扩大,其中部分孔道直径可达至介孔级,同时材料的表面得到了进一步活化。经此步工艺后,所制备的中间产品染料吸附量是原材料的194倍,是酸洗刻蚀后产品的122倍;24h吸湿率是原材料的38倍,是酸洗刻蚀后产品的19倍。     

湿热法处理实现厨余垃圾饲料化的研究

探索了湿热法工艺处理厨余垃圾并将其饲料化的可行性.实验表明,湿热法处理可以在满足消毒杀菌的同时,降低厨余原料中的高油脂含量和高含盐量,调节营养成分,实现物化性状的均一.经湿热法处理后的厨余垃圾的饲用价值得到明显改善,可作为良好的饲料原料,同时可回收利用油脂.总之,湿热法工艺可实现厨余垃圾的无害化、减量化和资源化处理,对于消除环境污染、缓解我国饲料原料紧张及资源回收利用等方面有着显著的环境效益、社会效益和经济效益,具有重要的现实意义.