危险废物特性比较研究

介绍了中国、美国及欧盟等国家和地区危险废物危险特性的定义及其鉴别指标体系。通过对三者的优缺点比较,分析了我国定义危险特性存在的问题．提出了我国危险废物特性制定建议。     

城市垃圾填埋场中废气测定方法

本文介绍了城市垃圾填埋场中的废气用注射器采样．经气相色谱热导池检测器测定的方法．该方法具有简单、快速、成本低、准确性高、精密度好等优点，由本方法测得的城市垃圾填埋场废气中甲烷和二氧化碳含量可作为设计沼气回收利用的可靠依据。     

旋流板塔及其在废气处理中的应用

简述了旋流板塔原理、结构、设计参数，并列举了该塔在ＮＯｘ、有机废气、ＨＣｌ、燃油炉烟等方面治理工程应用实例。     

环境经济优化设计案例

本文列举三例，论述完善价格机制发展城市燃气供应事业、运用排污权交易思想削减二氧化硫污染和利用市场干预促进固体废弃物回收，分别设计出优化方案，并概算出预期环境经济效益。     

次级燃料还原燃烧产物内NOx的动力学特性研究

提出了在燃煤电站锅炉炉膛内添加次级燃料建立ＮＯｘ的还原区，以控制ＮＯｘ的排放，建立了描述ＮＯｘ还原动态过程的数学模型和化学动力学模型，对计算值和实测值作了比较分析。     

国外包装废物的处理技术动向

在欧、美、日等西方国家，废包装材料已成为主要的固体废物之一，其环境污染问题日益受到关注。本文较全面地介绍废包装材料的填埋、焚烧、循环回用、再资源化利用和减少使用包装材料等五种重要技术动击与途径。还重点介绍了美国的ＰＥＴ瓶的资源再利用，以及德国建立严格的包装废物法规和完善的处理系统的概况。     

中国废旧农用塑料薄膜的回收与利用

介绍了中国废旧农用塑料薄膜回收利用的现状 ;重点阐述了中国废旧农膜再生造粒技术 ,从工艺、成本利益、再生粒料的应用市场等各方面对该技术进行了详细的介绍和剖析 ,在论述其优越性的同时 ,指出了再生造粒技术存在的问题 ,为研究人员今后的研究工作指明了方向 ;最后对废旧农膜再生造粒技术的应用前景进行了展望。     

试论景真糖厂实施清洁生产及建立循环发展体系

对勐海县景真糖厂原料基地和各生产工段的生产状况进行了综合评价分析,探明了该糖厂生产中产生的"三废"排放特征,存在问题以及环境经济状况,提出了建立循环发展体系,进一步提高环境经济效益的措施建议。     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

氢化物发生一原子荧光光谱法测定气田废水中的痕量砷

采用氢化物发生－原子荧光光谱法测气田废水中的痕量砷。方法有取样量少，操作简单、灵敏度高、准确度高、重现性好等优点。砷的测定线性范围为1～200ng/mL，方法的检出限为0．0453ng/mL，相对标准偏差小于等于1．6％，加标回收率在96．0％～97．7％范围内。测定密码标样与气田废水中的痕量砷，获得了满意的结果。