板料液压成形技术的发展动态及应用

介绍了板料液压成形技术的发展 ,尤其是近几年发展起来的径向加压的液压成形、液压成对成形和粘性介质压力成形等 3种金属成形技术 ,以及近几年国外板料液压成形设备的开发和应用情况。     

开放市场条件下四川省环保系统各级环境监测站的发展方向

加入WTO后四川省环保系统监测站如何克服自身缺陷，积极应对国内外监测机构的挑战，是未来几年内各监测站所共同面临的问题。本文回顾了我省监测站监测能力现状，分析了入世后各级环境监测站所面对的形势，并结合四川省实际情况提出了我省环保系统环境监测站在开放市场条件下的发展重点和发展方向。     

落实科学发展观,推进莆田市污染治理进程

通过对近年来莆田市环境污染现状的调查分析，对莆田市环境发展趋势作出预测，提出环境污染治理对策措施，以推进莆田市环境污染治理进程。     

北京市耕地面积变化趋势预测及保护对策研究

耕地资源是人类生存和发展最重要的物质基础，也是不可再生的稀缺资源。特别是北京这样的国际大都市，人地矛盾十分突出，每寸土地都显得弥足珍贵。基于1996-2005年北京市的耕地面积数据，利用灰色模型预测方法建立GM（1，1）模型，对北京市2006-2010年的耕地面积变化趋势进行预测。预测结果显示，北京市耕地面积在未来几年内将呈现出持续减少的趋势，2010年耕地面积将比1996年减少约1／2。针对这种趋势和北京市的实际情况，提出了相应的耕地保护对策。     

厄尔尼诺事件对黑龙江省春夏季降水的影响

利用实际监测资料,分析了40年中厄尔尼诺(Elnino)现象与黑龙江省降水距平之间的时空变化关系.结果发现,厄尔尼诺现象发生的当年及前一年,黑龙江省以春季4-6月份少雨干旱与夏秋季7,8月份(除厄尔尼诺年前一年的8月份外)多雨洪涝为主要气候特征;在厄尔尼诺年的下一年,春季4,6月份与秋季8,9月份一般具有少雨干旱的趋势.     

TEMPORAL CHANGES IN THE YADKIN RIVER FLOW VERSUS SUSPENDED SEDIMENT CONCENTRATION RELATIONSHIP1

ABSTRACT: Dynamic linear models (DLM) and seasonal trend decomposition (STL) using local regression, or LOESS, were used to analyze the 50‐year time series of suspended sediment concentrations for the Yadkin River, measured at the U.S. Geological Survey station at Yadkin College, North Carolina. A DLM with constant trend, seasonality, and a log₁₀ streamflow regressor provided the best model to predict monthly mean log₁₀ suspended sediment concentrations, based on the forecast log likelihood. Using DLM, there was evidence (odds approximately 69:1) that the log₁₀ streamflow versus log₁₀ suspended sediment concentration relationship has changed, with an approximate 20 percent increase in the log₁₀ streamflow coefficient over the period 1981 to 1996. However, sediment concentrations in the Yadkin River have decreased during the decade of the 1990s, which has been accompanied by a concomitant increase in streamflow variability. Although STL has been shown to be a versatile trend analysis technique, DLM is shown to be more suitable for discovery and inference of structural changes (trends) in the model coefficient describing the relationship between flow and sediment concentration.     

我国道路交通安全发展情景分析

以日本和美国为例 ,分析了发达国家道路交通事故高发期的发展历程 ,得出了道路交通事故的上升与国家经济发展和机动化增长有着直接关系的结论。笔者通过分析和预测我国经济和道路交通的发展情景发现 ,今后我国道路交通发展特征和日本道路交通高发期的情况十分类似。如果现有交通管理体制和技术措施没有大的变化 ,我国道路交通事故死亡人数到 2 0 2 0年可能会超过 2 3万人。为此 ,国家应尽快改善道路交通管理方面所存在体制上、行政上和技术上的不足 ,防止出现笔者所预测的道路交通事故极其严重的局面。     

Analysis of Roadside Inhalable Particulate Matter (PM10) in Major Korean Cities

A data analysis of three major Korean cities was conducted to assess roadside inhalable particulate matter 10 μm or smaller in aerodynamic diameter (PM₁₀), including temporal and meteorological variations, over a recent period of 4 to 6 years. The yearly roadside PM₁₀ concentrations presented a well-defined increasing trend or no trend depending on the roadside monitoring station. Most mean values exceeded or approximated the Korean standard of 70 μg/m³ per year for PM₁₀. A representative roadside diurnal trend was characterized by a distinct morning maximum. In most cases, the Sunday roadside concentrations were similar to or somewhat lower than the weekday concentrations, and the PM₁₀ concentrations presented a well-defined seasonal variation, with the maximum concentration in March. The monthly maximum concentrations observed in March were most likely attributable to Asian dust storms. In two metropolitan cities (Seoul and Busan), the frequency of days with roadside PM₁₀ concentrations exceeding the standard of 150μg/m³ per 24 h was much lower for the roadside monitoring stations than for the residential monitoring station, whereas in the third city (Daegu), this result was reversed. Interestingly, the average maximum concentrations observed for the roadside sites in Seoul and Busan during March were higher than those for the residential sites, suggesting that the roadside concentrations responded more to the dust storms than the residential areas. The relationship between the pollutant concentrations and five important meteorological parameters (solar radiation, wind speed, air temperature, relative humidity, and precipitation) showed that the number and type of meteorological variables included in the equations varied according to the monitoring station or season. Finally, the current results confirmed that attention should be given to the PM₁₀ exposure of residents living near roadways.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

Quantifying population declines based on presence‐only records for red‐list assessments

Accurate trend estimates are necessary for understanding which species are declining and which are most in need of conservation action. Imperfect species detection may result in unreliable trend estimates because this may lead to the overestimation of declines. Because many management decisions are based on population trend estimates, such biases could have severe consequences for conservation policy. We used an occupancy‐modeling framework to estimate detectability and calculate nationwide population trends for 14 Swiss amphibian species both accounting for and ignoring imperfect detection. Through the application of International Union for Conservation of Nature Red List criteria to the different trend estimates, we assessed whether ignoring imperfect detection could affect conservation policy. Imperfect detection occurred for all species and detection varied substantially among species, which led to the overestimation of population declines when detectability was ignored. Consequently, accounting for imperfect detection lowered the red‐list risk category for 5 of the 14 species assessed. We demonstrate that failing to consider species detectability can have serious consequences for species management and that occupancy modeling provides a flexible framework to account for observation bias and improve assessments of conservation status. A problem inherent to most historical records is that they contain presence‐only data from which only relative declines can be estimated. A move toward the routine recording of nonobservation and absence data is essential if conservation practitioners are to move beyond this toward accurate population trend estimation.