A posteriori hazard analysis and feedback information of an accidental event in the grains storage of an agrochemical product

The present study concerns a hazardous event which occurred in an industrial storage tank of a ground insecticide. A preliminary post-accident approach of the hazard evaluation is performed. The rapid report of the presence of an unstable functional group in the active product and of its potential thermal instability (CHETAH indices) has led to complete this examination by an experimental study of thermal analysis using isotherm exposition measurement (DTA) or with temperature programming by differential scanning calorimetry (DSC) and oxidability tests (BAM). The apparent kinetics of decomposition of the active matter of the ground insecticide has been represented by a global Arrhenius law.

A model designed for the simulation of heterogeneous thermal runaways based on the numerical solution of the transient mass and energy balances has been further applied to define the critical conditions of the storage and simulate its behavior.

The results obtained during this analysis with the experienced feedback allowed us on one side to explain the hazardous event and especially on the other side to modify the operating protocol of the conditions of formulation of the active matter on the inert mineral support.     

垃圾堆酵对焚烧厂垃圾热值的影响

分析了垃圾焚烧厂的渗滤液；基于渗滤液的体积和ＣＯＤｃｒ值，估算焚烧厂垃圾堆酵对垃圾热影响以及焚烧厂垃圾的适宜堆酵时间，实验结果表明，上海生活垃圾渗滤液是生化性好的高浓度有机废液，堆酵５ｄ，其低位热值〉４６００ＫＪ／ｋｇ，可直接焚烧。     

SO2 gas adsorption by modified kaolin clays: influence of previous heating and time acid treatments

Modified kaolin clays were used as adsorbents for SO(2) gas adsorptions. The clays were heated up to 900 °C previous to acid treatments with 0.5 N sulfuric acid solutions at boiling temperature during different times up to 1440 min. Equilibrium adsorption at 25 °C and 0.1 MPa was carried out by using a volumetric apparatus. The samples were characterized by chemical analysis, X-ray diffraction and infrared analysis. The heating of the clays followed by acid treatment improved the adsorption capacity of the kaolin clays. The presence of amorphous silica and hydroxyl in the final products improved SO(2) adsorption capacity. Better properties for SO(2) adsorption were found in kaolin rich in not well ordered kaolinite clay mineral.     

Micro calorimeter study on the thermal stability of lithium-ion battery electrolytes

With the extensive applications of lithium-ion batteries, many batteries explosion accidents were reported. The thermal stability of lithium-ion battery electrolyte could substantially affect the safety of lithium-ion battery. The C80 micro calorimeter was used to study the thermal stability of several commonly used organic solvents and electrolytes. The samples were heated in argon atmosphere and air atmosphere, respectively. The chemical reaction kinetics was supposed to fit by an Arrhenius law, then the self-accelerating decomposition temperature was calculated. It is found that most of the samples are stable in argon atmosphere while decomposing in air atmosphere, and the single organic solvent is more stable than the electrolyte generally.     

Mathematical methods for application of experimental adiabatic data – An update and extension

The paper represents some results of comparative analysis of the methods used for processing and interpreting data of adiabatic calorimetry as well as applying it to practical situations. Specifically two approaches are compared – approximate method based on evaluation of simplified kinetics and a more comprehensive, simulation-based method that utilizes the evaluation of more detailed kinetic models.The analysis is focused on two important types of data processing – correction of experimental results on thermal inertia (phi-factor correction) and estimation of adiabatic time to maximum rate (TMR).The most widely cited method for phi-factor correction is considered and its improvement is proposed to enable more precise prediction of the adiabatic time scale. A procedure for phi-factor correction of pressure response is also proposed. The limitations of this enhanced Fisher's method are discussed by comparison with simulation-based method. All the illustrative materials are based on real examples.As an example of application, the simplified method will be used to predict TMR and its limitations will be discussed.     

Phosphate removal from domestic wastewater using thermally modified steel slag

This study was performed to investigate the removal of phosphate from domestic wastewater using a modified steel slag as the adsorbent. The adsorption effects of alkalinity, salt, water,and thermal modification were investigated. The results showed that thermal activation at 800℃ for 1 hr was the optimum operation to improve the adsorption capacity. The adsorption process of the thermally modified slag was well described by the Elovich kinetic model and the Langmuir isotherm model. The maximum adsorption capacity calculated from the Langmuir model reached 13.62 mg/g. Scanning electron microscopy indicated that the surface of the modified slag was cracked and that the texture became loose after heating. The surface area and pore volume did not change after thermal modification. In the treatment of domestic wastewater, the modified slag bed(35.5 kg) removed phosphate effectively and operated for 158 days until the effluent P rose above the limit concentration of 0.5 mg/L. The phosphate fractionation method, which is often applied in soil research, was used to analyze the phosphate adsorption behavior in the slag bed. The analysis revealed that the total contents of various Ca–P forms accounted for 81.4%–91.1%, i.e., Ca10–P 50.6%–65.1%, Ca8–P 17.8%–25.0%,and Ca2–P 4.66%–9.20%. The forms of Al–P, Fe–P, and O–P accounted for only 8.9%–18.6%. The formation of Ca10–P precipitates was considered to be the main mechanism of phosphate removal in the thermally modified slag bed.     

Removal of formaldehyde over MnxCe1-xO2 catalysts: Thermal catalytic oxidation versus ozone catalytic oxidation

MnxCe1- xO2（x： 0.3–0.9） prepared by Pechini method was used as a catalyst for the thermal catalytic oxidation of formaldehyde（HCHO）. At x = 0.3 and 0.5, most of the manganese was incorporated in the fluorite structure of Ce O2 to form a solid solution. The catalytic activity was best at x = 0.5, at which the temperature of 100% removal rate is the lowest（270°C）. The temperature for 100% removal of HCHO oxidation is reduced by approximately 40°C by loading 5 wt.% Cu Oxinto Mn0.5Ce0.5O2. With ozone catalytic oxidation, HCHO（61 ppm） in gas stream was completely oxidized by adding 506 ppm O3 over Mn0.5Ce0.5O2 catalyst with a GHSV（gas hourly space velocity） of 10,000 hr-1at 25°C. The effect of the molar ratio of O3 to HCHO was also investigated. As O3/HCHO ratio was increased from 3 to 8, the removal efficiency of HCHO was increased from 83.3% to 100%. With O3/HCHO ratio of 8, the mineralization efficiency of HCHO to CO2 was 86.1%. At 25°C, the p-type oxide semiconductor（Mn0.5Ce0.5O2） exhibited an excellent ozone decomposition efficiency of 99.2%,which significantly exceeded that of n-type oxide semiconductors such as Ti O2, which had a low ozone decomposition efficiency（9.81%）. At a GHSV of 10,000 hr-1, [O3]/[HCHO] = 3 and temperature of 25°C, a high HCHO removal efficiency（≥ 81.2%） was maintained throughout the durability test of 80 hr, indicating the long-term stability of the catalyst for HCHO removal.     

Chemiluminescence in evaluating thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. IV. Comparative study of various stabilizers in mass polymerization and emulsion resins

The thermal oxidative stability of ionic and emulsion ABS with various antioxidants and UV stabilizers was studied. It was found that Santonox R provides better protection than Irganox 1076 to both resins. It is also the case in formulations with Tinuvin 770 and Tinuvin 328.     

REGIONAL WATER QUALITY MANAGEMENT BY THE GENERALIZED REDUCED GRADIENT METHOD1

ABSTRACT: A river basin-wide water quality management system is considered. The river receives thermal as well as organic wastes. At-source treatment of these pollutants is imposed to control the basin-wide water quality. The related water quality standards are: the minimum DO concentration, the maximum allowable BOD concentration, the maximum allowable stream temperature, and the allowable rise in stream temperature. The general dynamic mathematical model representing water quality in streams and the thermal effects on BOD and DO concentrations is presented. The model is highly nonlinear in nature. The optimal management problem involving the model is solved by a recently developed nonlinear propgramming technique - the generalized reduced gradient (GRG) method. Comparison of results obtained by the GRG method vs. dynamic programming, and of results using a more realistic mathematical model vs. a simple model are presented. The analysis procedure can be applied to designing new and examining existing water quality programs, and to study the influence of alternate policies and constraints.     

Understanding Fish Behavior,Distribution, and Survival in Thermal Effluents Using Fixed Telemetry Arrays: A Case Study of Smallmouth Bass in a Discharge Canal During Winter

Advances in telemetry have facilitated the continuous monitoring of fish position and movement. At present, there are few examples where this approach has been applied to environmental monitoring or assessment. Here we 1) present a case study that used a fixed antenna array and continuously scanning coded receiving system to monitor the movement of radio-tagged smallmouth bass (Micropterus dolomieu) in a thermal discharge canal on Lake Erie during the winter of 1998/1999, and 2) evaluate the use of fixed telemetry arrays for environmental monitoring. Although the number of radiotagged bass in the canal decreased gradually over time, fish spent the majority of the winter in the canal. When in the canal, bass selected areas upstream of the tempering pumps where water was the warmest. This region was also high in habitat complexity, had adequate velocity refuges, and abundant forage. Despite residing in the thermal effluent throughout the winter, none of the fish monitored were observed to participate in reproductive activities in the canal in the Spring. Interestingly, during a biofouling chlorination pulse in May, 50% of radiotagged fish still residing in the canal left and did not return during the monitoring period. Utility infrastructure accessible to fish, including thermal effluents, should be considered as fish habitat and managed accordingly to minimize mortality and sublethal effects on resident and transient fish. Fixed telemetry arrays that permit the continuous monitoring of fish behavior as described in this paper are widely applicable to many issues in environmental management, monitoring, and conservation.