市政脱水污泥的间接干化动力学研究

以食用油为热介质,在不同油浴温度下,对市政脱水污泥进行间接干化试验,推导出间接干化动力学模型,并对收集的冷凝液进行水质分析。结果表明:冷凝液为高浓度有机废水,TOC占TC的比例为73.2010%~75.5983%;VFAs的主要组分是乙酸、丙酸、丁酸、异丁酸、异戊酸和正戊酸,其中异丁酸所占比例最高(45.597%),其次为丙酸(24.554%);通过动力学模型的参数估值,Z模型(n≠1)因高R~2值和低RSS值而能很好的预测间接干化过程。     

A review of hazards associated with primary lithium and lithium-ion batteries

Primary lithium batteries contain hazardous materials such as lithium metal and flammable solvents, which can lead to exothermic activity and runaway reactions above a defined temperature. Lithium-ion batteries operating outside the safe envelope can also lead to formation of lithium metal and thermal runaway. Despite protection by battery safety mechanisms, fires originating from primary lithium and lithium-ion batteries are a relatively frequent occurrence.This paper reviews the hazards associated with primary lithium and lithium-ion cells, with an emphasis on the role played by chemistry at individual cell level. Safety mechanisms to prevent the occurrence and limit the consequences of incidents are reviewed, together with safety tests to monitor compliance with battery safety regulations and standards. Incident information from news accounts and open literature sources are reviewed to extract causal information.It is concluded that the potential severity of incidents during storage, transport and recycling of waste batteries can be significantly higher than in end-use applications. Safe storage, packaging and labelling practices, as well as communication among the parties involved, are essential to ensure safety across the battery lifecycle. It is recommended that a database of lithium battery incidents would be valuable to improve the evidence base for informing accident prevention measures.     

SO2 gas adsorption by modified kaolin clays: influence of previous heating and time acid treatments

Modified kaolin clays were used as adsorbents for SO(2) gas adsorptions. The clays were heated up to 900 °C previous to acid treatments with 0.5 N sulfuric acid solutions at boiling temperature during different times up to 1440 min. Equilibrium adsorption at 25 °C and 0.1 MPa was carried out by using a volumetric apparatus. The samples were characterized by chemical analysis, X-ray diffraction and infrared analysis. The heating of the clays followed by acid treatment improved the adsorption capacity of the kaolin clays. The presence of amorphous silica and hydroxyl in the final products improved SO(2) adsorption capacity. Better properties for SO(2) adsorption were found in kaolin rich in not well ordered kaolinite clay mineral.     

Study of high-tech process furnace using inherently safer design strategies (I) temperature distribution model and process effect

High-tech industries, such as those producing semiconductor and TFT-LCD (Thin Film Transistor Liquid Crystal Display), have recently become the most important economic activities in Taiwan. Each of these industries has a complete chain of supply from raw material production, production pre-processing, product manufacturing, to waste handling. Any company in the chain is a critical component, since any accidents of fire, explosion, gas leakage, or power outage would cut off the supply chain, causing inability of continuous operation. In industries of semiconductor and TFT-LCD, great amounts of special gases and chemicals with many machinery equipments are used in the production processes. In cases of accidents or improper installation, this chain of supply, from raw material production, preproduction, product manufacturing, to waste handling materials and equipments may cause severe damages or incidents.This study used the existing model of the horizontal furnace to develop a simulation program. The simulation results were consistent with the existing model, and produced even slightly better results on temperature distribution and temperature sensitivity. The simulation model applied on a vertical furnace could provide data on furnace temperature control for industrial use. Meanwhile, this study also deduced actual temperature control and an ISD strategy, which are consistent with design strategy principles.The validation results on the proposed temperature distribution model suggested that the model can be applied in temperature distribution and sensitivity analysis to obtain adjustment and control models for various heating zones. In the case of a single tool, when processing reduction is 60 pieces, switching off the two heating zones can reduce 44% of power output, for a capacity utilization rate of 93.7% for the entire plant. The application of the proposed temperature control model can reduce power consumption by 121.4 kWh. In addition, with the same number of tools, facilities layouts in two cases have an area difference of 41.4775 m², thus shortening the evacuation time for operators. The experimental results proved that the proposed model has realized the ISD principles of intensification, attenuation, and limitation of effects.     

Ink and dirt behavior in pulping after artificial aging of cold-set offset printed newspapers in different humidity conditions

Although moisture has a decisive role in the permanence of cellulose and unprinted paper, its role in ink release from the surface of printed recovered papers remains unclear. This work aimed to determine whether various relative humidity levels in the artificial aging test affect ink release from the surface of the paper and its fibers when pulping cold-set offset printed newspapers in alkaline pulping conditions. The results showed that relative humidity variations from 30% to 70% negligibly affected ink release at 60 °C. However, compared with these lower humidity levels, exposure to 90% relative humidity for at least 25 h resulted in a higher ink content bound to fibers, a greater formation of visible dirt specks after pulping and a smaller formation of microscopic ink particles. In practical applications, the accurate estimation of climate effects during the storage and the transportation of recycled papers requires that humidity conditions are taken into account while performing artificial aging tests with paper products.     

便携式生保系统热控技术研究

热控系统是便携式生保系统的一个重要组成部分，其功能是维持航天员的热舒适性状态。舱外活动（ＥＶＡ）时间是影响热控系统设计的主要因素，它和代谢水平一起决定了热控系统的设计能力。热控系统的重量和体积直接影响某一设计方案的可行性。本文介绍了便携式生保系统中热控系统的设计要求和主要性能指标。通过分析，比较了几种热控系统的性能、提出了我国未来便携式生保系统热控系统的设计方案。     

Thermal neutron fluence from ultra low-level γ-ray spectrometry of spoons activated during the JCO criticality accident at Tokai-mura in 1999

During the JCO-accident in Tokai-mura in 1999, the surrounding village was irradiated by an uncontrolled neutron flux. At some locations in that village, the thermal neutron flux was determined retrospectively by measurement of the very low activity of ⁵¹Cr and ⁶⁰Co in stainless-steel spoons using γ-ray spectrometry in underground laboratories. Activities determined in the HADES underground facility are presented here, together with calibrations performed using a well-defined thermal neutron flux to directly estimate the fluence of thermal neutrons independent of most assumptions. The results show measurable ⁵¹Cr in three samples and ⁶⁰Co in four samples taken from locations at distances of up to 430 m from the accident location despite the elapse of 4 half-lives of ⁵¹Cr before measurement. Effects of air transport of the samples were considered and shown to be negligible.     

A posteriori hazard analysis and feedback information of an accidental event in the grains storage of an agrochemical product

The present study concerns a hazardous event which occurred in an industrial storage tank of a ground insecticide. A preliminary post-accident approach of the hazard evaluation is performed. The rapid report of the presence of an unstable functional group in the active product and of its potential thermal instability (CHETAH indices) has led to complete this examination by an experimental study of thermal analysis using isotherm exposition measurement (DTA) or with temperature programming by differential scanning calorimetry (DSC) and oxidability tests (BAM). The apparent kinetics of decomposition of the active matter of the ground insecticide has been represented by a global Arrhenius law.

A model designed for the simulation of heterogeneous thermal runaways based on the numerical solution of the transient mass and energy balances has been further applied to define the critical conditions of the storage and simulate its behavior.

The results obtained during this analysis with the experienced feedback allowed us on one side to explain the hazardous event and especially on the other side to modify the operating protocol of the conditions of formulation of the active matter on the inert mineral support.     

Photoperiod affects daily torpor and tissue fatty acid composition in deer mice

Photoperiod and dietary lipids both influence thermal physiology and the pattern of torpor of heterothermic mammals. The aim of the present study was to test the hypothesis that photoperiod-induced physiological changes are linked to differences in tissue fatty acid composition of deer mice, Peromyscus maniculatus (∼18-g body mass). Deer mice were acclimated for >8 weeks to one of three photoperiods (LD, light/dark): LD 8:16 (short photoperiod), LD 12:12 (equinox photoperiod), and LD 16:8 (long photoperiod). Deer mice under short and equinox photoperiods showed a greater occurrence of torpor than those under long photoperiods (71, 70, and 14%, respectively). The duration of torpor bouts was longest in deer mice under short photoperiod (9.3 ± 2.6 h), intermediate under equinox photoperiod (5.1 ± 0.3 h), and shortest under long photoperiod (3.7 ± 0.6 h). Physiological differences in torpor use were associated with significant alterations of fatty acid composition in ∼50% of the major fatty acids from leg muscle total lipids, whereas white adipose tissue fatty acid composition showed fewer changes. Our results provide the first evidence that physiological changes due to photoperiod exposure do result in changes in lipid composition in the muscle tissue of deer mice and suggest that these may play a role in survival of low body temperature and metabolic rate during torpor, thus, enhancing favourable energy balance over the course of the winter.