Upward movement of plutonium to surface sediments during an 11-year field study

An 11-year lysimeter study was established to monitor the movement of Pu through vadose zone sediments. Sediment Pu concentrations as a function of depth indicated that some Pu moved upward from the buried source material. Subsequent numerical modeling suggested that the upward movement was largely the result of invading grasses taking up the Pu and translocating it upward. The objective of this study was to determine if the Pu of surface sediments originated from atmosphere fallout or from the buried lysimeter source material (weapons-grade Pu), providing additional evidence that plants were involved in the upward migration of Pu. The ²⁴⁰Pu/²³⁹Pu and ²⁴²Pu/²³⁹Pu atomic fraction ratios of the lysimeter surface sediments, as determined by Thermal Ionization Mass Spectroscopy (TIMS), were 0.063 and 0.00045, respectively; consistent with the signatures of the weapons-grade Pu. Our numerical simulations indicate that because plants create a large water flux, small concentrations over multiple years may result in a measurable accumulation of Pu on the ground surface. These results may have implications on the conceptual model for calculating risk associated with long-term stewardship and monitored natural attenuation management of Pu contaminated subsurface and surface sediments.     

Speciation and quantification of vapor phases in soy biodiesel and waste cooking oil biodiesel

This study characterizes the compositions of two biodiesel vapors, soy biodiesel and waste cooking oil biodiesel, to provide a comprehensive understanding of biodiesels. Vapor phases were sampled by purging oil vapors through thermal desorption tubes which were then analyzed by the thermal desorption/GC/MS system. The results show that the compounds of biodiesel vapors can be divided into four groups. They include methyl esters (the main biodiesel components), oxygenated chemicals, alkanes and alkenes, and aromatics. The first two chemical groups are only found in biodiesel vapors, not in the diesel vapor emissions. The percentages of mean concentrations for methyl esters, oxygenated chemicals, alkanes and alkenes, and aromatics are 66.1%, 22.8%, 4.8% and 6.4%, respectively for soy biodiesel, and 35.8%, 35.9%, 27.9% and 0.3%, respectively for waste cooking oil biodiesel at a temperature of 25 ± 2 °C. These results show that biodiesels have fewer chemicals and lower concentrations in vapor phase than petroleum diesel, and the total emission rates are between one-sixteenth and one-sixth of that of diesel emission, corresponding to fuel evaporative emissions of loading losses of between 106 μg l⁻¹ and 283 μg l⁻¹. Although diesels generate more vapor phase emissions, biodiesels still generate considerable amount of vapor emissions, particularly the emissions from methyl esters and oxygenated chemicals. These two chemical groups are more reactive than alkanes and aromatics. Therefore, speciation and quantification of biodiesel vapor phases are important.     

Anaerobic dechlorination and redox activities after full-scale Electrical Resistance Heating (ERH) of a TCE-contaminated aquifer

The effects of Electrical Resistance Heating (ERH) on dechlorination of TCE and redox conditions were investigated in this study. Aquifer and groundwater samples were collected prior to and after ERH treatment, where sediments were heated to approximately 100 degrees C. Sediment samples were collected from three locations and examined in microcosms for 250 to 400 days of incubation. Redox activities, in terms of consumed electron acceptors, were low in unamended microcosms with field-heated sediments, although they increased upon lactate-amendment. TCE was not dechlorinated or stalled at cDCE with field-heated sediments, which was similar or lower compared to the degree of dechlorination in unheated microcosms. However, in microcosms which were bioaugmented with a mixed anaerobic dechlorinating culture (KB-1) and lactate, dechlorination past cDCE to ethene was observed in field-heated sediments. Dechlorination and redox activities in microcosms with field-heated sediments were furthermore compared with controlled laboratory-heated microcosms, which were heated to 100 degrees C for 10 days and then slowly cooled to 10 degrees C. In laboratory-heated microcosms, TCE was not dechlorinated and redox activities remained low in unamended and lactate-amended sediments, although organic carbon was released to the aqueous phase. In contrast, in field-heated sediments, high aqueous concentrations of organic carbon were not observed in unamended microcosms, and TCE was dechlorinated to cDCE upon lactate amendment. This suggests that dechlorinating microorganisms survived the ERH or that groundwater flow through field-heated sediments carried microorganisms into the treated area and transported dissolved organic carbon downstream.     

Effects of ferric oxide on decompositions of methyl ethyl ketone peroxide

Methyl ethyl ketone peroxide (MEKPO) is a widely used initiator for polymerization reaction and hardener in glass-reinforced plastic. However, MEKPO is an unstable reactive chemical and has caused several serious accidents all over the world. This work studied the thermal stability of MEKPO in the presence of ferric oxide as the contaminant through calorimetric and kinetic studies. The calorimetry was performed using Automatic Pressure Tracking Adiabatic Calorimeter (APTAC) to identify the effects of ferric oxide (different concentration) on important reactive hazards such as onset temperature and pressure hazard. Kinetic modeling was then performed to study the kinetics of the runaway reaction and estimate important kinetic parameters. The results indicate that in the low concentration range (<0.3%), ferric oxide has no significant effect on the thermal stability of MEKPO. However, in the high and intermediate concentration range of ferric oxide (i.e., 10%), the negative effect on the thermal stability of MEKPO was observed. This result is in agreement with the kinetic study result that the activation energy and frequency factor decrease dramatically in the high ferric oxide concentration range. The results provide necessary process safety information for the handling of MEKPO and also technical basis for the further study in this area.     

Thermal risk analysis of cumene hydroperoxide in the presence of alkaline catalysts

Many studies have been performed to clarify the basic thermal runaway hazards and kinetics of cumene hydroperoxide (CHP) decomposition. However, materials that are incompatible with CHP have not been clearly identified. Alkaline solutions have been used as a catalyst to form dimethylphenyl carbinol (DMPC) and dicumyl peroxide (DCPO); however, these solutions also affect the reaction and storage temperature of CHP. In this study, thermal calorimeters, differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2), were used to compare the effects of various bases on the decomposition of CHP in cumene. Specifically, the exothermic onset temperature, change in pressure over time, self-heating rate and heat of decomposition were evaluated. Moreover, to appraise the degree of hazard associated with the use of CHP, the compatibility of CHP with various substances was analyzed, and a risk matrix for thermal runaway reactions was obtained. The results of the present study could be used to design safety procedures for the production of CHP and its derivatives.     

Biodegradability of Thermally Aged PHB,PHB-V,and PCL in Soil Compostage

The biodegradability of poly--hydroxybutyrate (PHB), poly--hydroxybutyrate-co-valerate (PHB-V) and poly--caprolactone (PCL) were examined following thermal aging in an oven for 192, 425 and 600 h. Different temperatures, 100, 120 and 140°C for PHB and PHB-V and 30, 40 and 50^oC for PCL were used to assess the influence of this parameter on biodegradation. The biodegradability tests were done in soil compostage at pH 11.0 and involved measuring the residual mass of polymer. Thermal analysis of the polymers was done using a differential scanning calorimeter (DSC). The melting temperature and crystallinity were also determined. Thermal ageing increased the biodegradability only for PHB at 120 and 140^oC, and there was no correlation between crystallinity and the biodegradation of the polymers.     

Predicting the Thermal Effects of Dam Removal on the Klamath River

The Klamath River once supported large runs of anadromous salmonids. Water temperature associated with multiple mainstem hydropower facilities might be one of many factors responsible for depressing Klamath salmon stocks. We combined a water quantity model and a water quality model to predict how removing the series of dams below Upper Klamath Lake might affect water temperatures, and ultimately fish survival, in the spawning and rearing portions of the mainstem Klamath. We calibrated the water quantity and quality models and applied them for the hydrometeorological conditions during a 40-year postdam period. Then, we hypothetically removed the dams and their impoundments from the models and reestimated the rivers water temperatures. The principal thermal effect of dam and reservoir removal would be to restore the timing (phase) of the rivers seasonal thermal signature by shifting it approximately 18 days earlier in the year, resulting in river temperatures that more rapidly track ambient air temperatures. Such a shift would likely cool thermal habitat conditions for adult fall chinook (Oncorhynchus tshawytscha) during upstream migration and benefit mainstem spawning. By contrast, spring and early summer temperatures could be warmer without dams, potentially harming chinook rearing and outmigration in the mainstem. Dam removal might affect the rivers thermal regime during certain conditions for over 200 km of the mainstem.     

大型火力发电厂气体消防系统设计探讨

鉴于我国目前还未颁布烟烙尽 (INERGEN)和七氟丙烷 (FM - 2 0 0 )灭火系统设计规范 ,通过对大型火力发电厂气体消防系统进行分析 ,建议气体灭火系统设计中应做到 :有人值守的防护区域采用INERGEN或FM- 2 0 0灭火系统 ,防护区控制在 7个以内 ,不考虑备用量 ,减少其存储容积 ;无人值守的防护区域采用低压CO2 灭火系统 ,防止其较高灭火浓度对人体造成伤害。采用该设计方案可大大提高消防安全性和降低工程造价     

自反应性化学物质的热危险性评价方法

笔者进行的研究工作 ,给出了利用C80微量量热仪所测得的自反应性化学物质的热流速曲线 ,从而求解该物质的化学反应动力学参数 ,以及在Semenov模型下求解其自加速分解温度SADT(Self AcceleratingDecompositionTemperature)的方法 ,并将一些有机过氧化物、氧化剂和可燃剂的混合物的自加速分解温度的推算结果与实测值进行了比较。实验证明 ,该推算方法结论准确 ,是一种安全、简便、实用的反应性化学物质热危险性的评价方法     

池火特性参数计算及其热辐射危害评价

可燃性油品池火的火焰及其产生的热辐射 ,可能导致周围人员伤亡或设备设施损坏。笔者介绍了油品池火的质量燃烧速率、火焰长度、火焰倾角及火焰后拖量等特性参数的计算方法 ,提出了池火热辐射强度的预测模型 ,给出了热辐射伤害 /破坏准则 ,并进行了模拟计算和评价。