DOAS大气环境质量监测系统与传统点式采样监测法可比性研究

系统比较了DOAS大气监测系统与传统点式采样设备在测定环境空气中二氧化硫的性能。     

The feasibility of including sustainability in LCA for product development

The feasibility of combining the concept of sustainability principles and the methodology of Life Cycle Assessment (LCA) is examined. The goal is to achieve an operational tool that incorporates sustainability in product development and strategic planning. While the method outlined has the structure of LCA, it emphasises aspects and parameters often omitted from traditional LCA. The analysis and results can be either qualitative or semi-quantitative. Although a qualitative analysis is less time consuming, it can still highlight the important issues. Qualitative information, which is easily lost in a quantitative analysis, can be emphasised. One of the conclusions is that the method is well suited for screening analysis.     

Improvement of the antifouling characteristics in a bioreactor of polypropylene microporous membrane by the adsorption of Tween 20

Surface modification by physical adsorption of Tween 20 was accomplished on polypropylene microporous membranes (PPMMs). Attenuated total reflection-Fourier transform infrared spectroscopy (ATR/FT-IR) and scanning electron microscope (SEM) were used to characterize the chemical and morphological changes on the membrane surfaces. Water contact angles and relative pure water fluxes were measured. The data showed that the hydrophilic performance for the modified membranes increased with the increase in the adsorption amount of Tween 20 onto the surface or into the pores of polypropylene microporous membranes. To test the antifouling property of the membranes by the adsorption of Tween 20 in a membrane bioreactor (MBR), filtration for active sludge was performed using synthetic wastewater. With the help of the data of water fluxes and the FE-SEM photos of the modified PPMMs before or after operating in a MBR for about 12 d, the PPMMs with monolayer adsorption of Tween 20 showed higher remained flux and stronger antifouling ability than unmodified membrane and other modification membranes studied.     

综合福利视角下中国生态文明建设绩效评价及国际比较

基于强可持续研究范式,以生态经济学和可持续发展理论为基础,运用两阶段网络Super-EBM模型进行绩效测算和评价,打开生态福利转化过程的“黑箱”,基于综合福利视角将生态文明建设绩效进一步分解为生态经济效率和经济福利效率,实证研究部分选取2006-2015年的时间序列数据对中国“十一五”和“十二五”期间的生态文明建设绩效水平进行纵向分析,与此同时,选取42个国家2014年的截面数据进行横向的国际对比研究。研究表明：（1）“十一五”到“十二五”期间,中国生态文明建设绩效（0.986）整体水平一般,均未实现DEA有效,但“十二五”期间已呈现出逐年改善的利好趋势。国际比较层面,瑞士（1.647）、印度尼西亚（1.365）、爱尔兰（1.039）依次排名前三位,中国（0.297）排名相对靠后,位列倒数第二。各国之间差异较大,总体上呈现出“OECD国家（0.677）最高、G20国家（0.611）次之、金砖国家（0.417）最低”的态势。（2）从分阶段效率来看,无论是纵向分析还是横向对比,均发现第一阶段的生态经济效率明显低于第二阶段的经济福利效率,生态经济效率偏低是导致生态文明建设绩效总体水平偏低的主要原因。（3）与传统的单阶段、径向或非径向DEA模型相比,两阶段网络Super-EBM模型综合考虑了径向和松弛变量问题,测算出来的效率值更为精确,能够更为客观地反映现实。同时,对于其他领域涉及两阶段或多阶段生产系统的效率或绩效评估具有较好的借鉴价值。最后,根据上述结论提出相应的政策建议。     

低浓度渣油-水系乳化液的抑尘性能现场试验研究

本文介绍了作者用渣油－水系乳化液做路面抑尘剂在某矿露天坑３种不同类型路面进行的大规模工业性试验。现场测定结果表明：这种路面抑尘剂可以获得比较理想的防尘效果，长期使用该乳化液可取得显著的综合经济效益。     

连州电厂湿法烟气脱硫系统的综合评价

从技术性能、经济性能两方面对连州电厂的广东省首套石灰石 /石膏湿法烟气脱硫系统进行了全面的评价     

2024铝合金连接结构两种防护涂层耐蚀性研究

目的研究铝合金两种防护涂层在5%NaCl盐雾环境下的腐蚀疲劳性能。方法针对在两种涂层防护作用下的2024铝合金连接结构,开展实验室加速试验,采用"腐蚀环境-疲劳加载"交替循环的试验模式,得到铝合金两种防护涂层在5%NaCl盐雾环境下的腐蚀疲劳寿命值,对比分析涂层体系对铝合金连接结构的腐蚀疲劳寿命影响。结果 5%NaCl盐雾环境对于铝合金连接结构疲劳寿命有较大影响,相较于传统涂层,纳米涂层在5%NaCl盐雾环境下的防护效果更好。结论纳米涂层表面破坏后快速生成的致密氧化膜能有效提高涂层的耐蚀性能。     

环境模型的统计评价

系统地探讨了评价模型的统计指标,并在BOD反应动力学模型中使用,取得了较好的效果。     

Results of a questionnaire investigation on the management of environmental issues during conceptual design. A case study of two large made-to-order companies

This paper investigates the current treatment of environmental issues by two companies within the large made-to-order sector. Fifty questionnaires were issued to the design team of each company to assess current practice in the integration of environmental issues with design activities, awareness of environmental issues, awareness of existing environmental design tools and the preferred format for a potential clean design tool.     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.