Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

稠油污水生化性处理技术研究

为了探讨稠油污水能否使用生物法处理,以生活污水和农药厂生化池原菌种经过诱导驯化,分别培养了可以在稠油污水中生长的好氧菌种革兰氏阴性菌G-1和厌氧菌种革兰氏阴性菌G-2.以G-2和G-1对稠油污水进行顺序处理,可使其BOD5/CODCr达到0.26;采用SBR法对新疆稠油污水放大处理试验的结果：COD降至150 mg/L以下,各项指标达到GB8978-1998二级排放标准.     

Chemical and process mineralogical characterizations of spent lithium-ion batteries: An approach by multi-analytical techniques

Mineral processing operation is a critical step in any recycling process to realize liberation, separation and concentration of the target parts. Developing effective recycling methods to recover all the valuable parts from spent lithium-ion batteries is in great necessity. The aim of this study is to carefully undertake chemical and process mineralogical characterizations of spent lithium-ion batteries by coupling several analytical techniques to provide basic information for the researches on effective mechanical crushing and separation methods in recycling process. The results show that the grade of Co, Cu and Al is fairly high in spent lithium ion batteries and up to 17.62 wt.%, 7.17 wt.% and 21.60 wt.%. Spent lithium-ion batteries have good selective crushing property, the crushed products could be divided into three parts, they are Al-enriched fraction (+2 mm), Cu and Al-enriched fraction (?2 + 0.25 mm) and Co and graphite-enriched fraction (?0.25 mm). The mineral phase and chemical state analysis reveal the electrode materials recovered from ?0.25 mm size fraction keep the original crystal forms and chemical states in lithium-ion batteries, but the surface of the powders has been coated by a certain kind of hydrocarbon. Based on these results a flowsheet to recycle spent LiBs is proposed.     

Computing sustainable manufacturing index with fuzzy analytic hierarchy process

The growing industrial interest in adopting sustainability programmes has ushered in studies regarding sustainability indicators which have continually flourished in current literature. However, limited attention is given to the development of priority ranking, which is an important input for any adopting firm. This paper presents a hybrid multi-criteria approach in determining priority areas in sustainable manufacturing (SM). Using fuzzy analytic hierarchy process to address uncertainty in hierarchical decision-making, this paper determines SM priority strategies and eventually identifies even lower level strategies. The computed sustainable manufacturing index is presented at both the organizational and operational levels for a real case study of an industrial plastic manufacturing firm. This work provides a detailed and transparent hierarchical decision-making approach based on SM framework, the use of which could be valuable to practicing managers across industries in their pursuit of greater sustainability.     

PLC控制系统在钢渣热焖工艺中的应用

利用PLC控制系统,实现在钢渣热焖工艺中的恒压供水和钢渣热焖定时定量喷水的自动控制要求,具有国际先进水平,取得了良好的经济效益、社会效益和环境效益.     

1株异养硝化-好氧反硝化细菌DK1的分离鉴定及其脱氮特性

从某反应器活性污泥中分离筛选出1株假单胞菌属(Pseudomonas sp.)细菌,命名为DK1,并对该菌进行脱氮特性研究.在以葡萄糖为碳源,C/N量比为5时,分别以NaNO_3和NaNO_2为氮源,二者的好氧反硝化速率为4.09 mg·(L·h)-1和4.43mg·(L·h)~(-1).以二者同时为氮源脱氮率为100%;此外,菌株DK1具有异养硝化性能,NH_4~+-N平均去除速率为2.32mg·(L·h)-1.缺氧时以NO_2~--N为氮源菌株DK1可将一系列梯度浓度NO_2~--N(约100~300 mg·L-1)在36 h内降为0.当NO_3~--N和NO_2~--N同时存在时,菌株DK1会优先利用NO_3~--N进行反硝化.同时该菌株还具有同步硝化反硝化(SND)性能,可同时去除NH_4~+-N、NO_2~--N或NH_4~+-N、NO_3~--N,30 h内脱氮率分别达95.06%和94.69%.相同时间内在NH_4~+-N、NO_2~--N和NO_3~--N三者均存在时,脱氮效果最佳,达100%.菌株DK1的高效SND及反硝化性能表明其在处理含氮废水方面有一定的潜力和应用价值.     

SBR加载不同粒径磁性活性炭对其污泥颗粒化进程的影响机制

在相同序批式活性污泥反应器(SBR)中分别加载1.5 g·L~(-1)的80、140、200、和300目不同粒径的磁性活性炭(反应器编号依次为2、3、4、5号),同时以不投加磁性活性炭的SBR反应器(1号)作为对照组,研究各反应器污泥体积指数(SVI)、粒径分布特征、胞外聚合物(EPS)中胞外蛋白(PN)、胞外多糖(PS)的含量变化规律以及除污性能.结果表明,不同粒径磁性活性炭对污泥颗粒化进程有一定的影响,粒径过大、过小对促进污泥颗粒化进程的强化作用不明显,当磁性活性炭的粒径为140目和200目时,活性污泥很容易以其作为"成核"载体快速形成好氧颗粒污泥,并且形成的颗粒污泥结构紧密,沉降速率快.采用高斯函数分析污泥粒径分布和标准偏差发现,反应器运行的第50 d,3号和4号反应器内污泥平均粒径均达到了780μm以上,明显高于其他反应器,标准偏差分别为318.9μm和362.3μm,两反应器内形成的颗粒污泥粒径较均匀,处理系统较稳定.与此同时,投加不同粒径的磁性活性炭均有利于促进污泥胞外蛋白质PN含量的增加,对胞外多糖PS的含量影响不大;但合适的磁性活性炭粒径(140目和200目)越有利于污泥PN的分泌,颗粒化程度明显的3号和4号反应器的PN/PS比值均高于其他3个反应器.磁性炭基好氧颗粒污泥的形成符合"惰性内核模型".此外,3号、4号反应器对废水TN和TP的去除率分别达到50%和60%以上,均高于其他反应器.     

容积负荷对ABR-MBR工艺反硝化除磷性能的影响

采用连续流ABR-MBR组合工艺处理生活污水,研究不同容积负荷(volume loading rate,VLR)对该工艺反硝化除磷性能的影响,获得最佳工艺参数.试验考察ABR进水容积负荷(以COD计,下同)分别为0.76、1.01、1.51和2.27 kg·(m~3·d)~(-1)时系统去碳脱氮除磷的性能,并在各ABR容积负荷条件下考察MBR容积负荷对MBR反应器硝化性能的影响.结果表明,在ABR进水容积负荷为1.51 kg·(m~3·d)~(-1)的条件下,系统A2隔室COD去除量最大,并在MBR容积负荷为0.462 kg·(m~3·d)~(-1)时,MBR反应器中实现了短程硝化,系统NH_4~+-N和TN去除率分别达到90%和72%以上,厌氧释磷量为7.41 mg·L~(-1),缺氧吸磷量达到15.42 mg·L~(-1),出水PO_4~(3-)-P浓度低于0.5 mg·L~(-1),这表明短程硝化更有利于强化ABR-MBR系统的反硝化除磷性能.     

AAO工艺低氧条件下的运行及其模拟

利用厌氧-缺氧-好氧(AAO)工艺探讨了在好氧池低溶解氧(DO)浓度条件下的水质指标变化情况.结果表明,当好氧池DO浓度从2.00 mg·L~(-1)降低到1.00 mg·L~(-1)和0.50 mg·L~(-1)时,系统仍然具有良好的除磷脱氮效果,出水水质指标均满足我国《城镇污水处理厂污染物排放标准》(GB 18918-2002)中的一级A标准.在此基础上,基于Bio Win 4.1软件建立了AAO工艺的活性污泥模型,对模型参数进行了灵敏度分析,并利用动态模拟对模型参数中的聚磷菌吸收乙酸或丙酸的聚羟基烷酸(PHA)产率系数(YP/PHA,seq)、聚磷菌好氧氧化PHA的储磷率(YP/PHA,aerobic)、氨氧化菌的最大单位生长速率(μmax,A)和亚硝酸盐氧化菌的最大单位生长速率(μmax,N)进行了校验.此外,对系统的曝气能耗进行了模拟评估,结果表明,与好氧池DO浓度为2.00 mg·L~(-1)时相比,好氧池DO浓度为1.00 mg·L~(-1)和0.50 mg·L~(-1)时的空气流量可分别节省23.8%和38.1%,氧转移效率可分别提高7.2%和11.7%.     

1株海洋异养硝化-好氧反硝化菌的分离鉴定及其脱氮特性

以海水为基质,采用传统的微生物分离纯化方法,从海底沉积物中分离筛选得到1株耐盐异养硝化-好氧反硝化细菌y5,经形态、生理生化特性以及16S rRNA基因序列分析,鉴定该菌为克雷伯氏菌(Klebsiella sp.).对其脱氮特性及影响因素进行了研究,结果表明,菌株y5的最佳碳源为柠檬酸三钠,最适p H值为7.0,最适C/N为17.菌株均能以NH4Cl、Na NO2和KNO3为唯一氮源进行反应,36 h的去除率分别为77.07%、64.14%和100%.3种氮源共存时,36 h的去除率达到100%.表明菌株y5在高盐废水中具有独立高效的异养硝化和好氧反硝化作用.