加速腐蚀环境下LD2CS铝合金腐蚀损伤分析方法

目的研究LD2CS铝合金腐蚀损伤数据的分析方法。方法针对LD2CS铝合金腐蚀坑深度值,采用最小二乘支持向量机、BP人工神经网络和求和自回归移动平均等3种模型进行回归和预测分析。对比总结各种模型在小样本递增时间序列下的应用特点。结果对于LD2CS铝合金腐蚀坑深度值预测,最小二乘支持向量机在回归和预测上都有较高的精度。结论最小二乘支持向量机模型最适合LD2CS铝合金的腐蚀坑深度值预测。     

铝粉表面超声波化学镀Ni-Co合金的研究

目的在铝粉表面进行镀Ni-Co合金层的研究,为制备新型的空心陶瓷吸波材料提供基础原料。方法利用超声波化学镀法。结果铝粉经过超声波化学镀Ni-Co合金,质量增加平均百分率达到了89.0%,通过SEM,EDS和XRD分析,表明在铝粉表面形成了Ni-Co合金层。结论利用超声波化学镀法能够在铝粉表面形成Ni-Co合金层。     

CONTROL OF LAKE PHOSPHORUS WITH ALUMINUM SULFATE: DOSE DETERMINATION AND APPLICATION TECHNIQUES1

ABSTRACT: Nutrient diversion does not always bring about prompt and sufficient reduction in lake phosphorus concentration due to recycling from nutrient rich sediments. Certain lakes and reservoirs may continue to experience nuisance algal blooms and require additional restorative steps. The phosphorus precipitation/inactivation technique is a procedure to remove phosphorus from the water column and to control its release from sediments in order to achieve P-limiting conditions to algal growth. Aluminum salts have been used in advanced waste water treatment to remove phosphorus and this technology was extended to lake rehabilitation. Guidelines for dose calculation and application are generally lacking, and are provided in this report. The dose determination suggested here allows maximum application of aluminum to bottom sediments and thus emphasizes long term control of phosphorus recycling. Dose can be calculated directly from the alkalinity of the water to be treated. Titration of lake water samples of Varying alkalinity allows the establishment of the relationship between residual dissolved aluminum, alkalinity, and dose which can then be employed for lake scale applications of alum to lakes and reservoirs. Application equipment and procedures are described. These depend on site characteristics and treatment objectives and include lakeside stores, a distribution pipe, and an application barge and manifold. Alum may also be used to meet other restoration objectives including the treatment of problem flows and the reduction of particulate concentrations.     

铝及铝合金在自然水环境中的腐蚀行为对比研究

目的 分析研究铝及铝合金在自然水环境中的腐蚀行为。方法 通过开展LM3纯铝、5083铝、LF6M去包铝及带包铝在淡海水交替、海水及淡水自然环境下2 a的暴露试验,将3种环境下材料的腐蚀形貌、腐蚀速率进行对比。总结4种铝及铝合金材料在不同水环境下的腐蚀规律,对其腐蚀机理进行简要的探讨,并对其长周期的腐蚀行为进行预测。结果 通过对4种材料局部腐蚀协同影响因子(b)的对比可以发现,淡水环境对LM3纯铝局部腐蚀的影响最大,淡海水环境对5083铝合金局部腐蚀影响最大,淡水及淡海水环境对2种LF6M铝合金材料局部腐蚀的影响都很大。结论 5083、LF6M带包铝及去包铝,在淡海水交替自然环境下的耐蚀性能最差,LM3纯铝在淡水环境下耐蚀性能最差。     

聚合氯化铝与三氯化铁混凝剂在常规水处理中的运用

通过聚合氯化铅与三氯化铁在常规水处理的生产性实验，从经济成本、水质指标和实际使用存在的问题对其进行分析比较，并比较了两种混凝剂在常规水处理中的优缺点。     

改性人造沸石处理含黄玉铬洁(Ⅵ张焕)祯地下水的实验研究

为了提高人造沸石对地下水中铬(Ⅵ)的去除能力,采用氯化铝对人造沸石进行改性。确定最佳改性条件:20%氯化铝溶液,液固比12 mL/g,室温下以180 r/min振荡改性8 h;最佳除Cr(Ⅵ)条件:pH值为4～8,液固比为33.3 mL/g,室温下水浴恒温振荡2 h。改性沸石对铬(Ⅵ)的吸附符合Langmuir及Freundlich等温线方程,由Langmuir吸附等温线可得其吸附容量为5.624 mg/g。在最佳反应条件下,水样中铬(Ⅵ)浓度可由5 mg/L下降到0.026 mg/L,低于0.05 mg/L,满足GB/T 14848—93《地下水环境质量标准》Ⅲ类标准。     

浅论通风隔声窗的发展

分析当前通风隔声窗的现状,以及通风隔声窗发展中的几个关键点,即:安静、节能、智能、清新空气、美观;结合正升声学公司开发的通风隔声窗产品讨论通风隔声窗在未来住宅建筑中的应用。     

Oxidative removal of acetaminophen using zero valent aluminum-acid system: Efficacy, influencing factors, and reaction mechanism

Commercial available zero valent aluminum under air-equilibrated acidic conditions (ZVAl/H⁺/air system) demonstrated an excellent capacity to remove aqueous organic compounds. Acetaminophen (ACTM), the active ingredient of the over-the-counter drug Tylenol^®, is widely present in the aquatic environment and therefore the treatment of ACTM-contaminated water calls for further research. Herein we investigated the oxidative removal of ACTM by ZVAl/H⁺/air system and the reaction mechanism. In acidic solutions (pH < 3.5), ZVAl displayed an excellent capacity to remove ACTM. More than 99% of ACTM was eliminated within 16 hr in pH 1.5 reaction solutions initially containing 2.0 g/L aluminum and 2.0 mg/L ACTM at 25 ± 1\textcelsius. Higher temperature and lower pH facilitated ACTM removal. The addition of different iron species Fe⁰, Fe²⁺ and Fe³⁺ into ZVAl/H⁺/air system dramatically accelerated the reaction likely due to the enhancing transformation of H₂O₂ to HO. via Fenton's reaction. Furthermore, the primary intermediate hydroquinone and the anions formate, acetate and nitrate, were identified and a possible reaction scheme was proposed. This work suggested that ZVAl/H⁺/air system may be potentially employed to treat ACTM-contaminated water.     

原水性质对新型含Ca2+复合混凝剂混凝过程的影响

为了提高水处理效率,保证出水水质,需要开发新型高效混凝剂.本实验采用经过Ca2+改性的混凝剂针对不同水样进行混凝实验,考察了浊度、有机物去除、余铝和形成絮体性质.结果表明在纯颗粒物体系中,PACl(聚合氯化铝)和Al Cl3中加入的Ca2+对于浊度去除率无明显影响,在低投加量下能够有效降低沉后水中余铝浓度,Al Cl3做混凝剂,投加量0.10mmol·L~(-1)时,沉后水余铝浓度从0.15 mg·L~(-1)降低到0.10 mg·L~(-1).在腐殖酸体系中,混凝剂中的钙离子可明显降低腐殖酸分子的负电荷,降低沉后水余铝浓度以及增大絮体粒径.对于腐殖酸与蛋白质体系,当投加量为0.16 mmol·L~(-1)时,使用含有Ca2+的PACl做混凝剂时,钙离子的存在使得平衡时絮体粒径增加了大约50μm,可明显改善絮体的沉降性.碱性条件(pH=8.5)下改性混凝剂沉后水中DOC浓度降低0.2~0.6 mg·L~(-1),余铝降低0.4~0.7 mg·L~(-1).酸性条件(pH=5.5)下改性混凝剂沉后水DOC、余铝浓度无明显变化.     

新型硫酸铝-壳聚糖助滤剂强化砂滤效能研究

将硫酸铝和壳聚糖复配作为微絮凝助滤剂（AS-CTS）,考察其强化过滤性能.利用分子量分级、荧光光谱等手段分析有机物的去除特性,通过Zeta电位、絮体粒径、分形维数的变化分析其强化过滤机理.结果表明：AS-CTS较AS、CTS强化过滤效果明显,在AS/CTS复配比为2：1、CTS投加量0.3mg/L,转速300r/min,搅拌时间2min的条件下,砂滤出水浊度能达到0.1NTU、颗粒物125个/mL,残余铝浓度0.02mg/L;浊度和颗粒物去除率较未加AS-CTS分别提高了58%、61.7%.AS-CTS强化过滤可有效去除分子量>30KDa的腐殖酸和1~3KDa间的色氨酸类蛋白、溶解性微生物代谢产物、类富里酸.AS-CTS主要靠高分子吸附架桥作用和界面化学作用,增加胶体颗粒在滤料表面的粘附;通过形成较大粒径和分形维数的微絮体,增强絮体向滤料表面的迁移.