炼油污水深度处理回用工艺实验研究

试验工艺流程的方案选定,充分吸收了各炼油厂进行的污水深度处理的成功试验经验,以原臭氧生物活性炭工艺单元为基础,提出了以混凝气浮与臭氧生物活性炭串联工艺为核心的总体工艺流程,以降低工程投资及处理成本,提高污水回用的经济效益;同时,指出试验过程中所存在的问题及其对策。因此,开展炼油污水深度处理回用工艺试验研究,必将为炼油污水深度处理提供强有力的技术支撑,可作为相关污水回用处理工艺选择的参考。     

炭法烟气脱硫技术研究进展

炭法烟气脱硫技术经半个多世纪的发展，在脱硫剂、脱硫工艺、脱硫原理及联合脱除氮氧化物和有毒物质等方面取得了许多进展。在概述炭法烟气脱硫技术研究进展的同时，分析了制约炭法烟气脱硫技术发展的原因并对炭法烟气脱硫技术的发展方向提出了几点建议。     

ZnCl2-微波法制甘蔗渣活性炭工艺条件研究

以工业副产物甘蔗渣为原料,ZnCl2-微波法制备活性炭,用正交实验研究了活化剂ZnCl2浸泡浓度、浸泡时间、微波功率和作用时间等实验因素对活性炭性能的影响.     

Stabilization and utilization of hospital waste as road and asphalt aggregate

This article reports the operational results of the effective utilization of hospital waste molten slag produced using a high-temperature melting system, and being operated at a hospital in Selangor, Malaysia. The hospital waste is incinerated and subsequently melted at 1200°C. Scanning election microscope (SEM)/EDX results showed that the slag produced after melting contained amounts of SiO₂, CaO, and Al₂O₃ in excess of 53%, 9%, and 16%, respectively. The results from a leaching analysis on the slag produced proved that the melting process had successfully stabilized the heavy metals. The use of this slag as an alternative material to replace conventional aggregates for road construction was studied. The results from aggregate and asphalt mix tests showed that the slag produced fulfills all the requirements of an alternative aggregate. The average asphalt content, or the optimum asphalt content to be mixed with hospital waste molten slag, was found to be about 5.53%.     

垃圾焚烧飞灰中重金属的固化/稳定化处理实验研究

研究了城市生活垃圾焚烧-电灰的特性及飞灰中重金属的特性,对利用水泥作粘结剂进行飞灰固化/稳定化处理效果开展了系统的实验研究,分析了水泥固化/稳定化飞灰的工艺特点和最佳工艺参数,并讨论了粘结剂固化飞灰机理以及重金属浸出毒性,为进一步研究城市生活垃圾焚烧飞灰的无害化处理与利用提供了有重要价值的参考依据.     

电化学反应器吸附去除氟离子的研究

采用改性活性炭粉末对用纯净水加氟化钠配制而成的含氟水溶液进行动态电吸附去除实验.研究不同电压、电吸附时间,以及Cl-和SO2-4对氟离子去除的影响,并探讨吸附动力学和吸附方程.实验结果表明:活性炭对氟离子的吸附等温方程符合Freundlich方程,吸附动力学符合一级动力学方程;活性炭对氟离子去除与所施加的电位、吸附时间等因素有关,施加的电位越大,去除效果越好;随着吸附去除时间的延长,氟离子浓度下降趋缓;Cl-对氟离子去除影响很小,而SO2-4对氟离子去除有显著的不利影响.     

Effects of Short- and Long-Term Disturbance Resulting from Military Maneuvers on Vegetation and Soils in a Mixed Prairie Area

Loss of grassland species resulting from activities such as off-road vehicle use increases the need for models that predict effects of anthropogenic disturbance. The relationship of disturbance by military training to plant species richness and composition on two soils (Foard and Lawton) in a mixed prairie area was investigated. Track cover (cover of vehicle disturbance to the soil) and soil organic carbon were selected as measures of short- and long-term disturbance, respectively. Soil and vegetation data, collected in 1-m² quadrats, were analyzed at three spatial scales (60, 10, and 1 m²). Plant species richness peaked at intermediate levels of soil organic carbon at the 10-m² and 1-m² spatial scales on both the Lawton and Foard soils, and at intermediate levels of track cover at all three spatial scales on the Foard soil. Species composition differed across the disturbance gradient on the Foard soil but not on the Lawton soil. Disturbance increased total plant species richness on the Foard soil. The authors conclude that disturbance up to intermediate levels can be used to maintain biodiversity by enriching the plant species pool.     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

Robust technology policy against emission leakage: The case of upstream subsidies

Asymmetric regulation of a global pollutant between countries can alter the competitiveness of industries and lead to emissions leakage, which hampers countries’ welfare. In order to limit leakage, governments consider supporting domestic trade-exposed firms by subsidizing their investments in abatement technology. The suppliers of such technologies tend to be less than perfectly competitive, particularly when both emissions regulations and advanced technologies are new. In this context of twin market failures, we consider the relative effects and desirability of subsidies for abatement technology. We find a more robust recommendation for upstream subsidies than for downstream subsidies. Downstream subsidies tend to increase global abatement technology prices, reduce pollution abatement abroad and increase emission leakage. On the contrary, upstream subsidies reduce abatement technology prices, and hence also emissions leakage.     

Synthesis of branched,nano channeled,ultrafine and nano carbon tubes from PET wastes using the arc discharge method

Upcycling polymer wastes into useful, and valuable carbon based materials, is a challenging process. We report a novel catalyst-free and solvent-free technique for the formation of nano channeled ultrafine carbon tubes (NCUFCTs) and multiwalled carbon nanotubes (MWCNTs) from polyethylene terephthalate (PET) wastes, using rotating cathode arc discharge technique. The soot obtain from the anode contains ultrafine and nano-sized solid carbon spheres (SCS) with a mean diameter of 221 nm and 100 nm, respectively, formed at the lower temperature region of the anode where the temperature is approximately 1700 °C. The carbon spheres are converted into long “Y” type branched and non-branched NCUFCTs and MWCNTs at higher temperature regions where the temperature is approximately 2600 °C, with mean diameters of 364 nm and 95 nm, respectively. Soot deposited on the cathode is composed of MWCNTs with a mean diameter of 20 nm and other nanoparticles. The tubular structures present in the anode are longer, bent and often coiled with lesser graphitization compared to the nanotubes in the soot on the cathode.