房地产开发项目的环境污染和防治措施

随着我国房地产事业的蓬勃发展 ,建设开发过程中的环境问题日益突出 ,如果防治措施不当 ,会对环境造成一定危害。根据房地产开发项目的污染特点 ,分别采取不同的防治措施后 ,可以实现项目开发和环境保护的双赢。     

NitroMAC: An instrument for the measurement of HONO and intercomparison with a long-path absorption photometer

NitroMAC (French acronym for continuous atmospheric measurements of nitrogenous compounds) is an instrument which has been developed for the semi-continuous measurement of atmospheric nitrous acid (HONO). This instrument relies on wet chemical sampling and detection using high performance liquid chromatography (HPLC)-visible absorption at 540 nm. Sampling proceeds by dissolution of gaseous HONO in a phosphate buffer solution followed by derivatization with sulfanilamide/N-(1-naphthyl)-ethylenediamine. The performance of this instrument was found to be as follows: a detection limit of around 3 ppt with measurement uncertainty of 10% over an analysis time of 10 min. Intercomparison was made between the instrument and a long-path absorption photometer (LOPAP) during two experiments in different environments. First, air was sampled in a smog chamber with concentrations up to 18 ppb of nitrous acid. NitroMAC and LOPAP measurements showed very good agreement. Then, in a second experiment, ambient air with HONO concentrations below 250 ppt was sampled. While NitroMAC showed its capability of measuring HONO in moderate and highly polluted environments, the intercomparison results in ambient air highlighted that corrections must be made for minor interferences when low concentrations are measured.     

Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments

Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data and provide additional recommendations for design. In this paper, dimensioning of the crane cabin interior space was carried out using a sample of 64 crane operators’ anthropometric measurements, in the Republic of Serbia, by measuring workspace with 10 parameters using nine measured anthropometric data from each crane operator. This paper applies experiments run via full factorial designs using a combined traditional and Taguchi approach. The experiments indicated which design parameters are influenced by which anthropometric measurements and to what degree. The results are expected to be of use for crane cabin designers and should assist them to design a cabin that may lead to less strenuous sitting postures and fatigue for operators, thus improving safety and accident prevention.     

Workers’ exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations

The objective of the study was to investigate occupational exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations. The aim was also to compare the results to Directive 2013/35/EU. At 16 substations, 255 electric field measurements were performed. The highest mean value of the electric fields was 9.6?kV?m^?1. At 63% of substations the maximum values were over 10.0?kV?m^?1, and at 31% of the substations the 75th percentiles were over 10.0?kV?m^?1, which is the low action level (AL) according to Directive 2013/35/EU. All measured values were below the high AL (20.0?kV?m^?1). In the future, it is important to take into account that the measurements were only taken at Finnish 110-kV substations; therefore, it is not possible to generalize these results to other countries and different types of substations.     

Measurements of indoor radon concentrations in the Santiago de Compostela area

Galician soils are among those with the highest (222)Rn exhalation rates in Spain. A year-round study of the indoor (222)Rn concentration in buildings in the Santiago de Compostela area (Galicia, Northwest of Spain) was performed. The study is based on systematic samplings with active charcoal canisters, following a modified EPA 520/5-87-005 protocol. These measurements were complemented by others obtained using etched track dosimeters. Each data set follows a log-normal distribution, with a geometric mean of (253+/-3)Bqm(-3) for charcoal canisters and (285+/-2.5)Bqm(-3) for etched track detectors. After correcting for the different measuring conditions, the mean value of both methods differed by only 2%. A careful analysis of the seasonal dependence of our measurements did not reveal any significant seasonal variations in the (222)Rn concentration. Parallel to these measurements, different meteorological parameters were recorded, which revealed a direct correlation between the indoor radon concentration and the outdoor temperature derivative with respect to time.     

Towards eliminating systematic errors caused by the experimental conditions in Biochemical Methane Potential (BMP) tests

The Biochemical Methane Potential (BMP) test is increasingly recognised as a tool for selecting and pricing biomass material for production of biogas. However, the results for the same substrate often differ between laboratories and much work to standardise such tests is still needed. In the current study, the effects from four environmental factors (i.e. ambient temperature and pressure, water vapour content and initial gas composition of the reactor headspace) on the degradation kinetics and the determined methane potential were evaluated with a 2⁴ full factorial design. Four substrates, with different biodegradation profiles, were investigated and the ambient temperature was found to be the most significant contributor to errors in the methane potential. Concerning the kinetics of the process, the environmental factors’ impact on the calculated rate constants was negligible. The impact of the environmental factors on the kinetic parameters and methane potential from performing a BMP test at different geographical locations around the world was simulated by adjusting the data according to the ambient temperature and pressure of some chosen model sites. The largest effect on the methane potential was registered from tests performed at high altitudes due to a low ambient pressure. The results from this study illustrate the importance of considering the environmental factors’ influence on volumetric gas measurement in BMP tests. This is essential to achieve trustworthy and standardised results that can be used by researchers and end users from all over the world.     

Radon mapping by retrospective measurements - an approach based on CDs/DVDs

This article points out the ability to map retrospective ²²²Rn concentrations by home stored CDs/DVDs. The method employs the high radon absorption ability of the polycarbonate material of CDs and DVDs and their track-etch properties. The principle steps for the application of the method are addressed. The possibility for individual a posteriori calibration is studied, demonstrating that better than 10% accuracy in retrospective measurements is potentially achievable. Results from retrospective measurements in three different regions are shown, demonstrating the potential of the method for large-scale radon mapping. Comparison with independently evaluated retrospective ²²²Rn concentrations in places with known radon history was made and very good correspondence was observed. The experience indicates that the method can be used for large scale retrospective radon mapping and its applications can be expanded towards mapping of radon concentrations in water and soil gas.     

First in situ UV profile across the UTLS accompanied by ozone measurement over the Tibetan Plateau

Ultraviolet radiation (UV) and ozone can greatly affect human health and the Earth's ecological environment. By deploying a UV radiometer aboard a stratospheric balloon released at Qaidam (QDM) during the Asian summer monsoon (ASM) period in 2019, we provided in situ measurement of the UV profiles from the surface to the upper troposphere and lower stratosphere over the Tibetan Plateau (TP), China, for the first time. Based on two in situ UV profiles accompanied by four ozonesonde measurements, this study exhibited detailed variations of downwelling UV and vertical ozone distributions over the TP during the ASM period. The UV differences between the surface and stratospheric balloon flight altitudes were 16.7, 15.8, 12.6 and 18.0 Wm^?2 during the four ozonesonde launches. Due to the diurnal variations in photochemical production and the stratosphere-troposphere exchange, the integrated ozone columns below 30 km ranged from 184.4 to 221.6 DU from four ozonesonde measurements. A positive correlation between UV attenuation and ozone column was exhibited under low cloud cover and clear sky conditions. The results of this study are expected to improve our understanding of UV and ozone properties, as well as their potential effects on terrestrial ecosystems and living environments over this significant plateau.     

The Strange Career of the Ringelmann Smoke Chart

The Ringelmann smoke chart was used in the United States to assess smoke emissions in the early twentieth century. In fact, it may have been the most important method for measuring air pollution between the late 1800s and the environmental era. However, the popularity of the Ringelmann chart stood in stark contrast to its lack of precision, which smoke abatement experts recognized and discussed among themselves. However, the critique of the Ringelmann scale rarely left the circle of experts and never jeopardized its use. This article discusses the reasons for this striking phenomenon, pointing out that the Ringelmann chart had strong practical and symbolic advantages: it allowed smoke abatement to be conducted in a public and transparent way. With that, the history of the Ringelmann smoke chart is an instructive model for the social construction of measuring techniques.