破碎带对地下坑道动力响应影响的数值分析

为了研究破碎带的耗能作用及其对坑道结构动力响应的影响,根据某工程实例,建立了地冲击波作用下类岩体中坑道结构响应的计算模型,利用LS-DYNA3D有限元软件,分别计算了无破碎带和存在破碎带情况下坑道结构的动力响应。计算结果的对比分析表明,顶部破碎带使结构的加速度和位移等运动参数有不同程度的降低,但对结构所受到的应力影响不大;与之相反,侧部破碎带的存在使结构的加速度和位移等运动参数明显地增大。与顶部存在破碎带情况相比,侧部存在破碎带情况下坑道结构运动参数的峰值更大,对坑道结构安全更为不利。     

不同瓦斯压力下煤体力学特性试验研究

为研究瓦斯对煤体力学特性的影响,设计不同瓦斯压力条件下煤体单轴压缩试验,研究煤样力学参数及变形特征随瓦斯压力的变化趋势,探讨瓦斯对煤体力学性质的影响机制,得出单轴压缩下煤样力学参数,并记录煤样的破坏形态.研究结果表明:随瓦斯压力增大,应力-应变曲线压实阶段增大,弹性阶段缩小,失稳破坏后曲线缓慢下降,抗压强度和弹性模量单...     

Conservation by Design

Abstract: Conservation researchers are increasingly aware of the need to conduct interdisciplinary research and to engage nonscientists in practical applications of conservation biology. But so far, industrial designers have been left out of such collaboration and outreach efforts. Conservation of wildlife often depends on products such as nest boxes, feeders, barriers, and corridors, all of which have a designed component that is frequently overlooked. Furthermore, many products are adopted without testing on short or long time scales. We argue that the design of products for conservation, and hence their functionality, effectiveness, and value, can be improved through collaboration with industrial designers. We see four key benefits that can arise from interactions with industrial designers: improvement of product quality and value, innovation and improvement in functionality of products, harmonization of conservation products with local values, and development of a psychological biomimesis approach to design. The role of industrial designers in conservation projects would be to improve factors such as product durability, affordability, functionality, and aesthetic appeal to local people. Designers can also help to create multiple product options whose success can be tested in the field. We propose that collaborations with industrial designers can contribute to the development of improvements to existing products and innovations in the practice of animal conservation.     

EFFECTS OF NO-FLOW RIVER CONDITIONS ON THE PLATTE RIVER WELL FIELD1

ABSTRACT: Effects of no-flow river conditions on the quantity and quality of water in the Platte River well field of the City of Grand Island, Nebraska, were examined utilizing a finite-difference computer simulation model specifically developed for this well field. Results suggest that the effects of these no-flow periods on water quality may be most important. In particular, the no-flow periods eliminate the hydraulic barrier between the well field and an area north of the River that is contaminated with nitrate (concentrations in the 20 to 40 mg/1 NO₃-N range). They also change the direction and velocity of movement of the contaminated ground water. Simulation results indicate that contaminated ground water moves toward the well field with a velocity of 0.42 ft/d after 30 days of no-flow and 1.43 ft/d after 180 days of no-flow. Limiting no-flow conditions to 10 consecutive days would protect the well field.     

Utilization of cement kiln dust (CKD) in cement mortar and concrete—an overview

Solid waste management is one of the major environmental concerns around the world. Cement kiln dust (KKD), also known as by-pass dust, is a by-product of cement manufacturing. The environmental concerns related to Portland cement production, emission and disposal of CKD is becoming progressively significant. CKD is fine-grained, particulate material chiefly composed of oxidized, anhydrous, micron-sized particles collected from electrostatic precipitators during the high temperature production of clinker. Cement kiln dust so generated is partly reused in cement plant and landfilled. The beneficial uses of CKD are in highway uses, soil stabilization, use in cement mortar/concrete, CLSM, etc.Studies have shown that CKD could be used in making paste/mortar/concrete. This paper presents an overview of some of the research published on the use of CKD in cement paste/mortar/concrete. Effect of CKD on the cement paste/mortar/concrete properties like compressive strength, tensile strength properties (splitting tensile strength, flexural strength and toughness), durability (Freeze–thaw), hydration, setting time, sorptivity, electrical conductivity are presented. Use of CKD in making controlled low-strength materials (CLSM), asphalt concrete, as soil stabilizer, and leachate analysis are also discussed in this paper.     

Radiation Effects on Blends of Poly(ε-Caprolactone) and Diatomites

Poly(-caprolactone) (PCL) was blended with diatomaceous earth (diatomite) and irradiated with -rays to introduce cross-linking between PCL molecules or both components. The unwashed diatomite containing a little of a volatile component showed high efficiency of introduction of cross-linking, whereas that with no volatile component showed low efficiency of introduction of cross-linking. Elongational viscosity, melt viscosity, and modulus of PCL/diatomite blend irradiated at various doses were significantly improved. Enzymatic degradation of the PCL/diatomite blend became faster than that of the PCL, though that of the blend irradiated became slower.     

Influences of Magnesium <Emphasis Type="Italic">tri-</Emphasis>Silicate on the Physical,Mechanical, and Degradable Properties of Ultraviolet (UV) Radiation Cured Plain Board Surface

A series of formulations were prepared with different percentages of oligomer, epoxy diacrylate (EA-1020 ), monomer, 1,6 Hexane diol diacrylate,(HDDA) and different percentages of filler (Magnesium tri-silicate, Mg₂Si₃O₈). Irgacure 369 [2-Benzyl-2-dimethyl-amine-1 (4-morpholinophenyl) butanone-1] was used in the formulations as photoinitiator. Ultraviolet (UV) cured thin polymer films were prepared from these formulating solutions on clean glass plates. Pendulum hardness (PH), gel content and macro scratch hardness (MSH) of the UV cured films were studied. One percent Mg₂Si₃O₈ containing formulation showed the premium properties. The substrates (plain board) were coated by these formulating solutions and cured under the same UV lamp at different intensities of radiation. Various properties of the coated surface such as PH, gloss, adhesion, abrasion and MSH were investigated. The base coat containing 1% Mg₂Si₃O₈ and top coat containing 48% HDDA produced the best performance among all the formulations inspected. The degradable properties in different weathering conditions on PH, gloss, adhesion, abrasion and MSH were measured. The surface cured with the optimized formulation (E) again yielded the minimum loss of the properties.     

Developing sinks for CO<Subscript>2</Subscript> through forestation of temperate coastal barriers: an environmental business

Since the 1940s, some sectors of the sand dune barriers of Buenos Aires Province have been forested to fix the sand in the neighborhoods of resort villages. Man took advantage of the maritime climate and the shallow groundwater to introduce pine forests. Today, these forests reach more than 20 m in height and have developed soils of more than 0.05 m in thickness on former arid sands. Field data were referred to Landsat (TM) composite and Normalized Difference of Vegetation Index, NDVI, images to calculate forest density and covered area. Considering published tables of wood density for each species, the amount of total carbon storage was estimated on 318 t C ha^-1 (Mg=10⁶ g) in biomass and 86 t C ha^-1 in soils. The three areas analyzed at Miramar, Necochea and Claromecó have captured 658,868 t of carbon in the last 50 years. It is estimated that 150,000,000 t C could be sequestered within temperate dune barriers of Argentina, Uruguay and Brazil. Besides this ecological point of view, there is an important socio-economic factor that cannot be excluded.Presented at and revised subsequent to the 4th LOICZ Open Science Meeting, Bahía Blanca, Argentina. October 1999.     

西部大开发要加强生态环境保护和建设

在实施西部大开发进程中,对原本生态环境十分脆弱的现状必须予以重视,切实加强生态环境保护与建设。     

提高节理面c和φ对岩坡开挖变形的影响

为了反映岩质边坡在节理面注浆后的变形效应,首先,通过室内试验,分析注浆前后岩体变形和破坏的全过程,以探讨其抗剪性能(粘结力c和内摩擦角φ)的变化;然后,基于理想弹塑性本构模型的Mohr-Cou-lomb准则,运用拉格朗日元数值方法(FLAC3D),对岩坡注浆前后变形效应(水平位移、垂直位移、剪应变增量)进行模拟。结果表明:注浆加固后,岩体的位移场变得均匀和连续,节理面处的较大位移受到抑制,边坡的整体性得到提高,有利于边坡的稳定性。