Pearce型构造岩浆地球化学判别图评述——以玄武岩为例

自从六十年代板块构造的概念诞生以来,人们认识到有必要探讨古地理和古构造重建的方法.一段时期以来,很多学者(如Gilluly,1971)认为,岩浆作用与特定的大地构造环境紧密相关,不同的岩浆类型或火山岩系列产在一定的地壳环境,因而出现了许多运用主要或微量元素资料的分类体系或判别图.基于Irvine和Barager(1971)以及Miyashiro(1973)发表的主要元素图解能用来判别岩浆类型,而Pearce(1976)则介绍     

华南玄武岩红土化过程中微量元素地球化学

广东、海南的玄武岩．在强烈的红土化过程中．元素在红土剖面中发生迁移和残留、贫化和富集。根据红土化过程中元素的地球化学性状，将元素划分为活泼元素和不活泼元素两大类。并首次采用了元素它集因子这个概念来探讨红土化过程中微量元素的地球化学行为。最后讨论了红土化过程小金的表生富集作用。     

SBR法处理麻生物脱胶废水的T艺实验研究St

采用SBR法处理麻生物脱胶废水，实验考察了溶解氧、曝气时间、污泥负荷与处理效果的关系。结果表明，在限制性曝气及COD     

腈纶污水的分质处理

介绍某公司腈纶污水的水质特点，处理工艺、主要设备及构筑物设计参数。该污水预处理装置运行以来，处理效果良好，符合后续生化处理的进水要求。     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

中义隧道片理化玄武岩段大变形控制技术研究*

为进一步探究高地应力隧道软岩大变形控制技术,以中义隧道主洞片理化玄武岩段为工程背景,提出大变形Ⅰ型支护、大变形Ⅱ型支护、大变形Ⅱ型支护（围岩加固）3种大变形控制方案,以现场试验段监测为辅助验证,采用数值仿真对3种控制方案的控制效果进行对比分析。结果表明:适宜的支护成环时间具有减缓大变形的作用;在衬砌各部位累计最大变形控制方面,控制方案3较其他方案衬砌最大变形最少减小20.8%,且变形时程曲线最终收敛;围岩最大日变形量控制方面,经过开挖断面的进一步优化以及边墙部位塑性区围岩自承能力的提高,控制方案3最大日变形量较其他支护方案至少减小20.8%。结果显示控制方案3能够稳定控制片理化玄武岩大变形,且效果最好,研究结果可为类似工程提供设计依据。     

阴极氧还原产电生物可渗透反应栅的研究Ⅰ. 不锈钢毛电极模拟反应器

提出利用阴极氧还原和阳极微生物产电作用的产电生物可渗透反应栅（CORE-PRB）方法用于被有机物污染的地下水的修复,并以不锈钢毛为电极建立模拟反应装置验证了CORE-PRB的技术概念。实验中考察了分别以蔗糖＋醋酸盐和不同浓度的污泥消化液为进水时的反应电流,并研究电极距离对反应电流的影响。由于氧还原阴极阳极反应能力的限制,随着与阴极室距离加大,模拟反应装置各阳极室的电流迅速减小。有机基质的可生化性对模拟反应器的总电流也有显著影响。     

高性能纤维在个体防护装备上的应用现状及前景分析

高性能纤维是从化学纤维演化而来,是指耐高温、耐气候、耐化学腐蚀、质量轻、强度高、模量高的特种纤维材料。本文结合几种典型的高性能纤维的具体性能,对高性能纤维在个体防护装备上的应用现状及前景作了分析,旨在进一步推动高性能纤维在个体防护装备上的应用,从而在不同的使用情况下增强个体防护装备对人体的保护功能。     

一步法制备乙酸酐新工艺

本文提供了一步法制备乙酸酐的新工艺。它具有工艺简单、反应快、转化率高等优点,是小批量生产乙酸酐的最佳方法。     

The Effect of Hydroxyl Radical Generation on Free-Radical Activation of TMP Fibers

The purpose of this work was to study the mechanisms involved in free radical activation of thermal mechanical pulp (TMP) fibers with the ultimate goal of developing methods for bonding wood fiber without the use of traditional adhesives. The generation of hydroxyl radicals in a mediated Fenton system was studied using electron spin resonance (ESR) spin-trapping techniques and indirectly through chemiluminescence measurement. The activation of TMP fibers was also evaluated by ESR measurement of free phenoxy radical generation on solid fibers. The results indicate that low molecular weight chelators can improve Fenton reactions, thus in turn stimulating the free radical activation of TMP fibers. However, it was also shown that excessive and prolonged free radical treatment may cause the destruction of fiber phenoxy radicals. In conclusion, this study demonstrates the potential for application, but also the complexity of free radical chemistry in biological materials, especially with regard to the chelation of transition metals and the interaction between free radicals.