Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

吉林省主要覆膜作物地膜残留情况调查

通过文献调研、问卷调查和典型样点采集的方法对吉林省3种主要覆膜作物的地膜残留情况进行调查分析,结果表明：地膜残留量与覆膜年限、地膜回收方式以及种植作物种类密切相关。随覆膜时间的延长地膜残留量有增加的趋势。3种模式地膜残留量由高到低为：瓜菜模式〉玉米连作模式〉花生连作模式,连续覆膜10年,3种模式的地膜残留量分别为30、28.35 kg·hm^-2和15.9kg·hm^-2。以一级污染水平作为标准（75 kg·hm^-2）,覆膜量每年按75～150 kg·hm^-2、年残留率按1.2%～4.02%计,估算吉林省安全使用地膜的年限约为12～83年。     

铸造废砂／废地膜／粘附土三元复合体系的研究

通过X射线衍射分析、红外光谱分析、热分析、电镜及能谱分析、图像分析,可以判断废旧地膜上粘附土的主要矿物质是结晶二氧化硅（粉粒级石英）,它们与聚合物基废弃物复合材料中作为填料的铸造石英砂的性状类同。废旧地膜可以不经清洗,直接与铸造废砂制备复合材料,这可大大降低复合材料的加工成本。这种复合材料实际上是由基体PE、粘附土中大量的SiO2和铸造石英砂SiO2组成的三元复合体系。     

聚己内酯与聚羟基丁酸戊酸酯的脱氮性能对比

以可生物降解聚合物聚己内酯(PCL)和聚羟基丁酸戊酸酯(PHBV)作为反硝化缓释碳源和微生物载体,利用清水释碳和批式反硝化试验选出适用于再生水反硝化深度脱氮生物滤池的可生物降解碳源滤料,通过比较与分析碳源滤料的表面形态及物质特性和附着微生物的群落特征揭示其性能优越的原因.结果表明,PHBV反硝化启动时间短,反硝化速率高,剩余有机物浓度低,相比PCL具有更稳定持续的反硝化效果.原因是其表面粗糙,且含有大量C—O和CO等亲水性基团,易于微生物附着和降解利用;其表面附着的微生物种类多样,其中发硫菌属(Thiothrix)、假单胞属(Pseudomonas)、菌胶团属(Zoogloea)、黄杆菌属(Flavobacterium)和脱氯菌属(Dechloromonas)等优势菌属均具有异养反硝化功能.因此,PHBV更适合作为再生水反硝化深度脱氮生物滤池的碳源滤料.     

Effect of environmental parameters on the degradability of polymer films in laboratory-scale composting reactors

Previous research in our laboratory reported a convenient laboratory-scale composting test method to study the weight loss of polymer films in aerobic thermophilic (53°C) reactors maintained at a 60% moisture content. The laboratory-scale compost reactors contained the following synthetic compost mixture (percentage on dry-weight basis): tree leaves (45.0), shredded paper (16.5), food (6.7), meat (5.8), cow manure (17.5), sawdust (1.9), aluminum and steel shavings (2.4), glass beads (1.3), urea (1.9), and a compost seed (1.0) which is designated Mix-1 in this work. To simplify the laboratory-scale compost weight loss test method and better understand how compost mixture compositions and environmental parameters affect the rate of plastic degradation, a systematic variation of the synthetic mixture composition as well as the moisture content was carried out. Cellulose acetate (CA) with a degree of substitution (DS) value of 1.7 and cellophane films were chosen as test polymer substrates for this work. The extent of CA DS-1.7 and cellophane weight loss as a function of the exposure time remained unchanged when the metal and glass components of the mixture were excluded in Mix-2. Further study showed that large variations in the mixture composition such as the replacement of tree leaves, food, meat, and sawdust with steam-exploded wood and alfalfa (forming Mix-C) could be made with little or no change in the time dependence of CA DS-1.7 film weight loss. In contrast, substituting tree leaves, food, meat, cow manure, and sawdust with steam-exploded wood in combination with either Rabbit Choice (Mix-D) or starch and urea (Mix-E) resulted in a significant time increase (from 7 to 12 days) for the complete disappearance of CA DS-1.7 films. Interestingly, in this work no direct correlation was observed between the C/N ratio (which ranged from 13.9 to 61.4) and the CA DS-1.7 film weight loss. Decreasing moisture contents of the compost Mix-2 from 60 and 50 and 40% resulted in dramatic changes in polymer degradation such that CA DS-1.7 showed an increase in the time period for a complete disappearance of polymer films from 6 to 16 and 30 days, respectively.Guest Editor: Dr. Graham Swift, Rohm & Haas.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

生物可降解地膜覆盖对关中地区小麦-玉米农田温室气体排放的影响

为探究生物可降解地膜覆盖对冬小麦-夏玉米轮作农田生态系统温室气体排放的影响,布设了普通地膜覆盖（PM）、生物可降解地膜覆盖（BPM）和无覆盖（CK）这3个处理,采用静态暗箱-气相色谱仪法监测了2018～2019年土壤CO₂、 CH₄和N₂O的排放通量,并用水分利用效率（WUE）、温室气体排放强度（GHGI）和净生态系统经济预算（NEEB）指标评估覆膜对作物产量、农田环境和经济效益的影响.结果表明,与CK相比,PM和BPM增加了玉米季土壤CO₂的排放,PM处理下CO₂排放总量高于BPM处理（P>0.05）.PM和BPM处理均能够显著减少土壤对CH₄的吸收,CH₄的年吸收量较CK处理分别减少了42.0%和24.2%（P<0.05）.与CK相比,PM和BPM增加了小麦季N₂O排放总量（P>0.05）,而显著降低了夏玉米季N₂O排放（P<0.05）.覆膜能够提高作物产量和水分...     

Polymer Mineralization in Soils: Effects of Cold Storage on Microbial Populations and Biodegradation Potential

Soil retrieval, processing and storage procedures can have a profound effect on soil microorganisms. In particular, changes in soil microbial populations may adversely affect the biological activity of a soil and drastically alter the soil's potential to mineralize added substrates. The effects of cold storage on the biodegradation of a series of test polymers was investigated using two soils—a synthetic soil mix (SM-L8) and a field soil (Bridgehampton silt loam) from Rhode Island (RI-1). Biodegradation tests were conducted using freshly prepared/collected soil and again following storage at 4°C for 3 to 8 months. Prior to each biodegradation test, the soils were incubated at 60% water-holding capacity (WHC) and 25°C to rejuvenate the microbial populations; the soils were incubated for periods of 48 h (freshly collected soil) or 25 days (soils stored at 4°C). Soil microbial populations were assessed by enumerating different segments of the population on agar plates containing different selective media. Mineralization of the test polymers (cellulose, poly-3-hydroxybutyrate, and starch acetate, d.s. 1.5) was monitored using standard respirometric techniques. Our results demonstrated that cold storage had a generally negative effect on the soil microbial populations themselves but that its effect on the capacity of the soil microorganisms to degrade the test polymers varied between soils and polymer type. Whereas cold storage resulted in dramatic shifts in the community structure of the soil microbial populations, substantial restoration of these populations was possible by first conditioning the soils at 60% WHC and ambient temperatures for 25 days. Likewise, although the effects of cold storage on polymer mineralization varied with the test polymer and soil, these effects could be largely offset by including an initial 25-day stabilization period in the test.     

Al3+离子掺杂对负载TiO2薄膜光催化活性的影响

以钛酸丁酯和Al2(SO4)3·18H2O为原料,采用溶胶凝胶法在钛片、玻璃、釉面瓷砖、陶瓷、不锈钢和铝片六种载体上制备了Al3+掺杂TiO2薄膜,讨论了不同Al3+掺杂浓度下,不同载体表面上制备的TiO2薄膜对甲基橙脱色率的影响。试验结果表明Al3+对TiO2薄膜的掺杂效果与载体的类型密切相关,并且不同载体其Al3+掺杂的最佳浓度也不同。Al3+掺杂后,TiO2薄膜光催化活性提高最大的是玻璃,其次是釉面瓷砖、铝片、钛片、陶瓷,最差的是负载不锈钢。     

载体好氧预挂膜处理对厌氧生物颗粒性能的影响

研究了生物膜载体经好氧预挂膜处理对厌氧附着膜膨胀床(AAFEB)反应器中生物颗粒性能的影响.载体经10 d好氧预挂膜处理后,形成了7～8 μm厚的生物膜,在起动运行过程中,处理反应器中载体的挂膜进程比对照要快.在整个运试期间,处理反应器中的生物膜厚度和污泥浓度值均高于对照.前者厌氧生物颗粒致密、结实,生物膜结构良好,滞留于反应器中的性能较佳,比后者较不宜随水流失.处理反应器厌氧生物颗粒的一些性能指标值,如最大比产酸活性、最大比产甲烷活性、脱氢酶活性、辅酶F₄₂₀含量等均高于对照.另外,厌氧生物颗粒内微生物相也有明显的差异.      

聚合反应时间对聚酰亚胺基碳膜结构和性能的影响研究

目的 系统研究前驱体聚合反应时间对PI膜及其碳化、石墨化后薄膜结构和性能的影响规律。方法 通过调整聚合合成聚酰胺酸（PAA）溶液过程中的反应时间,制备石墨膜前驱体聚酰亚胺（PI）原膜,将不同工艺条件下制得的PI膜进行碳化、石墨化处理,得到高导热率石墨膜。利用扫描电镜、红外光谱、拉曼光谱仪和LFA激光闪射仪对制备的PI膜、碳化膜及石墨膜的微观结构和热导率进行检测。结果 随聚合反应时间的延长,PI膜酰亚胺化程度和石墨膜的石墨化程度及导热性能先增高、后降低。反应时间为3 h时,制得的石墨膜结构致密,石墨片层取向性好,导热性能最好,热导率可达765.2W/(m·K)。结论 PI膜前驱体聚合反应时间显著影响PI膜酰亚胺化的程度和有序度,进而影响石墨膜的定向性和导热性能。