机载产品盐雾试验结果评定判据分析与探讨

针对当前机载产品盐雾试验标准中缺少明确、可量化评估指标,试验结果评定判据粗略笼统且以定性评价为主,已不能满足产品发展和使用环境扩展需求等现状,在总结国内外现行盐雾试验标准的结果评定要求基础上,分析当前机载产品盐雾结果评定判据存在的问题与不足,从管理和技术两个层面提出改进试验结果评定可操作性的建议,指导机载产品盐雾试验实施与评价。     

密封组合形式对结构密封性能影响研究

目的研究密封组合形式对结构密封性能的影响。方法开展密封性能试验,从密封形式、装配形式和涂覆形式的3种组合形式开展试验研究,找出结构密封性能影响因素,筛选密封最优组合形式。结果结构密封3种组成形式分别为有无贴合面的密封形式,干涉装配、湿装配形式,部分涂覆、全涂覆形式。开展2种应力水平下8种密封组合形式的密封性能试验,在保证密封工艺质量条件下,按照飞机结构和受载特点选取合理密封组合形式能有效提高结构密封性能。结论在飞机应力较高、不常拆的密封部位应选择贴合面密封、干涉装配、部分涂覆的密封组合形式,在飞机结构设计要求间隙装配、常拆卸的密封部位选择贴合面密封、湿装配、部分涂覆的密封组合形式。     

An integrated assessment model for cross-country pipelines

The cross-country petroleum pipelines are environmentally sensitive because they traverse through varied terrain covering crop fields, forests, rivers, populated areas, desert, hills and offshore. Any malfunction of these pipelines may cause devastating effect on the environment. Hence, the pipeline operators plan and design pipelines projects with sufficient consideration of environment and social aspects along with the technological alternatives. Traditionally, in project appraisal, optimum technical alternative is selected using financial analysis. Impact assessments (IA) are then carried out to justify the selection and subsequent statutory approval. However, the IAs often suggest alternative sites and/or alternate technology and implementation methodology, resulting in revision of entire technical and financial analysis. This study addresses the above issues by developing an integrated framework for project feasibility analysis with the application of analytic hierarchy process (AHP), a multiple attribute decision-making technique. The model considers technical analysis (TA), socioeconomic IA (SEIA) and environmental IA (EIA) in an integrated framework to select the best project from a few alternative feasible projects. Subsequent financial analysis then justifies the selection. The entire methodology has been explained here through a case application on cross-country petroleum pipeline project in India.     

A Global Overview of Atmospheric Acid Deposition Fluxes

This paper presents a summary of globalacid deposition flux data taken from a globalassessment report on acid deposition prepared forUNEP/WMO (Whelpdale and Kaiser, 1996). There is a largevariation in the spacial coverage and reliability ofmonitoring around the world. Many more stationsmeasure wet deposition than collect appropriate datafor estimating dry deposition. The widespread regionswith highest precipitation concentrations anddeposition fluxes of sulphate and nitrate coincideclosely with the regions of highest density ofSO₂ and NO_x precursor emissions occurringprimarily in the mid-latitude, northern hemispherebelt where a large fraction of the worlds fossilfuels is consumed. Organic acids in precipitation makea minor contribution to acidity (<20%) inindustrial regions, but in the rest of the world theyare of same order, or even exceed, inorganic acids.Less is known about dry deposition, but it appears topredominate near strong emission sources with wetdeposition predominating farther downwind. The molarratio of the N/S contribution to acidic deposition isclose to 1.0 over large areas of Europe and NorthAmerica, but is highly variable elsewhere, beinghighest in equatorial regions due to biomass burningand lowest near smelters and other large sources of SO₂.     

中国对流层二氧化硫光化学氧化过程的数值研究

利用一个三维非静力区域大气化学输送模式与中尺度气象模式MM5相连接构成一个数值模拟系统，模拟了中国地区对流层臭氧与其前体物的分布以及二氧化硫转化为硫酸盐的过程，模式扬地面源排放、大气输送和扩散、干沉积、气相化学反应和云雨过程。结果表明：日间，O3浓度主要由NOx和NMHC的源排放和光化学反应过程支配，大气辐射是光化学反应强弱的决定因子，其强度可使SO2、O3和SO4^2-的生成浓度呈现不同的日变化和季节变化，结果表明高浓度的O3对二氧化硫转化为硫酸盐的化学过程有很大的促进作用，然而，这种作用受NMHC浓度的影响很大，较高浓度的NMHC使O3浓度上升，但同时增加了对OH等自由基的消耗，使SO2的转化率降低。     

含柠檬酸盐电镀废水的处理

对含柠檬酸盐电镀废水的几种处理方法的比较表明,氯化钡添加法能较好地使柠檬酸盐沉淀,操作简便,处理效果理想,其柠檬酸根离子的去除率达98％以上。     

中国华北地区冬季大气污染物航空测量(Ⅰ)——空中气态污染物污染特征研究

为掌握致酸大气污染物ＳＯ２ 和ＮＯｘ 的空间浓度分布，并探讨上述污染物扩散、迁移和传输规律，进而研究其在酸性降水形成过程中的作用，在“八五”期间酸性降水的研究中，针对中国华北地区城市和工业集中以及ＳＯ２ 和ＮＯｘ 等酸性大气污染物排放量大的特点，以石家庄及其以东地区为飞行区域，进行了华北地区冬季空中ＳＯ２ 和ＮＯｘ 污染特征的航空测量。通过测定发现在华北地区１－５ ｋｍ 左右的空中存在着ＳＯ２ 和ＮＯｘ 高浓度污染空域，同时ＳＯ２ 存在着高浓度汇集区     

两段接触氧化法处理生活污水的工程实例

本污水厂设计规模 70 0 0m3 d ,进水CODCr3 0 0mg L ,BOD515 0mg L ,SS 2 0 0mg L ,采用两段接触氧化法处理工艺 ,运行结果表明 ,出水水质达到GB8978 1996污水综合排放标准中的二级标准     

硫酸法钛白生产水洗工序清洁生产技术初探

通过开展水洗工段用水审计并试验了温度、偏钛酸ξ电位和漂白工艺对水洗的影响效果，从实践和理论上探讨了为其提高钛白质量改进水洗工艺的清洁生产方案的可行性和合理性。     

A/O和A2/O法除磷脱氮工艺影响因素及除磷动力学的研究

重点介绍A/O除磷工艺和A~2/O除磷脱氮工艺,以及影响除磷脱氮工艺因素和除磷动力学的研究。工艺研究采用了动态与静态实验方法,采用色质联机研究了有毒有机物的降解情况。试验结果表明,A/O、A~2/O工艺的BOD_5去除率近于二级污水处理厂,A~2/O法TP去除率近于三级污水处理厂,且去除难降解有毒有机物的效率高于传统的活性污泥法。动力学公式的修正使之更适于低碳源的情况。八种影响因素的研究为工艺的设计与运行提供了依据。