中国出口隐含碳排放影响因素研究——基于反事实法的分析

中间消耗的"消耗规模与部门构成"是影响中国出口碳排放的重要因素。基于世界投入产出数据库(WIOD)1995—2015年数据,在部门归类与形式变换基础上,本文选取"单位产出碳排放量"、"完全消耗系数"与"出口值"为中国出口隐含碳排放的影响因子,构建"因子变动—反事实构造—效果评价"分析框架,借助规模指数与结构指数对影响因子的变化动态进行描述,并通过反事实构造对"因子变动"的影响效果进行评价。研究发现:"单位产出碳排放量"规模指数单调递减,Spearman偏度系数为右偏态,说明相比于意愿产出而言,非意愿产出"碳排放量"具有内在的规模不经济;"中间消耗"规模指数与碳偏向性指数在截面上始终处于高位水平,时序上出现了显著的递增趋势,说明中国单位出口值的中间消耗量偏大,消耗投入在结构上偏向于高碳部门,与"技术前沿国"美国存在显著"技术差距";"出口值"规模指数呈现"平缓扩张——快速攀升——V型震荡"的阶段性特征,结构指数经历了以基期2002年为顶点、"先下降、后上升、再平稳"的变化轨迹,说明"出口值"作为最具弹性的影响因子,受"亚洲金融危机"、"加入世界贸易组织"与"美国次债危机"等外部冲击的影响明显,对出口碳排放的推动作用存在伸缩性与阶段性差异。从"因子变动"影响效果来看,中国产出、中间消耗与出口的部门构成具有内生关联,均显著偏向于高碳部门,对出口隐含碳排放增长产生了叠加性的"正向"扩张效应。基于此,本文认为,总量控制与结构优化的视角需从产品环节向中间消耗环节扩展,现阶段应深化要素市场改革,加速要素禀赋升级,借力要素价格机制与差别化产业规制政策,从上游环节抑制出口碳排放的输入来源。     

畜牧业“碳排放”到“碳足迹”核算方法的研究进展

全球变暖趋势日益加剧,不仅影响农业可持续发展,而且威胁到人类生存。畜牧业碳排放因其在农业碳排放中乃至全球碳排放中占比较大而日益备受关注。准确核算畜牧业碳排放是制定切实可行的碳减排政策的前提,也为我国在气候变化下承担共同但有差别的减排责任提供话语权。本文基于研究范式的演进,对畜牧业碳排放到碳足迹核算方法的研究发展进行了系统梳理,研究表明,在学者的不断研究与质疑下,畜牧业碳排放到碳足迹的核算方法经历了从OECD核算法、IPCC系数法到生命周期法与投入-产出法的演变与完善,学术界认为区域异质性、养殖规模与管理方式均影响碳足迹;散养比规模化养殖产生更多的碳排放,舍饲比户外放牧排放更多的碳。畜牧业碳足迹核算能够更加全面地反映畜牧业全生命周期的碳排放情况,但由于研究假设、研究方法及研究样本等差异导致不同区域、不同畜产品的碳排放核算结果存在不确定性。运用生命周期法和投入-产出法对欧盟成员国畜牧业碳排放的核算结果基本一致,但运用IPCC系数法和全生命周期法对中国畜牧业碳排放核算中,牛、猪和羊的碳排放量排序结果不尽一致。鉴于核算结果的差异性,本研究对不同核算方法的起源、最早采用时间、特点、局限性等方面进行了归纳总结,并建议后续研究探讨基于生命周期评价的畜牧业碳足迹研究边界的延伸性,标准化畜牧业碳排放或碳足迹核算,避免学者重复核算畜牧业碳排放,以便深入展开畜牧业碳排放其他方面的研究。     

Proposing of new building scheme and composite towards global warming mitigation for Malaysia

The building sector has been regarded as a potential sector where there is large capacity to reduce the climate change effect. This study has proposed solutions to mitigate environmental impacts and achieve low CO₂ emission from residential sector. Therefore, full life cycle assessment (LCA) has been run to assess the CO₂ emission and its effect on the atmosphere and climate change. Based on the result, timber scheme is the best choice due to releasing less CO₂ emissions to the atmosphere. However, house builders in Malaysia have almost completely neglected timber as a building material, with timber use as building components reduced to 5%. In this study, LCA Software was used to assess CO₂ emissions from different wall construction. The alternative building scheme has been made by reinforce steel stud, wooden beam and timber wall (S8) to improve the scheme deficiency while releasing less CO₂ emissions compared to other schemes. Therefore, S8 has a decreased CO₂ effect by 85% less than precast concrete frame and 90% less than brick over their lifetime. (S8) increased the load bearing compared to conventional timber beam. Thus, new scheme S8 could be replaced by current scheme and promote more adjustable scheme for Malaysian housing.     

A full-scale sequencing batch reactor system for swine wastewater treatment

A full-scale sequencing batch reactor (SBR) system was evaluated for its ability to remove carbon and nitrogen from swine wastewater. The SBR was operated on four, six-hour cycles each day, with each cycle consisting of 4.5 hours of “React,” 0.75 hours of “Settling”, 0.75 hours for “Draw” and “Fill.” Within each cycle, an amount of wastewater equivalent to about 5% of the reactor volume (5,500 litres) was removed and added. The SBR system was able to remove 82% of biochemical oxygen demand (BOD) and more than 75% of nitrogen. Even though the SBR effluent, with an average effluent BOD₅ of about 588 mg L^{? 1}, did not meet the discharge criteria, it enabled a reduction of the land base required for land application of swine wastewater by about 75%. Results indicated that the SBR system was a viable method for the treatment of swine wastewater.     

工业废水中多金属离子的吸附净化

以含有Si、Al、Ca、C元素的矿物材料作为基质,经特定条件处理后造粒成型加工成轻质多孔Si-Al-Ca-C结构的吸附材料。研究了该吸附材料对工业废水中多种金属离子的吸附性能,探讨了影响吸附性能的因素。研究结果表明,在一定条件下,Si-Al-Ca-C吸附材料对工业废水中Al3+、Ca2+、Mn2+、Cu2+、Fe3+、Mg2+、As3+和Zn2+的净化率分别高达99.34%、99.82%、98.26%、98.16%、97.76%、97.01%、100%和89.09%。金属离子残留浓度分别为0.152、0.07、0.012、0.02、0.119、0.311、0和0.259 mg/L,均低于国家污水综合排放标准(GB8978-1996)一级标准。     

不同流量分配比对多级A/O工艺去除有机物及脱氮的影响

采用三级A/O工艺分段进水工艺处理低碳源生活污水,考察了进水流量分配比对系统去除有机物、硝化反硝化能力以及去除TN的影响。通过对水质指标沿程监测结果表明,不同流量分配比(4∶3∶3,5∶3∶2,6∶3∶1)对系统去除有机物及硝化效率影响不大,出水COD、氨氮分别均在30 mg/L、1 mg/L以下。但反硝化效果受流量分配比的影响较大,在流量比为5∶3∶2时,有效利用原水中碳源进行反硝化,反硝化效果最好。在流量比为5∶3∶2的情况下,TN出水为5.7 mg/L去除率为82.9%,优于流量分配比为6∶3∶1和4∶3∶3时的脱氮效果。总体而言,分段进水工艺在对碳源的有效利用及能耗节省方面优于单点进水。     

油田压裂返排液处理技术实验研究

油气井压裂作业过程中产生的压裂返排液已成为当前油田水体的主要污染源之一。文章对吉林油田公司压裂返排液处理工艺进行了实验研究。结果表明:在采用絮凝、微波强氧化、活性炭毡处理、纳滤/反渗透集成处理工艺后,压裂返排液CODCr可以达到GB 8978-1996《污水综合排放标准》一级标准要求。该研究为压裂返排液处理装置的设计和现场实施提供了实验基础。     

秦皇岛市商业低碳化研究

2001—2010年秦皇岛市商业行业碳排放量分析结果显示,秦皇岛商业行业碳排放不论从总量还是排放强度均呈现增加趋势。通过剖析商业低碳化的制约因素,对秦皇岛市商业低碳化发展提出了相关建议：商业企业应积极进行内部治理,控制商业建筑的碳排放并合理选择供应商;发挥政府的主导作用,为低碳商业的发展提供良好的外部环境;合理规划商业产业与商业网点布局,积极引导、促进商业领域低碳技术的使用和发展;建立低碳商业发展专项资金,为中小型商业企业提供资金支持;加强对低碳消费的引导力度。     

Sorption of PAHs and PCBs to activated carbon: coal versus biomass-based quality

The addition of activated carbon (AC) is an increasingly popular method for pollutant immobilization, and the AC material can be made of biomass or coal/fossil feedstock. The aim of the present study was to investigate whether there are differences between pollutant sorption to biomass and coal-based AC in the presence and absence of sediment. Through N₂ and CO₂ adsorption to probe surface area and pore size it was shown that the biomass-based AC had a stronger dominance of narrow pores in the size range 3.5-15 Å than the anthracite-based material. In the absence of sediment, sorption isotherms for the probe compounds pyrene and PCB-101 showed stronger sorption for the biomass-based AC (logarithmic Freundlich coefficients 8.15 for pyrene; 9.91 for PCB-101) than for the anthracite-based one (logarithmic Freundlich coefficients 7.20 and 9.70, respectively). In the presence of sediment, the opposite trend was observed, with the stronger sorption for anthracite-based AC. Thus, the presence of competing and/or pore-blocking sediment constituents reduces sorption to a larger extent for biomass-derived AC (factor of 5 for pyrene to almost 100 for PCB-101) than for anthracite-based AC (no reduction for pyrene to factor of 5 for PCB-101). This difference is tentatively attributed to the difference in pore size distribution, narrow pores being more prone to clogging, and could have implications for remediation feasibility with AC from different sources.     

Visualization and localization of bromotoluene distribution in Hedera helix using NanoSIMS

Some plants are known as indoor air purifiers. A large number of studies report kinetic purification results for an extensive panel of plants, i.e. the pollutant concentration (volatile organic compounds, as known as VOC, most of the time) is continuously monitored by gas chromatography. However, only a few papers describe the mechanisms involved in such processes. This study deals with the use of secondary ion mass spectrometry imaging as an efficient tool to locate atmospheric pollutant as bromotoluene within the Hedera helix plant (leaf, roots) and the substrate on which it was previously grown. Hedera helix plants have been placed in a pollution chamber with control of the exposure parameters. Plant and soil samples excised were transferred into a fixative solution of glutaraldehyde and paraformaldehyde for a few days, were dehydrated using ethanol and were embedded with resin. Cross sections were made from the pale brown solids obtained. Then, a device using a cathodic pulverization device capable of depositing a few nanometers of gold atoms over the sample was used to make the surface electronically conductive for the NanoSIMS. Hence, polluted and unpolluted samples of Hedera helix and substrates were obtained following a careful procedure that allowed for the discrimination between polluted and nonpolluted ones. Nanoscale spatial resolution was an invaluable tool (NanoSIMS) to achieve this, and proved that VOCs, such as bromotoluene, were actually trapped by plants such as Hedera helix.