聚硫醚纤维素对持久性污染物的吸附特性

棉纤维在碱存在下与环硫氯丙烷发生醚化反应,合成了一种新型环境功能材料--聚硫醚纤维素(PTCC),并研究了PTCC的理化性能及其对持久性污染物的吸附性能.结果显示,PTCC化学性质比其它含硫纤维素衍生物稳定,抗氧化和抗紫外照射能力均优于其它含硫纤维素.暴露于空气中1个月,其含硫量保持不变;室温下,中性水溶液中浸泡5d,其水解百分率小于2%.PTCC对重金属离子和阳离子有机物具有很强的吸附作用,其饱和吸附容量分别为:Hg2+364 mg·g-1、Ag+291 mg·g-1、氯化十六烷基吡啶219 mg·g-1、阳离子红X-GRL 321 mg·g-1、维多利亚艳蓝B0 373mg·g-1.常见的共存离子对于PTCC的吸附容量没有明显的影响.PTCC对污染物的吸附过程符合Langmuir等温吸附方程和二级吸附动力学方程,吸附符合单分子层吸附理论.吸附Hg2+、Ag+后的聚硫醚纤维素用氨水洗脱,再生后可以循环利用.PTCC是一种性能优良的新型环境功能材料,具有很好的应用前景.     

Combination e ect of pH and acetate on enzymatic cellulose hydrolysis

The productivity and e ciency of cellulase are significant in cellulose hydrolysis. With the accumulation of volatile fatty acids (VFAs), the pH value in anaerobic digestion system is reduced. Therefore, this study will find out how the pH and the amount of acetate influence the enzymatic hydrolysis of cellulose. The e ects of pH and acetate on cellulase produced from Bacillus coagulans were studied at various pH 5–8, and acetate concentrations (0–60 mmol/L). A batch kinetic model for enzymatic cellulose hydrolysis was constructed from experimental data and performed. The base hypothesis was as follows: the rates of enzymatic cellulose hydrolysis rely on pH and acetate concentration. The results showed that the suitable pH range for cellulase production and cellulose hydrolysis (represents e ciency of cellulase) was 2.6–7.5, and 5.3–8.3, respectively. Moreover, acetate in the culture medium had an e ect on cellulase production (KI = 49.50 mmol/L, n = 1.7) less than cellulose hydrolysis (KI = 37.85 mmol/L, n = 2.0). The results indicated that both the pH of suspension and acidogenic products influence the enzymatic hydrolysis of cellulose in an anaerobic environment. To enhance the cellulose hydrolysis rate, the accumulated acetate concentration should be lower than 25 mmol/L, and pH should be maintained at 7.     

堆肥嗜热纤维素分解菌的筛选鉴定及其强化堆肥研究

对采集于农业堆肥高温期的微生物样品进行30d的高温驯化,驯化完成后从中筛选得到15株嗜热纤维素分解菌,经形态学特征、生理生化反应及16S rDNA序列同源性比对鉴定为:Bacillus sp3株,Paenibacillus sp1株,Bacillus licheniformis3株,Bacillus subtilis4株,Brevibacillus borstelensis1株,Bacillus coagulans3株.将筛选得到的菌种添加至高纤维素含量的堆体进行效果验证,结果表明添加嗜热纤维素分解菌对堆肥pH变化无显著影响,但可提高堆肥高温期温度、延长高温期并显著地降低堆肥产品的C/N和有机质含量,显著降低纤维素和半纤维素含量,加快堆肥腐熟.堆体有机质降解动力学结果表明,堆体接菌和不接菌处理的有机质最大降解度分别为62.5481%和61.7101%,速率常数分别为0.1250d-1和0.1051d-1,接菌处理的堆肥比对照堆肥提前6d达到稳定.研究表明,添加筛选的嗜热纤维素分解菌能缩短堆肥周期.     

热纤维梭菌不同菌株的纤维素降解和酒精生产能力

以高温厌氧细菌热纤维梭菌(Clostridium thermocellum LQRI和VPI菌株)和嗜热厌氧乙醇菌(Thermoanaerobacterethanolicus X514和39E菌株)为对象,以不同浓度纤维素为底物,分析了热纤维梭菌不同菌株的纤维素降解和酒精生产能力.结果表明,在热纤维梭菌纯培养体系中,LQRI对纤维素的降解能力明显高于VPI,前者约为后者的1.2倍,但两者的酒精生产能力没有显著差异,LQRI在1%纤维素条件下酒精终浓度约为12 mmol/L,VPI约为10 mmol/L.随着底物纤维素浓度的增加(1%、2%、5%),两者对纤维素降解和酒精生产能力均呈明显下降趋势.在热纤维梭菌和嗜热厌氧乙醇菌混合培养体系中,LQRI对纤维素的降解能力明显高于VPI,前者约为后者的1.28～1.58倍.随着底物浓度的增加,两者的纤维素降解率均逐渐下降,但热纤维梭菌对纤维素降解的绝对数值还受到其它混合培养菌种的影响.此外,LQRI+Thermoanaerobacter混合培养体系的酒精生产能力明显高于VPI+Thermoanaerobacter,前者约为后者的1.27～1.77倍.随着底物浓度的增加,混合培养体系酒精生产能力没有明显下降趋势.     

胞外多聚物对酶催化污泥厌氧水解的影响研究

研究了胞外多聚物对酶催化污泥溶解效果和催化过程中污泥化学组分变化的影响.向原污泥及去除胞外多聚物的剩余污泥外加酶,并与未加酶组水解效果进行对比.结果表明,酶浓度〈20 mg/g时仅水解污泥胞外物质,加大酶量能显著引起污泥破解.溶菌酶用于原污泥水解效果较好,SCOD/TCOD最高可达28.14%,投加量60 mg/g,反...     

碱处理对玉米秸秆纤维素结构的影响

介绍了在高固含率条件下氢氧化钠(NaOH)和氢氧化钙(Ca(OH))2堆沤处理对玉米秸纤维素结构的影响。分别用2.5%、5%和7.5%(ρ)的NaOH和Ca(OH)2将玉米秸在常温下堆沤处理3 d后,提取其纤维素,采用傅立叶变换红外光谱(FTIR)和X射线衍射光谱(XRD)对比研究了处理前后纤维素的结构和结晶度的变化。结果表明碱堆沤处理使玉米秸秆中纤维素的形态结构发生了变化,部分分子间氢键断裂,部分酯键消失,随着碱用量的增加,纤维素结构被破坏的程度越大;纤维素的晶体类型与002面微晶位置虽然没有改变,但是纤维素的结晶度与002面微晶尺寸增大。这些变化表明碱处理能提高玉米秸秆纤维素的可及度和反应性,从而改善厌氧消化性能。其中NaOH较Ca(OH)2表现出更好的纤维素润胀能力和反应性,在处理秸秆提高其厌氧消化产甲烷性能上具有更大的潜力。     

Adsorption of phosphate ions from water using a novel cellulose-based adsorbent

A novel cellulose-based adsorbent, iron(III)-coordinated amino-functionalised poly(glycidylmethacrylate)-grafted cellulose [Fe(III)–AM-PGMACell] was developed for the removal of phosphate from water and wastewater. The scanning electron micrograph showed that AM-PGMACell has a rougher surface than cellulose and the adsorption of Fe(III) on AM-PGMACell made the surface even rougher. Infrared spectroscopy revealed that amino groups on the surface of AM-PGMACell complexed with Fe(III) played an important role in the removal of phosphate from solutions. X-Ray diffraction patterns showed a decrease in crystallinity after graft copolymerisation onto cellulose. The effects of contact time, initial sorbate concentration, pH, agitation speed, dose of adsorbent and temperature on the removal process were investigated. Maximum removal of 99.1% was observed for an initial concentration of 25 mg·L ^?1 at pH 6.0 and an adsorbent dose of 2.0 g·L ^?1. A two-step pseudo-first-order kinetic model and Sips isotherm model represented the measured data very well. Complete removal of 11.6 mg·L ^?1 phosphate from fertiliser industry wastewater was achieved by 1.6 g·L ^?1 Fe(III)–AM-PGMACell. The adsorbent exhibited very high reusability for several cycles. Overall, the study demonstrated that Fe(III)–AM-PGMACell can be used as an efficient adsorbent for the removal and recovery of phosphate from water and wastewater.     

Photochemical reactions of musk ketone

The photolysis of musk ketone in cyclohexane and methanol afforded several cyclization products while the product spectrum in cyclohexene and squalene was characterized by an amino derivative and a ring expansion product, respectively. On cellulose stearate layers the photochemical reactions of musk ketone proceeded readily both under sun simulator and in natural sunlight and several photoproducts identified in solvent experiments were detected. Photoproducts were isolated by preparative HPLC and TLC and analyzed by means of HPLC, GC/MS, MS, LC/MS, ¹H‐ and ¹³C‐NMR.     

PBS共聚物对蚯蚓的蛋白质含量和纤维素酶活性的影响

以赤子爱胜蚓Eisennia foetida为研究对象,在滤纸接触法的基础上,采用自然土壤法进行急性毒性试验,研究了不同相对分子质量的PBS-co-PCL共聚物对蚯蚓蛋白质含量和纤维素酶活性的毒性效应。研究结果表明：随着暴露时间的增长,蚯蚓蛋白质含量呈现先增加后减小的趋势;第7天时,数均相对分子质量（Mn）为8.0×103的聚合物对蛋白质的影响较明显;第14天时,相对分子质量（Mn）为1.6×104和2.8×104的聚合物对蛋白质的影响较明显。聚合物相对分子质量（Mn）为8.0×103处理组中,纤维素酶活性受到的抑制作用较明显,聚合物含量为2.5%时,抑制作用达到最大。但是随着暴露时间的增长,这种抑制作用逐渐减小,即影响是暂时性的,纤维素酶活性变化比蛋白质含量变化更敏感。以上结果表明蚯蚓在实验过程中没有出现致病或致死现象,即聚合物对蚯蚓的影响较小。     

Functional Properties of Extruded Acetylated Starch-Cellulose Foams

Acetylated starches, with degrees of substitution (DS) of 2, 2.5 and 3, were blended with 3%, 7.5% and 12% -cellulose and 14%, 17% or 20% (d.b.) ethanol and twin-screw extruded at 165°C barrel temperature and 225 rpm screw speed. A response surface methodology experimental design was applied to the sub-plot and a completely randomized design to the whole plot design to test the differences among the acetylated starches and the effects of cellulose and ethanol. DS, cellulose and ethanol contents significantly affected the functional properties and specific mechanical energy requirement. DS had positive effects on radial expansion ratio (RER), compressibility and specific mechanical energy requirement and a negative effect on bulk density. Highest (RER) was obtained from 20% ethanol content. Extrudates containing 12% cellulose had the highest bulk density and the highest compressibility. Higher cellulose contents required more specific mechanical energy.