Heterostructure CdS/ZnS nanoparticles as a visible light-driven photocatalyst for hydrogen generation from water

(CdS)_x/(ZnS)_1–x nanoparticles were synthesized as a visible light-driven photocatalyst using the stepped microemulsion technique with a series of the ratio factors (x). The photocatalytic test results showed that (CdS)_x/(ZnS)_1-x with x = 0.8 had the highest photo-reactivity for H₂ production from water under visible light. The composite (CdS)_0.8/(ZnS)_0.2 catalyst had a heterogeneous structure that exhibited a much greater photocatalytic hydrogen production activity than either pure CdS or the homogeneous Cd_0.8Zn_0.2S solid solution. ZnS deposition also was shown to largely improve the stability of CdS in the heterostructured CdS/ZnS catalyst. Thermal treatment of the catalyst, i.e., annealing (CdS)_0.8/(ZnS)_0.2 at 723 K, improved the crystallinity of the catalyst and increased its photocatalytic H₂ production rate by more than 36 times. Deposition of Ru on the surface of the catalyst particles by in situ photo-deposition further increased the photo-H₂ generation rate by 3 times. The photocatalyst of 0.5%Ru/CdS/ZnS achieved the highest H₂ production activity, at a rate of 12650 μmol/g-h and with a light to hydrogen energy conversion efficiency of 6.5%.     

几种涂层氙弧灯光老化试验加速性研究

太阳辐射是引起有机材料老化的最主要原因,实验室氙弧灯光老化试验具有较高的加速性。本文通过对有机涂层在广州试验站自然暴露试验结果以及实验室氙弧灯光老化试验结果进行对比研究,得到3种常用有机防护涂层的加速倍数,对于1#、2#样品的加速倍数为9,3#样品的加速倍数为6。     

Studies on the use of low-volatile non-edible oils in a thermal barrier-coated diesel engine

Owing to the ever-increasing vehicle population, the consumption of diesel fuel in the transportation, agricultural and industrial sectors has increased at an alarming rate. This has led to rapid fossil fuel depletion, ozone depletion and environmental degradation, which have become a serious concern. Search for alternative renewable and clean energy fuel sources to mitigate the emissions of greenhouse gases is continuing, and attempts to find different techniques for efficient utilization of these fuels are also undertaken. Biodiesel being an oxygenated fuel obtained from vegetable oils has received greater attention over the years as a promising alternative to diesel fuel. However, vegetable oils exhibit high viscosity, poor volatility and poor cold-flow characteristics. These characteristics can cause the following problems in the engine when run for a longer duration: injector coking, severe engine deposits, filter gumming, piston ring sticking and thickening of lubrication. These problems can be eliminated or minimized by adopting suitable fuel processing techniques to obtain biodiesels from vegetable oils. The fuel processing techniques vary widely, which include transesterification, supercritical methanolysis, ultrasonic and continuous microwave-assisted transesterification methods. In the present study, the transesterification method is effectively used to obtain biodiesels from non-edible oils of honne and cotton seed. The biodiesels obtained from these oils were used in the unmodified diesel engine to check their feasibility as diesel engine alternatives. Different thermal barrier coatings (TBCs) were applied on the piston, cylinder head, and inlet and exhaust valve surfaces of the diesel engine in order to make it a fully adiabatic engine. The engine with such TBCs is called a low heat rejection engine. For the present study, the TBC of partially stabilized zirconia (PSZ) and aluminium oxide (Al₂O₃) were selected. Finally, the performance of the diesel engine fuelled with different biodiesels in both conventional and thermal barrier-coated modes was compared. The thermal barrier-coated engine with the PSZ version showed better performance with increased nitric oxide emissions when compared with the Al₂O₃ coating.     

热喷涂防腐涂层在生物质锅炉中的研究进展

简要介绍了常用热喷涂技术,基于对热喷涂防腐涂层在燃煤锅炉防腐工作中的研究进展,进一步分析了热喷涂涂层在生物质锅炉防腐中的现状,介绍了金属涂层中的NiCrTiFe系列涂层、陶瓷涂层及金属陶瓷复合涂层、纳米涂层等现有技术比较成熟的涂层,对热喷涂防腐涂层的发展趋势进行了展望。     

TiO2镀膜电极光电催化降解酸性紫红

采用溶胶-凝胶法在钛片上涂覆TiO2薄膜为电极,自行设计组装光电催化反应器,对酸性紫红染料废水进行光电脱色处理,探讨了光电反应的协同性并研究了初始染料浓度、电压、pH和电解质浓度对脱色反应的影响。结果表明,光化学催化和电化学氧化具有协同效应,单一紫外光催化和单一电催化酸性紫红的脱色率分别为44.27%和13.12%,而光电催化(紫外、外加电压10 V)的脱色率达到77.18%。初始浓度较低、电压适中、pH偏碱性时,酸性紫红废水脱色率较高;电解质对脱色反应有促进作用,且浓度越高,酸性紫红脱色率越高。     

水分和NG迁移对分子筛改性包覆层性能的影响

包覆层的贮存时间和它与推进剂粘结的完整性对于发动机工作的可靠性来说是非常重要的.而水分是影响其贮存的一个重要因素,NG迁移则和包覆层与推进剂的粘结具有密切关系.将分子筛添加于包覆层中,可以很好的提高包覆层的力学性能.通过研究水分和NG迁移对包覆层性能的影响发现,加入分子筛后制得的包覆层吸水后力学性能基本无变化,并具有良好的抗NG迁移能力.     

Preparations of TiO2 film coated on foam nickel substrate by sol-gel processes and its photocatalytic activity for degradation of acetaldehyde

Anatase TiO2 films were successfully prepared on foam nickel substrates by sol-gel technique using tetrabutyl titanate as precursor. The characteristics of the TiO2 films were investigated by XPS, XRD, FE-SEM, TEM and UV-Vis absorption spectra. The photocatalytic activities of TiO2 films were investigated by photocatalytic degradation reactions of gaseous acetaldehyde, an indoor pollutant, under ultraviolet light irradiation. It was found that Ni^2＋ doping into TiO2 films due to the foam nickel substrates resulted in the extension of absorption edges of TiO2 films from UV region to visible light region. The pre-heating for foam nickel substrates resulted in the formation of NiO layer, which prevented effectively the injection of photogenerated electrons from TiO2 films to metal nickel. The TiO2 films displayed high photocatalytic activity for the degradation of acetaldehyde, and were enhanced by calcining the substrates and coating TiO2 films repeatedly. The high activity was mainly attributed to the improvement of the characteristics of substrate surface and the increase of active sites on photocatalyst.     

AlCrSiN/AlCrN/AlCrON/AlCrN多层复合涂层的研究

目的 解决硬质合金刀具高速干切削难加工材料面临效率低、寿命短的难题,提升刀具涂层的耐热能力,在AlCrSiN涂层中周期性植入AlCrON热屏障层,并在其两侧沉积AlCrN层进行包夹,改善含氧层的韧性,既能保持涂层刀具较高的强度,又能改善其耐热能力.方法 采用全自动电弧离子镀膜机,研制具有不同调制周期的AlCrSiN/A...     

民用飞机防护体系加速试验谱研究

指出了民用飞机日历寿命的首翻期主要由飞机防护体系使用期限决定,分析了民用飞机防护体系失效机制和民用飞机防护体系腐蚀加速试验谱需要考虑的因素,提出了民用飞机防护体系腐蚀加速试验谱的基本构成,并给出了我国沿海湿热地区加速试验谱的具体条件和时间。     

2024-T62铝合金涂层外场腐蚀环境下电化学性能研究

目的评估自然暴露条件下涂层的耐蚀性能。方法选取西沙热带海洋环境作为自然暴晒场,开展2024-T62铝合金涂层(N1和N2)在湿热暴露、紫外照射、盐雾等综合腐蚀环境下的外场暴晒试验,利用电化学测试方法对暴晒后涂层在3.5%Na Cl溶液中浸泡不同时间的耐蚀性能进行研究。结果铝合金涂层外场暴晒试验后,电化学阻抗值下降,综合腐蚀环境具有显明的加速作用。随着在3.5%Na Cl溶液的浸泡时间增加,C_(coat)-T值不断增大,Rcoat值不断减小。结论 N1铝合金涂层暴晒件电化学阻抗值较高,具有较强的耐蚀性能。