Application of CFD on the sensitivity analyses of some parameters of the modified Hartmann tube

The aim of this work is to determine the influence of operating parameters such as the dispersion pressure, the ignition delay and height on the dust flammability. A Computational Fluid Dynamics (CFD) simulation, based on an Euler–Lagrange approach, was developed with Ansys Fluent™ and validated experimentally. Such analysis will facilitate the choice of the most conservative conditions for a flammability test. This paper is focused on a case study performed on wheat starch with the modified Hartmann tube. The dispersion process of the powder was studied with granulometric analyses performed in situ and high speed videos. Tests were performed with injections at gas pressure ranging from 3 to 6 bars and the evolution of the particle size distribution (PSD) was recorded at different ignition heights (5, 10 and 15 cm over the dispersion nozzle). The observations highlighted the presence of agglomeration/deagglomeration processes and dust segregation. Besides, a CFD simulation analysis was aimed at evaluating the impact of a set of parameters on the PSD and the local turbulence, which are closely linked to some flammability parameters. For this computational analysis, the CFD simulation was coupled with a collision treatment based on a Discrete Element Method (DEM) in order to consider the cohesive behavior of the combustible dust. Thus the results suggest performing the injection of the gases at approximately 5 bars for the flammability tests of wheat starch in order to obtain the finest PSD at a given ignition height. It is also shown that the finest PSD are obtained at 5 cm over the dispersion nozzle. However, the local instabilities and turbulence levels are so high during the first stages of the dispersion that the flame growth can be disturbed for short ignition delays. Moreover, the stabilization of the bulk of the dust cloud requires longer periods of time when the ignition sources are located at 15 cm. As a result, the recommended height to perform a flammability test is 10 cm in this case. Finally, this study proposes some tools that might improve the procedure of dust flammability testing.     

基于生活垃圾分类的厨余垃圾采样方法研究

与复杂的混合生活垃圾相比,厨余垃圾成分较单一,需要针对性的采样方法.本研究基于生活垃圾分类背景,在《生活垃圾采样和分析方法》(CJ/T 313—2009)的基础上,就采样位点和采样节点数对分类存放的厨余垃圾采样的影响展开研究.研究结果表明,仅采集垃圾桶中间位点的样品不具有代表性,不同情景应有不同的采样策略.当厨余垃圾流节点数少于2时需采集所有节点,当厨余垃圾流节点数为3~7时需采集2个节点,而当厨余垃圾节点数为8~18时需采集3个节点,均少于CJ/T 313—2009中要求的采样节点数.厨余垃圾的总量增大,则其最少采样节点数相应上升,但最少采样点受到厨余垃圾流节点数的制约.     

赤潮灾害经济损失评估技术方法

为有效应对赤潮灾害防灾减灾、灾后救援及管理的需求,在综合分析前人提出的赤潮灾害损失评估技术方法的基础上,参考赤潮灾害对受灾体的危害特点,结合实际工作的需求及在实际中可获取的业务数据,提出了赤潮灾害经济损失评估指标体系;根据灾害经济学理论,借鉴其他自然灾害经济损失评估的先进思想,采用市场价格法,分别建立了包括海水养殖业经济损失、滨海旅游业经济损失、赤潮灾害业务与应急监测费用和赤潮灾害处置费用的赤潮灾害经济损失评估模型;最后,提出了赤潮灾害损失评估的技术流程。     

基于水域面积法的山区河流水电站下游生态流量定值研究

水电站的大量兴建导致下游河道萎缩退化甚至断流,如何改变水电站运行调度方式,维持下游河道一定的生态流量、保障河流健康成为国内外普遍关注的问题.本文在传统水文学方法的基础上融入生物栖息地法思想,以河流生态系统的生物多样性为功能目标,用河道流量反映河流的水文过程,河道水域面积反映河流生态系统的生物多样性,创新性地提出考虑河道水文生态特性的生态流量定值方法——水域面积法.以北江上游浈江二级支流罗坝水为例进行分析计算.计算结果表明:枯水年罗坝水生态流量为2.26 m3·s-1,占多年平均流量的25.97%;平水年生态流量分月控制,生态流量过程与建站前流量过程基本一致.根据枯水年的生态流量值和平水年各月份的生态流量值,结合水电站的运行调度规则,换算成一定时期内的径流量来确定该时期内水电站需释放的水量,进而对水电站下游河道的生态功能进行保护和修复.     

Applying a new method for direct collection, volume quantification and determination of N2 emission from water

The emission of N₂ is important to remove excess N from lakes, ponds, and wetlands. To investigate the gas emission from water, Gao et al. (2013) developed a new method using a bubble trap device to collect gas samples from waters. However, the determination accuracy of sampling volume and gas component concentration was still debatable. In this study, the method was optimized for in situ sampling, accurate volume measurement and direct injection to a gas chromatograph for the analysis of N₂ and other gases. By the optimized new method, the recovery rate for N₂ was 100.28% on average; the mean coefficient of determination (R²) was 0.9997; the limit of detection was 0.02%. We further assessed the effects of the new method, bottle full of water, vs. vacuum bag and vacuum vial methods, on variations of N₂ concentration as influenced by sample storage times of 1, 2, 3, 5, and 7 days at constant temperature of 15°C, using indices of averaged relative peak area (%) in comparison with the averaged relative peak area of each method at 0 day. The indices of the bottle full of water method were the lowest (99.5%-108.5%) compared to the indices of vacuum bag and vacuum vial methods (119%-217%). Meanwhile, the gas chromatograph determination of other gas components (O₂, CH₄, and N₂O) was also accurate. The new method was an alternative way to investigate N₂ released from various kinds of aquatic ecosystems.     

大气颗粒物PM_(2.5)监测技术研究进展及展望

大气颗粒物已经成为中国的首要大气污染物,其中PM2.5污染越来越受到政府和相关部门关注,本文综述了国内外对大气颗粒物PM2.5的几种监测方法的研究进展,重点比较了各种监测方法的优缺点,并通过实例对比说明了β-射线法的可靠性及用膜片反演方法提高精确度的可行性,同时就加强国内PM2.5监测技术研究提出相关建议及展望。     

景观生态学方法在生态环境影响评价中的应用研究

采用《环境影响评价技术导则非污染生态影响》(HJ/T 19-1997)推荐的景观生态学评价方法,应用景观生态学的基本原理,通过对景观多样性指数、景观优势度和人工干扰指数等3类景观格局指数的计算及对比,从景观空间结构、异质性、恢复能力等方面,预测建设项目实施对生态环境的影响程度,并提出工程项目建设应注意的问题和采取的措施.     

生态文明建设实现合作治理的条件、主体和路径分析研究

生态文明建设是政府、市场、非政府组织和公民等多元主体合作治理的整体性系统性实践活动,多元主体合作治理的实现依赖于制度环境、组织因素、共同目标和信息沟通等多个关键条件,同时,合作治理需要各主体按照生态文明建设的要求明确和重塑角色定位,进而通过健全多元主体参与生态文明建设法律保障体系,健全生态补偿和生态支出竞争使用机制,建立信息交互制度,寻求多元合作模式,最终实现统筹协调、联动增效的生态文明建设合作治理.     

固定源细颗粒物稀释测试法现场应用存在问题及影响因素分析研究

对基于大气环境的稀释测试法在现场应用中存在的主要问题进行了归纳总结,并对若干影响细颗粒物测试结果的重要因素进行了分析,诸如停留时间、稀释比、采样时间等因素,期望能够对该法测试系统的后续改进或重新设计提供实际问题导向,同时也能够对该领域现场工作的科研人员提供非常有用的经验。     

基于变更平衡表的土地利用演化信息提取与预测方法研究——以苏州市为例

变更平衡表为国土资源管理部门历年实地调查、汇总所得,精度高,目前的研究中对其深入的应用较少,基于变更平衡表的应用方法研究可为区域土地利用演变信息提取与预测提供帮助。推导了由连续年份的年度变更平衡表求多年周期的平衡表的方法,提出了基于土地利用综合动态度分析土地利用有序程度的思路,探讨了利用连续年份的变更平衡表预测任意年份土地利用结构的方法,并基于传统方法进行了改进,提出了利用矩阵开方法求预测概率矩阵。应用苏州市一定时期的连续年份的年度变更平衡表对上述方法进行了验证,结果表明:提出的信息提取方法有效,预测结果可信;在分析期内(1998~2008年),苏州市耕地大量减少的去向是各类建设用地增加的来源,区域土地利用有序程度较高;预测显示至2020年土地利用结构变化仍将维持农用地、耕地不断减少和建设用地总量不断增加的趋势,但转化的速率将有所放缓;对变更平衡表的深入应用有一定的借鉴意义。