Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

光催化技术降解水中环境药物的研究进展

环境水体中检测到大量药物的存在,主要包括抗生素,抗惊厥抗抑郁药物,解热和非甾体消炎药,血脂调整剂,β-阻滞剂等。传统的水处理技术并不能有效地去除这些药物,存在于水体中的环境药物对公共健康的潜在危害引起了广泛的关注。文中简要地介绍了近年来光催化技术在降解环境药物动力学和机理方面的研究进展,试图找出水体中环境药物降解的一般规律,为环境水体中该类物质的迁移和转化提供理论依据。     

农药含钾废渣的热解动力学

通过XRF和XRD两种测试方法对农药含钾废渣的成分进行测定,结果显示,该废渣中含有大量的氯化钾,具有很大的资源化价值.采用热重分析法,在5、10、15、20 K.min-1线性升温速率下,研究了农药含钾废渣在空气气氛下的热解特性及热解动力学.以期为农药含钾废渣的资源化处理提供理论依据.结果表明,该废渣热解过程分为3个阶段,失重率分别为4.62%、7.69%和2.55%;且3个阶段的活化能E分别为83.53、128.48和138.17 kJ.mol-1,指前因子A分别为4.79×107、2.34×1010和6.46×107s-1.     

环境样品中痕量锰的催化动力学测定法

对环境样品中痕量锰的催化动力学测定方法进行简要评述，引述文献１６篇。     

Photochemical behaviour of musk tibetene

BACKGROUND: Synthetic musk compounds are widely used as additives in personal care and household products. The photochemical degradation of musk tibetene in aqueous solutions or in acetonitrile/water mixtures under different conditions was studied in order to assess its environmental fate. METHODS: Musk tibetene dissolved (or suspended) in water and/or acetonitrile/water mixtures was irradiated at different times by UV-light and by solar light. The irradiation mixtures were analyzed by NMR and TLC. The photoproducts formed were identified by GC-MS and NMR data. RESULTS: The experimental results indicated that musk tibetene was photodegradable in water or acetonitrile/water mixtures with half-life reaction times close to 20 minutes. The irradiation mixtures were separated by chromatographic techniques yielding three photoproducts (3,3,5,6,7-pentamethyl-4-nitro-3H-indole, 3,3,5,6,7-pentamethyl-4-nitro-1H-indoline and 3,3,5,6,7-pentamethyl-4-nitro-3H-indolinone) identified by means of spectroscopic analysis. DISCUSSION: The numerical modelling of the photodegradation concentration-time profiles gave (8.13 +/- 0.15) x 10(-2) and (1.34 +/- 0.04) x 10(-2) mol/E for the overall primary quantum yield of direct photolysis for musk tibetene and the major intermediate (3,3,5,6,7-pentamethyl-4-nitro-3H-indolinone), respectively, in the wavelength range 305-366 nm. The half-life times of photodegradation of the both substances varied from 1-1.5 hours at 20 degrees N during the summer season to 6-10 hours for highest latitudes in winter. CONCLUSIONS: Under solar light, musk tibetene was photolabile in acetonitrile and acetonitrile/water 1/1, while it was slowly degraded when suspended in water. In all media, musk tibetene was photodegraded into three photoproducts. By using a kinetic model, the overall primary quantum yields of direct photolysis of musk tibetene and its main photoproduct, in the wavelength range 305-366 nm, were estimated, indicating that the photodegradation rate for musk tibetene is faster than the photolysis rate of the major by-product. RECOMMENDATIONS AND PERSPECTIVES: The results indicate that, in order to assess the environmental impact of musk tibetene on the aquatic ecosystem, great attention should be focused on the major photoproduct which is proved to be more persistent than the parent compound under light irradiation. The predicted half-life times of direct photolysis for both substances ranged from 1-1.5 hours at 20 degrees N during the summer season to about 6-10 hours for highest latitudes in winter, indicating that, from a photochemical point of view, the environmental persistence of these substances increases by increasing the latitudes and during the cold seasons, making more realistic an intake of these xenobiotic molecules into the food chain of aquatic living organisms. Tanabe reports in his Editorial (Tanabe 2005) that "It is necessary to have knowledge of the global picture of synthetic musk pathways. So, it is conceivable that now is the time to study the transport, persistency, distribution, bioaccumulation and toxic potential of this new environmental menace on a global scale, especially in developing countries". Therefore, the future environmental analysis and investigations on the eco-toxicity of nitro musk compounds should take into account not only the presence of the parent compounds but also their photochemical intermediates or end-by-products.     

山梨酸废水在ABR中的基质降解行为

稳态条件下,采用厌氧折流板反应器(anaerobic baffled reactor,ABR)处理山梨酸废水并进行基质降解动力学研究.实验表明,在污泥负荷为0.54～1.63 kg COD/(kg VSS·d)的范围内,COD去除率随着负荷的增加从85%降到55%.各隔室出水COD沿程递减,前3个隔室承担了去除COD的重要作用,但随着污泥负荷的增加,后部承担的COD去除率比例增大.基于各串联隔室完全混合的假定,推导ABR中山梨酸废水的基质降解动力学方程,并通过实验确定相关动力学参数及相应的动力学方程.实测值与预测值基本吻合.     

亲水性多孔载体在流化床中的生物膜形成过程分析

采用实验制备的一种新型亲水性多孔聚合物作为流化床反应器中生物膜附着生长的载体,实现流态化水力条件下的生物挂膜过程.在3个结构尺寸相同的流化床反应器中考察了接种污泥浓度、进水有机负荷及载体粒径对亲水性多孔载体生物挂膜量的影响,试验结果表明,接种污泥浓度为30 g VSS/L、进水TOC值为350 mg/L、载体粒径为5～8 mm时载体表面的附着生物量最大,反应器运行12 d的载体附着生物量达到4.45 g VSS/L,膜结构稳定,表现出较活性污泥法更高的活性.在进水TOC、氨氮浓度分别为350 ms/L、50 mg/L,HRT为6 h的情况下,两者的去除率分别达到了97.1%和64.3%,表明载体上的生物膜对污水中TOC及氨氮的去除表现出高效率.挂膜后载体表面上的微生物以丝状菌为主,孔壁上的微生物以球菌和杆菌为主要生物相,证明载体内外表面皆适宜微生物的生长,并且形成合理的生物相分布.     

针铁矿纤铁矿催化降解苯酚动力学速率及其反应产物研究

研究了针铁矿和纤铁矿在过氧化氢参与下对苯酚的催化降解的动力学速率与溶液pH关系,并用紫外吸收谱测定其反应产物的谱学特征,发现纤铁矿反应体系降解苯酚的速率大于针铁矿反应体系,其中又以pH=3.8的纤铁矿体系反应速率常数最大。当溶液pH=3～4时,苯酚可被完全降解,并有40%～60%有机碳(TOC)被矿化。当溶液pH=4～5时,苯酚可被转化为多酚类化合物,但基本上不被矿化。当溶液pH>5时,苯酚没有发生明显的转化和矿化。     

2种水稻土中Cu(Ⅱ)和Pb(Ⅱ)的解吸动力学

用一次平衡法研究了2种水稻土表面吸附态Cu(Ⅱ)和Pb(Ⅱ)的解吸动力学行为及柠檬酸和酒石酸对2种重金属离子解吸的影响。结果表明,虽然2种土壤对Pb(Ⅱ)的吸附量比Cu(Ⅱ)高得多,但无论在单一重金属体系还是Cu(Ⅱ)和Pb(Ⅱ)共存体系中,Cu(Ⅱ)的解吸量均大于Pb(Ⅱ),湖州水稻土Cu(Ⅱ)的解吸量大于嘉兴水稻土,说明土壤对重金属离子的吸附亲和力越大,吸附的重金属离子越不易解吸。用E lovich方程拟合动力学数据可以获得比较满意的结果。解吸速率与时间的关系曲线表明,Cu(Ⅱ)和Pb(Ⅱ)的解吸速率随时间的增加迅速减小。Cu(Ⅱ)的解吸速率大于Pb(Ⅱ),柠檬酸和酒石酸不仅使重金属的解吸量增加,而且使Cu(Ⅱ)和Pb(Ⅱ)的解吸速率大大提高。2种有机酸对Cu(Ⅱ)解吸的促进作用大于Pb(Ⅱ),柠檬酸的促进作用大于酒石酸。     

3种大型海藻对含铅废水的生物吸附研究

运用批吸附技术研究了海带、裙带菜和条斑紫菜对水溶液中Pb2+的吸附特性。结果表明:pH是影响生物吸附的重要因素,海带和裙带菜吸附Pb2+的适宜pH在3~5之间,紫菜吸附Pb2+的最佳pH为4;在20~40℃范围内,3种海藻对Pb2+的生物吸附非常快,40 min达到吸附平衡,动力学数据符合准二级动力学模型;Langmuir和Freundlich模型成功地拟合了平衡数据。热力学分析表明吸附能够自发进行。红外光谱分析表明,羧基是海带和裙带菜吸附Pb2+的主要官能团。实验结果表明,用这3种海藻吸附剂对水溶液中Pb2+具有较好的吸附性能,海带和裙带菜的吸附容量相近,优于紫菜。