低浓度CO2在聚苯胺/Y分子筛复合材料上的吸附

根据原位聚合方法将不同量的苯胺分别聚合在Y分子筛上,得到3种聚苯胺(PANI)/Y分子筛复合材料PANI-Y~(-1)、PANI-Y-2及PANI-Y-3,用傅立叶红外及氮气吸附实验表征了材料的结构特征,探讨了复合材料对常压下低浓度CO_2的吸附及再生性能.结果表明,苯胺在Y分子筛上成功聚合,复合材料的比表面积分别为52、54和35 m2·g~(-1),孔道由大孔和少量中孔组成,微孔极少.PANI负载量越大,材料的孔容越低.20℃下,初始体积分数为10%的CO_2在复合材料与Y分子筛上的吸附符合Logistic模型,吸附量的顺序为PANI-Y-2(2.09 mmol·g~(-1))PANI-Y-3(1.79 mmol·g~(-1))PANI-Y~(-1)(1.07 mmol·g~(-1))Y分子筛(0.80 mmol·g~(-1)),复合材料对CO_2的吸附受PANI负载量和比表面积的共同影响.在2%~10%的范围内,CO_2在复合材料上的吸附量随初始体积分数增加而增加;在25~65℃下,吸附量随温度升高而降低.80℃下,PANI-Y-2的4次热再生效率较差,仅68%;采用氨水/热再生相结合的方式脱附CO_2,再生率提高到94%.     

Recent advances in thin film composites membranes for brackish groundwater treatment with critical focus on Saskatchewan water sources

Drinking water scarcity is an ever-increasing global concern. This issue appears as a greater threat to the countries with no access to sea water resources or rivers, since their potential water resources are only limited to ground waters only. There are serious concerns with the treatment of ground water resources, including landfill leachates, agricultural contaminations (pesticides, herbicides, and fertilizers), and rural contaminations. Membrane separation has been proved to be the governing technology in water and wastewater treatment plants, as these methods are responsible for more than half of the market share of the world's desalination capacity. This study intends to offer a holistic view of the groundwater contamination with specific focus on Saskatchewan province in Canada, and the recent efforts in the groundwater treatment using thin film composite membrane technology. This study begins with an introduction of the general aspects of ground water and membrane separation, polluting agents, and their sources. It is followed by a discussion of Saskatchewan's groundwater status and various issues. Furthermore, the recent research that became available since 2010 is reviewed in details and the results are summarized with respect to purification efficiency. Different affecting parameters in a groundwater-thin film composite system are synthesized and an in-depth overview is presented.     

“Measuring Sustainability”: A Multi-Criterion Framework

So far, the elementary question of whether one country’s or region’s economy is moving towards sustainability or away from it cannot be answered with unanimous consensus on the ‘measuring rod(s)’ to be employed. The main assumption of this article is that sustainability assessment needs a set of multi-dimensional indicators. From this assumption a question arises: how could such indicators be aggregated? Often, some indicators improve while others deteriorate. For instance, when incomes grow, SO₂ might go down while CO₂ increases. It has to be noted that this is the classical conflictual situation studied in multi-criteria decision theory. The use of a multi-criterion framework for making operational the ‘measuring of sustainability’ is discussed here by means of illustrative examples and more formal arguments.     

考虑过渡区影响的粉喷桩复合地基承载特性的有限元数值分析

粉喷桩成桩过程中不可避免地会带动桩间土产生强烈的挤压和振动,在固化剂与桩体发生物理化学反应的同时,桩周一定范围内的土体也进行了固化和挤密,使得在桩土交界处形成环向变化的过渡区,过渡区的材料由桩逐渐过渡到桩间土,因此有必要考虑该过渡区对粉喷桩复合地基承载特性的影响。本文从粉喷桩复合地基桩土交界处的特点出发,考虑了桩土材料性质变化的过渡区单元,利用上的摩尔—库仑本构模型,和Plaxis专业岩土软件对粉喷桩复合地基进行了有限元数值分析,就粉喷桩复合地基中桩和土的承载特性得出了一些有益的结论。     

高炉渣制备光催化剂及其催化活性的研究

以废弃的冶金高炉渣为原料,采用混酸酸溶-水热合成法制备了光催化剂,并对其进行了SEM、UV-Vis、XRD、比表面积等物性测试分析;通过处理甲基橙模拟废水,探讨了制备过程中渣酸比、混酸配比、渣用量、溶渣时间等条件对高炉渣制光催化剂活性的影响。将所制光催化剂与P25光催化剂进行对比分析,结果表明,高炉渣制光催化剂不仅具有较高的光催化活性,而且制备成本低廉,仅为P25光催化剂的1/10,这对于冶金高炉渣的循环再利用及光催化氧化技术的工业化应用具有重要的实际意义。     

苯在TiO2上的气相光催化反应性能

在一个循环式光反应系统中进行了苯的气相光催化实验.考察了催化剂与反应物的接触面积,催化剂用量和苯的初始浓度对苯光催化氧化反应的影响.结果表明,催化剂与反应物的接触面积和光强度的共同作用是影响苯光催化降解速度的主要因素.实验条件下,催化剂接触面积增加2倍,反应时间缩短260min.再将光强度提高1倍,反应时间缩短320min;催化剂用量对反应过程的影响主要是催化剂层吸附能力的影响,随着催化剂用量的增加这种影响逐渐减弱.当催化剂用量从0.1g增加到0.5g时,反应时间缩短100min,而从0.5g增加到1.5g时只缩短20min;当系统中苯的浓度较低时,随着初始浓度的增加反应中苯的浓度变化增大,但在高浓度系统中初始浓度的影响不明显.     

飞机用铝合金-CFRP搭接结构的电偶腐蚀预测研究

目的通过有限元仿真,预测飞机复合材料-铝合金搭接试件可能产生的腐蚀部位和腐蚀深度。方法采用动电位极化的方法,测得温度为40℃的5%NaCl溶液中铝合金和复合材料两种材料的极化曲线。以极化曲线及其拟合的电化学动力学参数作为边界条件,建立电偶腐蚀仿真模型。通过模型计算,分别得到两种材料的腐蚀预测结果,将其结果与实验室腐蚀试验结果进行对比。结果电偶试件模型预测得到的电偶电位值与实验测量得到的电偶电位值对比误差为4.2%。搭接试件的腐蚀部位为偶接处3 mm内,其腐蚀分布与搭接件电偶腐蚀模型预测的电位分布规律基本一致,腐蚀深度的预测值和腐蚀实验的实测值对比误差为12.5%。结论该研究的仿真预测结果与试验结果在一定程度上具有一致性,证明了仿真模型的正确性。     

Preparation and characterization of visible-light-active nitrogen-doped TiO2 photocatalyst

A visible-light photocatalyst was prepared by calcination of the hydrolysis product of Ti(SO4)2 with ammonia as precipitator. The color of this photocatalyst was vivid yellow. It could absorb light under 550 nm wavelength. The crystal structure of anatase was characterized by XRD. The structure analysis result of X-ray fluorescence(XRF) shows that doped-nitrogen was presented in the sample. The photocatalytic activities were evaluated using methyl orange and phenol as model pollutants. The photocatalytic activities of samples were increasing gradually with calcination temperature from 400℃ to 700℃ under UV irradiation. It can be seen that the degradation of methyl orange follows zero-order kinetics. However, the calcination temperatures have no significant influence on the degradation of phenol under sunlight. The N-doped catalyst shows higher activity than the bare one under solar irradiation.     

附载型复合光催化剂TiO2·SiO2/beads降解有机磷农药

研究以四异丙醇钛 [Ti( iso- O C3 H7) 4]、硅酸乙酯为原料 ,以空心玻璃微球为载体 ,用溶胶—凝胶法制备可漂浮附载型复合光催化剂 Ti O2 · Si O2 / beads的过程 ,利用附载型复合光催化剂降解有机磷农药。结果表明 ,复合型光催化剂 Ti O2 · Si O2 摩尔比存在最佳值 ,n ( Ti O2 ) / m ( Si O2 ) =30 / 70时 ,光催化剂活性最高 ,其活性是同样降解条件下、同样含量 Degussa P- 2 5Ti O2 的 2倍左右。该光催化剂比表面大 ,吸附性强。并用 XRD和 SEM对附载型复合光催化剂进行表征     

添加剂升温烧蚀法在制备新型介孔水环境净化材料中的应用

首次探索了一种破坏式造孔与有机复合相结合的新方法以制备介孔复合水环境净化材料,使最终产品成为一种具有广谱孔结构分布的复合环境材料。详细介绍了该方法的第二步工艺即添加剂升温烧蚀法,在优化后的最佳条件下,产品的孔径得到了进一步扩大,其中部分孔道直径可达至介孔级,同时材料的表面得到了进一步活化。经此步工艺后,所制备的中间产品染料吸附量是原材料的194倍,是酸洗刻蚀后产品的122倍;24h吸湿率是原材料的38倍,是酸洗刻蚀后产品的19倍。