负载金属活性碳纤维对NO催化分解性能的研究

碳纤维用于环境保护,污染治理是个重要课题,采用浸渍法研制系列钯负载活性碳纤维,研究了它们对NO的歧化分解性能,并与其它载体催化剂进行比较,实验结果表明负载钯活性碳纤维在300℃以上能催化NO的歧化分解。负载钯活性炭和负载钯炭黑分解NO的能力明显比前者弱,石墨和分子筛载体负载钯催化剂在400℃仍没有催化分解NO的作用。催化反应温度升高,NO流量降低,钯负载量增加有利于NO分解率提高,采用钯－铜混合物负载活性碳纤维可以减少钯的使用量。     

负载型燃烧催化剂La_(0.8)Ce_(0.2)CoO_3/Ce_(0.8)Zr_(0.2)O_2制备及性能研究

以复合氧化物La0.8Ce0.2CoO3为活性组分,Ce0.8Zr0.2O2固溶体为载体,采用柠檬酸络合法制备出负载型燃烧催化剂La0.8Ce0.2CoO3/Ce0.8Zr0.2O2。用XRD、BET和SEM对其进行表征,考察了焙烧温度、反应时间、反应温度及H2S存在对催化剂活性的影响。结果表明,载体表面形成了均一的钙钛矿相;该负载型催化剂对二甲苯完全氧化反应具有较高的催化活性,有良好的热稳定性、操作稳定性和强的抗H2S毒化能力。这可能是载体与负载组分之间密切的协同作用所导致。     

Oxidation inhibition of sulfite in dual alkali FGD system

A laboratory-scale well-mixed thermostatic reactor with continuously blasting air was used to investigate the oxidation inhibition of sulfite in dual alkali flue gas desulfurization （FGD） system. The effects of operating parameters such as pH value and catalyst concentration on the oxidation were studied. Sodium thiosulfate was used in the system, and was found that it significantly inhabited the sulfite oxidation. In the absence of catalyst, sodium thiosulfate at 12.67 mmol/L had an inhibition efficiency of approximately 98%. While in the presence of catalyst, sodium thiosulfate at 26.72 mmol/L had an inhibition efficiency less than 85.0%. The oxidation reaction order of sulfite in the sodium thiosulfate was determined to be -1.90 and 4）.55 in the absence and presence of the catalyst, respectively. Apparent activation energy of oxidation inhibition was calculated to be 53.9 kJ/mol. Pilot tests showed that the consumption rate of thiosulfate agreed well with the laboratory-scale experimental results.     

废FCC催化剂对水中铅离子的连续吸附及脱附

通过测定吸附等温线，考察了Ｐｂ２＋在废ＦＣＣ（流化催化裂化）催化剂上的吸附性能及规律，结果表明，Ｐｂ２＋在废ＦＣＣ催化剂上的吸附规律可用Ｌａｎｇｍｕｉｒ和Ｆｒｕｎｄｌｉｃｈ模式描述，吸附呈单分子层形式且容易进行。又通过填充床吸附试验，对Ｐｂ２＋的连续吸附及脱附情形作了考察。结果表明，在温度为１５℃、ｐＨ为５．１３、过柱速率为３．０ｍＬ／ｍｉｎ、径高比为２．２５．０条件下，吸附柱具备适宜的生产周期，连续吸附操作可行，柱效率可达７５．９％；在温度为１５℃、采用２ｍｏｌ／Ｌ稀盐酸作脱附剂，过柱速率为５．０ｍＬ／ｍｉｎ的条件下，吸附剂易于脱附再生，脱附效率可达７８．１％     

V2O5/TiO2催化剂中毒机理的试验研究

选择性催化还原(SCR)催化剂是SCR烟气脱硝技术的核心,是整个SCR系统脱硝效率和经济性的决定因素.本文工作的主要研究思路是以钒钛SCR催化剂为研究对象,研究了H2O和SO2,以及相同含量下K、Na、Ca、Pb的氧化物对钒钛催化剂NO转化率的影响.H2O的存在会抑制V2O5/TiO2催化剂脱硝活性,而SO2在一定程度上促进(V2O5/TiO2)催化剂的SCR脱硝反应,提高NO转化率;碱金属K对钒钛催化剂的钝化作用都是最强,K2O和Na2O的掺入会抑制钒钛催化剂上V2O5的还原能力,而CaO和PbO的掺入对钒钛催化剂上V2O5的还原能力影响较小.     

Effects of WOx modification on the activity, adsorption and redox properties of CeO2 catalyst for NOx reduction with ammonia

A series of WO₃/CeO₂ (WOx/CeO₂) catalysts were synthesized by wet impregnation of ammonium metatungstate on a CeO₂ support. The resulting solid acid catalysts were characterized by X-ray diffraction (XRD), UV-Vis spectroscopy (UV-Vis), Raman spectroscopy (Raman), in-situ Fourier transform infrared spectroscopy (in-situ FT-IR) of ammonia adsorption, NH₃-TPD, H₂ temperature-programmed reduction (H₂-TPR), NH₃/NO oxidation and activity measurements for NOx reduction by NH₃ (NH₃-SCR). The results show that polytungstate (WOx) species are the main species of tungsten oxide on the surface of ceria. The addition of tungsten oxide enhances the Brönsted acidity of ceria catalysts remarkably and decreases the amount of surface oxygen on ceria, with strong interaction between CeO₂ and WOx. As a result, the N₂ selectivity of NH₃ oxidation and NH₃-SCR at high temperatures (> 300℃) is enhanced. Therefore, a wide working temperature window in which NOx conversion exceeds 80% (NOx conversion > 80%) from 200 to 450℃, is achieved over 10 wt.% WOx/CeO₂ catalyst. A tentative model of the NH₃-SCR reaction route on WOx/CeO₂ catalysts is presented.     

光助Fenton反应催化剂Fe/Al2O3的制备及其对六氯苯的催化活性研究

采用超声促进浸渍法制备了光助Fenton催化剂Fe/Al2O3,利用该催化剂对六氯苯（HCB）进行光助Fenton氧化降解,考察了浸渍液浓度、浸渍温度、灼烧温度和灼烧时间等制备条件对其催化降解六氯苯的活性的影响,确定了制备Fe/Al2O3的工艺条件,并对制得的催化剂进行表征。结果表明,超声促进浸渍法制备非均相光助Fenton反应催化剂Fe/Al2O3的最佳工艺条件为：浸渍液浓度25mmol/L,浸渍温度40℃,焙烧温度500℃,焙烧时间3h。在此条件下制备的催化剂对六氯苯的降解具有较高的催化活性。     

多金属氧酸盐电催化降解染料废水的研究

采用IR和XRD等手段对磷钼酸(PMo12)和3,3',5,5'-四甲基联苯胺(TMB)形成的电荷转移配合物(TMB)3PMo12进行表征,结果表明配合物中的杂多阴离子仍保留着Keggin结构.将配合物负载于γ-Al2O3上制备(TMB)3PMo12/γ-Al2O3负载型催化剂填充于电化学反应器中,考察电催化氧化体系降解酸性大红3R染料废水的效果.研究表明,(TMB)3PMo12/γ-Al2O3催化剂对酸性大红3R废水显示了良好的电催化活性,催化剂填充量为50g,负载量为0.6%时,在pH值为4,槽电压15.0V,曝气量0.14m3/h,极板间距3.0cm反应条件下,60min后,色度去除率达到79.7%,去除效果较传统二维平板和三维电解槽更高.     

催化湿式氧化处理造纸废水的研究

以过渡金属氧化物CuO为活性组分,采用催化湿式氧化法处理造纸废水,考察Cu负载量、催化剂用量、反应温度对废水COD去除率的影响。结果表明:固定氧气分压在2.5MPa和反应时间3h,催化剂用量为3g,Cu负载量为4%,反应温度为220℃,500mL浓度为3250mg/L造纸废水的COD去除率为90%,色度去除率为89%,pH值由9.6变为7.8。另外,对催化剂进行再生处理和稳定性测试。结果表明:450℃下活化3h,在上述相同反应条件下,对原废水的COD去除率降低为88%,重复使用9次后对废水的COD去除率仍能保持在85%左右。     

Pd/C气体扩散电极用于电生成H2O2降解苯酚的研究

采用自制的Pd/C气体扩散阴极和Ti/IrO2/RuO2阳极,在无隔膜电解槽中对苯酚模拟废水降解效果及机制进行了研究,采用电子自旋共振法(ESR)对电解体系中产生的羟自由基(·OH)进行了检测.结果表明,在Pd/C气体扩散体系中掺杂Pd催化剂可以促进H2 O2的生成(H2 O2的稳定浓度是7.5 mg/L),有利于·OH的产生.经电化学氧化处理120 min后,苯酚和COD的去除率分别达到97.2%和50%,表明在电催化氧化过程中苯酚被氧化生成了大量低分子量中间产物.废水的BOD5/COD值达到0.73是处理前的9.1倍,苯酚废水的可生化降解性通过电化学氧化处理后显著提高.在该电化学体系中苯酚的降解是在阳极直接、间接氧化及阴极产生的H2 O2、·OH的氧化共同作用下完成的.通过对紫外扫描光谱图的分析推断出苯酚在电解过程中有醌类物质生成;由GC-MS检测到了邻苯二酚、对苯二酚、苯醌等芳香族化合物和己二酸、顺丁烯二酸、反丁烯二酸、丁二酸、丙二酸、乙二酸等短链羧酸,据此提出了苯酚降解的可能历程.