仿酶型磁性Fe~0-Fe_3O_4复合催化剂的制备及其催化性能

采用原位氧化沉淀法制备出仿酶型磁性Fe0-Fe_3O_4复合催化剂,并将其作为非均相类Fenton催化剂用于溶液中对硝基苯酚的降解;采用SEM和XRD等技术对催化剂进行了表征。表征结果显示,Fe_3O_4与Fe0结合牢固,有利于Fe0的分散。实验结果表明:Fe0-Fe_3O_4对对硝基苯酚的降解为拟一级反应;在Fe0与Fe_3O_4的质量比为0.75、Fe0-Fe_3O_4投加量为1.2 g/L、初始H_2O_2浓度为10 mmol/L、初始溶液p H为3、反应温度为30℃的条件下反应90min,反应速率常数为0.067 min-1,COD去除率为77.28%,Fe溶出量为2.12 mg/L;在对硝基苯酚的降解过程中,pH先增大后减小,Fe溶出量先降低后升高;Fe0-Fe_3O_4是一种稳定的催化剂,可再生使用。     

从废FCC催化剂和废汽车尾气净化催化剂中回收稀土的研究进展

以稀土元素(简称稀土)用量较大的废FCC催化剂和废汽车尾气净化催化剂为研究对象,分析总结了两类废催化剂中稀土的成分和回收方法。从废催化剂中回收稀土普遍采用先浸出、后分离提纯的方法。浸出普遍采用无机酸(多为盐酸),分离方法包括溶剂萃取法、化学沉淀法等,最后经焙烧得到稀土氧化物。为从废催化剂中高效回收稀土,可着重考察新浸出机制的引入、分离方式的选择、分离试剂的应用,以及浸出和分离条件的优化,从而为实现工业化回收提供技术支持。     

Biodiesel production from a free fatty acid containing Karanja oil by a single-step heterogeneously catalyzed process

Karanja oil, containing 6.2% free fatty acids (FFAs), was considered for biodiesel production using a single-step solid-phase acid catalyzed process. Different types of zeolites and Amberlyst15 catalysts were tested and biodiesel was produced. Under similar conditions, the highest biodiesel yield was achieved using an Amberlyst15 catalyst, which contained 3–5% of moisture. The effects of operating parameters of the reaction such as reaction temperature, catalyst amount, and methanol-to-oil ratio were studied. An increase of methanol:oil ratio revealed a non-monotonic increase in biodiesel yields. Similar non-monotonic behavior was observed when Jatropha oil was used. Leaching and catalyst reusability were also considered. No significant effects of leaching were observed and catalyst reusability appeared to be affected by methanol interactions. The presence of a co-solvent, Tetrahydrofuran (THF), increased the biodiesel yield. Furthermore, an optimum amount of THF (THF:methanol volume ratio of 1:2) gave rise to the highest biodiesel yield. A biodiesel yield of 93% was achieved at 120 °C using a single-step process with Amberlyst15 as a catalyst, THF as a co-solvent, and a methanol:oil ratio of 30:1.     

磷化氢液相催化氧化净化催化剂的初筛

传统的净化方法难以实现低成本、高效、选择性净化低浓度磷化氢尾气,这限制了含磷化氢尾气的资源化技术的实现。通过Pd(Ⅱ)、Fe(Ⅲ)、Cu(Ⅱ)、Pd(Ⅱ)-Cu(Ⅱ)、Pd(Ⅱ)-Fe(Ⅲ)对低浓度磷化氢连续净化的研究,筛选出在低温(<80℃)、常压下对低浓度磷化氢(850mg/m3)具有液相催化氧化净化活性的Pd(Ⅱ)、Pd(Ⅱ)-Cu(Ⅱ)、Pd(Ⅱ)-Fe(Ⅲ)3种催化剂,其中Pd(Ⅱ)催化氧化净化低浓度磷化氢的净化效率>60%,Pd(Ⅱ)-Cu(Ⅱ)及Pd(Ⅱ)-Fe(Ⅲ)催化氧化低浓度磷化氢(850mg/m3)的净化效率可达100%。     

六氯苯碱催化分解脱氯效果及影响因素研究

采用自主设计开发的碱催化设备研究了碱催化分解技术(BCD)对六氯苯(HCB)脱氯的效果.考察了反应温度、氢氧化钠投加比例以及不同催化剂对六氯苯去除效率、脱氯效率以及中间代谢产物的影响.提高反应温度和氢氧化钠投加比例能够有效提高六氯苯的脱氯解毒效率,当六氯苯与氢氧化钠投加质量比为1:5时,在360℃下反应4h后,六氯苯的去除率为99.97%,脱氯效率达到91.08%.还原铁粉作为催化剂时,在330℃反应1h后,能够将六氯苯的脱氯效率由38.99%提高至77.51%.     

芳烃燃烧钯催化剂的研究--载体、制备方法对催化活性的影响

以苯蒸气作为催化燃烧气，研究了３ 种不同载体和３ 种不同制备方法对金属负载型钯催化剂芳烃催化燃烧性能的影响，并用ＳＥＭ 对催化剂的表现形貌进行了分析．结果表明，载体及催化剂制备方法不同，催化剂的活性及耐热性不同．经一定的高温预处理后的含有稀土的ＦｅＣｒＡｌ 合金作载体性能较另两种载体优良；并提出了该催化剂较好的制备方法．     

Hydrothermal fabrication and visible-light-driven photocatalytic properties of bismuth vanadate with multiple morphologies and/or porous structures for Methyl Orange degradation

Monoclinic BiVO₄ with multiple morphologies and/or porous structures were fabricated using the hydrothermal strategy. The materials were characterized by means of the XRD, Raman, TGA/DSC, SEM, XPS, and UV-Vis techniques. The photocatalytic activities of the BiVO₄ materials were evaluated for the degradation of Methyl Orange under visible-light irradiation. It is observed that pH value and surfactant exerted a great effect on the morphology and pore structure of the BiVO₄ product. Spherical BiVO₄ with porous structures, flower-cluster-like BiVO₄, and flower-bundle-like BiVO₄ were generated hydrothermally at 100℃ with poly(vinyl pyrrolidone) (PVP) and urea (pH = 2) and at 160℃ with NaHCO₃ (pH = 7 and 8), respectively. The PVP-derived BiVO₄ showed much higher surface areas (5.0-8.4 m²/g) and narrower bandgap energies (2.45-2.49 eV). The best photocatalytic performance of the spherical BiVO₄ material with a surface area of 8.4 m²/g was associated with its higher surface area, narrower bandgap energy, higher surface oxygen vacancy density, and unique porous architecture.     

SCR脱硝催化剂失活机理研究进展

在烟气脱硝系统中,选择性催化还原催化剂的中毒和再生是广泛关注的问题。本文从催化剂的烧结、As、Ca、碱金属中毒等方面阐述了SCR脱硝催化剂的失活机理。通过总结催化剂的各种失活机理,可以有针对性地根据燃料的特性以及飞灰的成分进行SCR脱硝系统的优化设计,从而有针对性的制定防止催化剂失活的措施,这对延长催化剂寿命,降低SCR脱硝系统的运行维护费用具有重要意义。     

Mn-Co/蜂窝陶瓷催化剂制备及催化臭氧化对苯二酚效能

为了提高金属催化剂的活性和使用寿命,以硝酸钴Co(NO3)2·6H2O和硝酸锰Mn(NO3)2作为前驱体,蜂窝陶瓷(ceramic honeycomb,CH)作为载体,采用涂覆法制备了4种不同质量比的Mn-Co/CH催化剂,通过XRD、N2-吸附/脱附、FESEM和XPS等方法分析了催化剂的结构,研究了催化剂的材料力学性能,建立了单独臭氧和催化臭氧化对苯二酚的反应动力学模型,考察了催化剂催化臭氧化的效能.结果表明,Mn1Co1/CH(Mn∶Co=1∶1)催化剂的晶相主要以Mn3O4和Co O为主,具有较大的比表面积、孔容和孔径,分别达到190 m~2·g~(-1)、0.25 cm3·g-1和4.8 nm;Mn1Co1/CH催化剂的催化活性最高,对苯二酚和COD的去除率分别达到78%和54%.Mn-Co/CH催化剂的抗压缩强度大(15.89~16.94 MPa).当添加叔丁醇时,对苯二酚去除率显著下降,·OH在Mn1Co1/CH催化臭氧化过程中起着重要的作用,催化臭氧化对苯二酚符合一级反应动力学模型.Mn-Co/CH催化剂用量少、催化效率高、使用寿命长,易于实现工业化.     

Effects of Ce on catalytic combustion of methane over Pd-Pt/Al2O3 catalyst

Activity and stability of 1%Pd-0.2%Pt/Al₂O₃ and 1%Pd-0.2%Pt/0.6%Ce/Al₂O₃ catalysts prepared by impregnation method for catalytic combustion of methane in air were investigated. The catalysts before and after reaction were characterized by BET, CO chemisorption, XRD and XPS techniques. Results showed that the presence of Ce significantly increased the activity and thermal stability of the Pd-Pt/Al₂O₃ catalyst towards methane combustion, which could be attributed to more highly-dispersed active PdO particles over the Pd-Pt/Ce/Al₂O₃ catalyst surface as well as the retarded sintering of PdO and the maintained oxidized state of surface Pd during the combustion process in the presence of Ce.