军用防腐涂料涂装的发展探讨

对国内外武器装备腐蚀控制的基本现状进行分析。论述了防腐涂料涂装技术在装备腐蚀控制中的重要作用。通过对美军腐蚀控制策略和在研军用防护涂层项目的分析．提出了军用防腐涂料涂装技术的发展方向。根据我国目前军用防护涂层的发展状况，提出我国发展军用防腐涂料涂装技术建议。     

某海洋平台上海水篮式过滤器事故分析

目的研究分析东海某一海上平台海水用篮式过滤器发生的腐蚀和堵塞事故原因。方法从海洋平台海水系统用篮式过滤器的原理、工艺流程、材料选择、滤网精度,滤芯设计、人工操作等多方面进行分析。结果受内压滤芯结构要优于受外压滤芯结构,如果过滤精度选择过高,会增加压差,造成滤芯堵塞。结论篮式过滤器滤芯单元应采用多滤芯的受内压结构,过滤精度应根据下游用户要求来确定。     

常压塔塔顶腐蚀关键参量相关性分析与预测

预测常压塔顶回流罐切水的关键离子浓度可以为常压塔顶系统工艺防腐提供技术指导。收集了某炼厂2014-2016年常压装置的生产实时工艺参数、原料及产品采样数据、水质分析化验参数,采用线性插值方法对不同时间尺度的数据进行补全。通过线性相关性分析获得了影响常压塔顶回流罐切水总铁离子浓度、pH的主要因素,并基于深度学习、支持向量机回归、粒子群优化方法建立了腐蚀关键参量预测模型。结果表明,pH值和总铁离子浓度的相关因素大部分重叠,与原料性质及产品馏出温度较强相关;建立的回归模型预测精度高,在训练集和预测集上,总铁离子浓度预测值与测量值最大偏差分别为4. 4%和9. 8%,pH值预测值与测量值最大偏差分别为0. 9%和1. 1%。     

利用薄片穿透法确定铝合金最大蚀坑深度

目的研究铝合金最大蚀坑深度与环境试验时间的对应关系,为新型合金服役前的耐蚀性评级和结构件服役过程中的剩余寿命预测提供技术基础。方法利用光学显微镜、扫描电镜分析海洋大气环境中新型铝合金的腐蚀类型,并利用薄片穿透法研究铝合金薄片最大蚀坑深度与试验时间的对应关系。结果经过海洋大气环境暴露试验后,2A97铝合金发生了深入合金内部的严重点蚀,检测薄片试样背面电解液的出现时间,可以确定环境试验中蚀坑穿透薄片试样的时间。通过测量不同厚度薄片试样的穿透时间,可以确定最快生长局部腐蚀点的深度和时间的关系。结论中性盐雾试验环境下,达到相同的最大蚀坑深度,2A97铝合金与AA2024铝合金用时基本相当。     

基于双参数威布尔分布的高强度铝合金材料腐蚀损伤分布动力学规律研究

目的研究高强度铝合金材料腐蚀损伤分布的动力学规律。方法通过统计高强度铝合金材料的蚀坑深度和直径,采用双参数威布尔分布进行拟合,提出以双参数威布尔分布中的两个参数α、β作为高强度铝合金材料腐蚀损伤分布的表征量,建立α、β随腐蚀时间增长的多种数学模型。结果α随腐蚀时间的增长而减小,β随腐蚀时间的增长而增大,并且分布参数均能很好地符合一阶指数函数模型。结论与实际蚀坑分布增长物理现象比较,α、β的变化趋势能够揭示出蚀坑分布随时间增长的变化过程,并且腐蚀损伤分布动力学规律能很好地符合一阶指数函数模型。     

油田用钨合金镀层腐蚀性能评价研究

目的评价钨合金镀层油管的腐蚀性能。方法利用高压釜模拟高压气井和高含硫气井的腐蚀环境,进行高压高温腐蚀试验,以及标准的氢致开裂(HIC)和硫化氢应力腐蚀试验。采用电子扫描显微镜(SEM)及其能谱仪(EDS)和X射线衍射分析仪(XRD),分析或检测钨合金镀层和基管的腐蚀形貌、腐蚀产物的组成。结果油管表面的钨合金镀层平整而致密,其主要组成元素为W和Ni。高温高压腐蚀试验后,镀层仍然致密平整,腐蚀程度轻微。在60、90、120、140℃试验7天时,镀层和基材的H_2S/CO_2腐蚀速率分别为0.0179、0.0093、0.0102、0.0369 mm/a和1.030、1.272、1.183、0.991 mm/a。试验30天,在120℃时,其H_2S/CO_2腐蚀速率分别为-0.0085、0.1789 mm/a;在160℃时,其CO_2腐蚀速率分别为0.0091、0.8976 mm/a。该钨合金镀层均通过了标准的氢致开裂和硫化氢应力腐蚀试验。结论该钨合金镀层具有很好的耐腐蚀性能。     

挺水植物化感作用抑制藻类生长的机理与应用

根据国内外挺水植物化感作用抑制藻类的研究,对菖蒲等15科20种挺水植物化感抑制水华鱼腥藻等18种水华藻类的作用予以评述;归纳了挺水植物化感作用在影响藻细胞亚显微结构、酶体系活性、呼吸作用、光合作用、细胞膜和细胞内小分子物质的含量等6方面的抑制藻类生长的机理;对移植栽种植物共培养、从植物中提取化感物质和直接施加化感物质等3种类型抑制藻类的应用方式进行概述;结合当前中国水华频发、抑藻和除藻任务繁重的现状,指出存在的主要问题并提出今后研究和应用化感作用抑制藻类的展望。     

Screening the methanolic extracts of some plants for tyrosinase inhibitory activity

Melanin is responsible for pigmentation of skin and hair. It protects the skin from the harmful effects of UV radiation; however, its abnormal production may lead to different diseases such as hyper-pigmentation or vitiligo. Tyrosinase is a key enzyme in melanin production, therefore inhibitors of this enzyme should have broad application. Due to the adverse effects of synthetic inhibitors currently being used, the search for new inhibitors, especially natural ones, is needed. The methanolic extracts of 80 plants were tested for their tyrosinase inhibitory activities by spectrophotometry at 492?nm. The inhibition mode of effective plant extracts was determined using the Lineweaver-Burk plots. Among these plant extracts, Alhagi camelorum (camel thorn), Camelia sinensis (green tea), Cuminum cyminum (Cumin), Lawsonia inermis (henna), Quercus infectoria (masso), and Vaccinium arctostaphylos (Caucasian whortleberry) were identified as tyrosinase inhibitors with inhibitory effect of more than 50% at concentrations of 1.14?g?L^?1. The inhibition mode of four newly found effective plant extracts showed that A. camelorum and V. arctostaphylos inhibit the enzyme in a competitive manner whereas L. inermis and Q. infectoria have mixed inhibitory effect. To recommend these plant extracts for hyper-pigmentation disorders and other applications, further in vitro and in vivo studies are needed.     

Evaluation of the toxicity of tetrabromobisphenol A and some of its oxidation products using a micro-scale algal growth inhibition test

A micro-scale algal growth inhibition (μ-AGI) test using a common micro-plate based fluorometric detection was used to demonstrate the effects of humic substances (HSs) on the toxicity of tetrabromobisphenol A (TBBPA) and its oxidative decomposition products 2,5-dibromo-1,4-benzoquinone (2,5-DBBQ), 2,5-dibromohydroquinone (2,5-DBHQ), 2,6-dibromobenzoquinone (2,6-DBBQ), and 2,6-dibromophenol (2,6-DBP) to Pseudokirchneriella subcapitata. The EC₅₀ values were: EC_50(TBBPA) = 7 mg L^?1, EC_50(2,5-DBHQ) = 7 mg L^?1, EC_50(2,5-DBBQ) = 19 mg L^?1, EC_50(2,6-DBP) = 49 mg L^?1, and EC_50(2,6-DBBQ) = 13 mg L^?1. The toxicity of the chemicals was slightly lower in the presence of HA. The toxicity of TBBPA decomposed by a biomimetic catalytic system consisting of iron (III) 5,10,15,20-tetrakis (p-sulfonatophenyl) porphyrin (Fe(III)-TPPS) and KHSO₅ was also evaluated using P. subcapitata and Chlamydomonas reinhardtii.     

Presence of metals in drinking water distribution networks due to pipe material leaching: a review

Drinking water quality should remain constant from the drinking water treatment plant to the consumer's tap. However, water quality characteristics might be affected by interactions with pipe materials. This review describes the iron, copper, lead, zinc, aluminum, chromium, and cadmium in drinking water leached from the pipe material present in drinking water, as well as the factors and mechanisms that affect leaching processes. Data analysis suggests that monitoring the water quality in distribution systems is important for their proper management; however, the low measured concentrations highlight the need for sensitive sensors. In addition, further research is necessary to anticipate possible future effects before the installation of new materials/infrastructure or changes in water source/treatment.