海洋石油开发周边海域重金属锌的时空分布特征研究

海洋石油开发过程中重金属锌对海洋的影响日益受到关注。依据曹妃甸油田群海域2010—2018年长期海洋环境监测数据,采用克里金插值法和Hakanson生态风险指数法,分析了海域重金属锌的变化趋势、时空分布特征和潜在生态风险,探讨了可能来源并提出减缓措施。结果表明：研究海域海水水质锌呈现先降低后升高的趋势,平均含量2010年5月最高。2010年5月沉积物锌含量为(44.9±14.3)×10^-6低于渤海表层沉积物锌含量背景值(67.6±17.0)×10^-6。各期监测结果显示,油田区域未形成明显锌高值区。陆源排污、河流入海携带、航运、大气湿沉降等是研究海域重金属锌的重要来源。     

废润滑油絮凝脱色试验研究

废润滑油的回收再生利用不仅可以节约石油资源,而且是防治废润滑油污染、保护环境的主要措施.针对有污染的传统酸-白土废润滑油再生工艺,提出了以絮凝为主的无污染再生新技术,重点考察了影响废润滑油脱色再生效率的各种因素.结果表明,在絮凝剂用量为1.2%(体积分数)、搅拌时间为5 min、反应温度为75℃、沉降温度为80℃、沉降时间为2.0 h的条件下,废润滑油絮凝脱色效果最佳.废润滑油经过絮凝脱色和白土精制后理化指标得到了较大改善,基本接近该级别新油SC40的标准.     

碱性催化剂对农业废物液化产生生物油和气体的影响

采用热化学处理法对农业废物玉米秸秆和苹果渣进行处理,3种碱性物质Na2CO3、K2CO3和KOH作为催化剂,都能不同程度提高液化生物油收率、减少固体残渣收率.但碱性催化剂会降低气体收率,因而不适合作为以获得气体产物为目的的生物质气化试验的催化剂.就增加液化生物油收率方面而言,Na2CO3的催化效果最好,KOH催化效果次之,K2CO3的催化效果最差.     

蓖麻油衍生微乳液对菲的增溶和洗脱作用及其对菲污染土壤的修复机理

比较研究了蓖麻油硫酸盐(SCOS)与普通表面活性剂Triton X-100(TX100)、Tween 80(TW80)、Brij35、十二烷基苯磺酸钠(SDBS)和十二烷基硫酸钠(SDS)等对菲的增溶和洗脱作用.结果表明,菲表观溶解度与SCOS的浓度呈单一线性关系,SCOS微乳液对菲的增溶比SR=0.0314为最大,菲在微乳相和水相之间的分配系数logKem=4.44,大于菲在胶束相和水相之间的分配系数(logKmc).1:10土-水体系下,SCOS微乳液对菲污染土壤的清洗速率最快,清洗效率最高.SCOS有望成为土壤有机污染淋洗修复的增效试剂.     

船舶溢油事故等级评估方法比较

船舶溢油事故等级评估是船舶溢油应急计划研究的重要内容,它受到溢油量、事故发生位置等多种因素的影响,是复杂的多属性分类问题.利用熵值法、关联度法和BP神经网络法3种目前常用的事故等级评估方法,对上海港1984─2003年发生的12起船舶溢油事故进行了危害等级判定,以期探索溢油事故等级合理量化评估技术方法.对比了3种方法在结果一致性、误差精度上的优劣性及实际适用性.结果表明:BP神经网络和关联度法适用性较好,熵值法必须结合专家打分才能得到较好的判定结果;同时BP神经网络法的评估结果一致性比率较高,误差率较低,但存在建模成本高和对噪声较敏感的缺点.      

油田作业废水臭氧化处理技术的实验研究

针对油田作业废水(COD)高、难降解的特点,探讨了废水的pH、COD初始浓度、臭氧投加量和臭氧化时间等因素对油田作业废水的COD去除效果的影响。结果表明,臭氧化对油田作业废水COD去除效果影响的主要因素为废水pH、废水的COD和臭氧投加量;当废水的COD为1064.0mg/L、pH为3.0、臭氧投加量为10g/L时,废水的COD去除率达到69.1%;臭氧化处理对低浓度油田作业废水的COD去除效果低于其对高浓度废水的处理效果。     

植物油烟组分的色质联机分析

将植物油烟采集在玻璃纤维滤筒中 ,用环己烷处理样品 ,样品经过净化处理 ,然后进行色质联机分析。对油烟化学成分的分析有助于人们研究油烟对人体健康的影响     

非分散红外油分析仪特殊故障处理

本文针对目前国内外废水中石油类监测分析常用仪器非分散法油分析仪的一例特殊故障现象,分析查找出故障原因,提出了修复,调整故障仪器的方法。     

Effects of vegetable oil residue after soil extraction on physical-chemical properties of sandy soil and plant growth

Vegetable oil has the ability to extract polycyclic aromatic hydrocarbons(PAHs)from contaminated sandy soil for a remediation purpose,with some of the oil remaining in the soil.Although most of the PAHs were removed,the risk of residue oil in the soil was not known.The objective of this study was to evaluate the effects of the vegetable oil residue on higher plant growth and sandy soil properties after soil extraction for a better understanding of the soil remediation.Addition of sunflower oil and column ex...     

Integration of biological method and membrane technology in treating palm oil mill effluent

Palm oil industry is the most important agro-industry in Malaysia, but its by-product-palm oil mill effluent (POME), posed a great threat to water environment. In the past decades, several treatment and disposal methods have been proposed and investigated to solve this problem. A two-stage pilot-scale plant was designed and constructed for POME treatment. Anaerobic digestion and aerobic biodegradation constituted the first biological stage, while ultrafiltration (UF) and reverse osmosis (RO) membrane units were combined as the second membrane separation stage. In the anaerobic expanded granular sludge bed (EGSB) reactor, about 43% organic matter in POME was converted into biogas, and COD reduction efficiency reached 93% and 22% in EGSB and the following aerobic reactor, respectively. With the treatment in the first biological stage, suspended solids and oil also decreased to a low degree. All these alleviated the membrane fouling and prolonged the membrane life. In the membrane process unit, almost all the suspended solids were captured by UF membranes, while RO membrane excluded most of the dissolved solids or inorganic salts from RO permeate. After the whole treatment processes, organic matter in POME expressed by BOD and COD was removed almost thoroughly. Suspended solids and color were not detectable in RO permeate any more, and mineral elements only existed in trace amount (except for K and Na). The high-quality effluent was crystal clear and could be used as the boiler feed water.