北京城区可吸入颗粒物(PM10)的矿物学研究

使用X射线衍射技术(XRD)和扫描电镜技术(SEM/EDX)对北京PM10中的矿物组分进行了分析.结果表明,北京PM10中的矿物组分存在明显的季节变化规律,春季PM10中的矿物组成种类最多;秋季PM10中的矿物种类最少;在夏季PM10中,矿物的种类有所减少,却有新的物种出现,如NH4Cl、K(NH4)Ca(SO4)2?H2O、As2O3?SO3等.粘土矿物是北京PM10中含量最高的矿物,石英的含量次之,其他依次为方解石、石膏、长石、白云石以及其他矿物颗粒;北京PM10中还存在一定数量的复合颗粒,颗粒表面常有S、Cl元素的存在.     

Mathematical modelling and experimental validation of solar drying of mushrooms

This article presents two mathematical models for drying mushrooms considering the shrinkage effect. Both the models consider the physical changes of mushrooms during drying using the diffusion equation. A convective term is presented in the first model while, in the second model, the effective diffusion co-efficient is employed. Although the diffusion co-efficient is mainly dependent on the water content of the mushrooms, both models are suitable for analyzing the drying process. Moreover, in this study it has been demonstrated that both models are equivalent. The Genetic Algorithmic process was used to estimate the parameter values in different conditions. The information regarding the moisture content and the thickness evaluation taken from the models shows the best fit with the experimental data. The mathematical models developed to simulate the drying curve of mushroom have been evaluated and compared.     

Reducing the pollution risk of pesticide using nano networks induced by irradiation and hydrothermal treatment

Traditional pesticides (TP) often do not adhere tightly to crop foliage. They can easily enter the surrounding environment through precipitation and volatilization. This can result in the pollution of the surrounding soil, water, and air. To reduce pesticide pollution, we developed a loss-control pesticide (LCP) by adding attapulgite with a nano networks structure fabricated using high energy electron beam (HEEB) irradiation and hydrothermal treatment to TP. HEEB irradiation effectively dispersed originally aggregated attapulgite through modified thermal, charge, and physical effects. Hydrothermal treatment further enhanced the dispersion of attapulgite to form nano porous networks via thermal and wet expansion effects, which are beneficial for pesticide binding. An LCP has improved retention on crop leaf surfaces. It has a higher adhesion capacity, reduced leaching and volatilization, and extended residual activity compared with the TP formulation. The treatment increases the residual activity of pesticides on crop foliage and decreases environmental pollution.     

孤对电子杂环化合物的代谢化学和生物学研究进展

地球环境特别是化石燃料中存在着大量含硫,氮和氧孤对电子杂环化合物.对孤对电子杂环化合物代谢机制的研究具有重要的科学意义和实践价值.生物法降解这些杂环化合物具有较化学法无可比拟的优势,主要表现在生物法具有反应专一性好,反应条件温和,可实现许多化学上难以实现的反应.本文结合课题组的近期研究,尝试论述国内外的部分研究进展.     

Dechlorination of 2,2＇,4,4＇,5,5＇-hexachlorobiphenyl by thermal reaction with activated carbon-supported copper or zinc

Activated carbon （AC）-supported copper or zinc made from ion exchange resin （IRCu-C and IRZn-C） have an increased metal load of 557.3 mg·g^-1 and 502.8 mg·g^-1 compared to those prepared by the traditional method involving impregnation with AC and copper （II） citrate or zinc citrate solution （LaCu-C and LaZn-C） of 12.9 mg·g^-1 and 46.0 mg·g^-1 respectively. When applied to decompose 2,2＇,4,4＇,5,5＇-hexachlorobiphenyl at 250 ℃, IRCu-C achieved higher activity of 99.0% decomposition efficiency than LaCu-C of 84.7%, IRZn-C of 90.5% and LaZn-C of 62.7%. When the reaction temperature rose to 350 ℃, all the four kinds of reactants can decompose PCB- 153 with efficiency above 90%. Further, X-ray photoelec- tron spectroscopy characterization of IRCu-C before and after the reaction indicated transformation of 19.1% of Cu atoms into Cu^2＋, illustrating that Cu is the active ingredient or electron donor promoting the decomposition of PCB- 153. The mechanism underlying this process differs from a traditional H donor. However, there is no significant change on the surface of IRZn-C before and after the reaction, suggesting that Zn acts as catalyst during the process of PCB-153 decomposition.     

Comparative growth response of two varieties of <Emphasis Type="Italic">Vigna radiata</Emphasis> L. (var. PDM 54 and var. NM 1) grown on different tannery sludge applications: effects of treated wastewater and ground water used for irrigation

This study evaluates the possibility of using contaminated soil by treated tannery wastewater and the use of tannery sludge in agriculture. The plants of Vigna radiata var. PDM 54 grown on contaminated soil and irrigated with ground water have not shown the translocation of toxic metal (Cr) in the upper part. The biomass of the plant increased when irrigated with treated tannery wastewater compared to ground water, whereas no significant change was observed in chlorophyll and protein contents. In both the varieties (var. PDM 54 and var. NM 1) of V. radiata grown on tannery sludge amendments, the growth parameters exhibited a pronounced positive growth response up to 35% tannery sludge amendments compared with the plants grown on garden soil. Despite the Cr accumulation at lower amendments, no toxicity symptoms were observed in both the varieties of the plants. Higher amendments affected various growth parameters, NR activity, and carbohydrate content of the plants. The results suggest that the plants of V. radiata (var. PDM 54) may be grown on contaminated soil or lower sludge amendments and irrigated with ground water. No translocation of toxic metal Cr was found in the seeds of the plants grown in up to 25% tannery sludge. However, periodical monitoring is required before the consumption of seeds. Overall, the results showed that plant growth patterns were influenced to some extent by the level of soil contamination and the water used for irrigation.     

毛细管柱气相色谱法测定水质五氯酚

用乙酸酐衍生,正己烷液一液萃取,毛细管柱气相色谱-电子捕获检测器对地表水、废水中五氯酚进行了测定,确定五氯酚浓度范围在5．0—500μg/L之间时,样品的测定精度、回收率及方法检出限均能满足要求。     

串联微生物燃料电池的电压反转行为

微生物燃料电池是一种处理废水同时产电的具有广阔应用前景的新型水处理技术,其串联是产生更高电压的有效方法之一,但是会产生电压反转现象降低串联微生物燃料电池的性能.文章将二极管引入串联微生物燃料电池中以考察电压反转的行为.结果表明,不同的串联微生物燃料电池中均会发生电压反转.串联正向二极管的微生物燃料电池的电压反转行为与没...     

Effect of cooling rate and laser process parameters on additive manufactured Fe–Ti–C metal matrix composites microstructure and carbide morphology

In this paper, laser additive manufacturing (LAM) of Fe–TiC composite coating on AISI 1030 carbon steel is investigated using a numerical and experimental method. In order to have a desired result using LAM, it is crucial to understand the effects of the process parameters’ values on the TiC morphology and microstructure. For this purpose, the LAM process is numerically simulated in order to calculate cooling rate and peak temperature. Experimental data and numerical results are in good agreement in terms of the phase development. Results show that cooling rate plays a crucial role in phase transformation in the clad, however, final microstructure strongly depends on the cooling rate and powder's chemical composition. Two main carbide morphologies (i.e. dendritic and particulate) are studied and relevant cooling rates are detected. Based on this paper and developed map, it is possible to control the cooling rate in order to achieve specific carbide morphologies in the clad. In this study, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) are used to characterize clads’ microstructure.     

16种蛇鳞的微皮纹分析

对16种蛇鳞的扫描电镜观察表明,蛇类鳞片微皮纹的基本结构是由d约05μm横行排列的小孔和介于小孔间向后延伸的指状突构成背鳞的微皮纹结构有种的特异性同一种蛇的原动物、蛇蜕和药材标本相同部位的鳞片具有相同的微皮纹特征因此蛇鳞的微皮纹特征亦可作为蛇类药材的鉴别依据之一,并以背鳞的微皮纹特征为依据,编制了16种蛇背鳞微皮纹特征检索表。