粉煤灰最大往返剪切作用面上应变破坏标准的应力条件

基于文献[1]提出的最大往返剪切作用面上的液化应力条件和粉煤灰的动三轴试验数据,运用回归分析方法拟合曲线及相关参数建立了粉煤灰的破坏应力条件,并应用F检验法对参数的回归效果进行了检验,检验结果表明参数的回归效果高度显著。得出的破坏应力条件表明初始剪应力与动剪应力的倒数间并不呈线性关系,而是二次多项式关系,这与张克绪所提出的应力条件存在着差异。因此,可初步认为张克绪的液化应力条件不能直接运用于粉煤灰。     

首钢除尘灰特性分析及综合利用技术研究

通过对首钢烧结、炼铁、炼钢等生产过程产生的各种除尘灰进行理化特性的测定分析,研究了除尘灰直接回用烧结原料对烧结生产及机头电除尘器的影响,提出了除尘灰的科学分类和综合利用技术方案.     

倍福Profibus现场总线端子模块在炼钢电炉除尘系统中的应用

通过90 t炼钢电炉除尘工程控制系统的具体的工程项目实例,简略介绍了倍福(Beckhoff)现场总线端子模块及其在工程项目中的应用.     

焊接车间烟尘特性及治理措施

焊接生产会产生烟尘,焊接烟尘给人体带来的危害是比较严重的,焊接烟尘的治理方法有多种,合理选用可使焊接生产变成绿色环保型作业.     

不同喷雾方式下低阻文丘里振弦栅除尘配置优化实验研究

为了对比径向外喷和轴向喷雾下的低阻文丘里振弦栅耦合除尘效果,以除尘效率和系统阻力为参照,选定喉管气速、振弦栅数、纤维丝间隙和喉管液气比进行单因素实验。结果表明2种喷雾方式的除尘效率和系统阻力的变化趋势相同。利用SPSS软件进行4因素3水平正交实验设计,在特定参数条件下,2种喷雾方式的因素影响排序相同,除尘效率为纤维栅数＞纤维丝间隙＞喉管气速＞喷雾量;系统阻力为喉管气速＞纤维栅数＞纤维丝间隙＞喷雾量;径向外喷最佳配置为喉管气速24 m/s、喷雾量2.3 L/min、2块间隙为0.8 mm纤维栅板;轴向喷雾为喉管气速28 m/s、喷雾量2.4 L/min、2块间隙为0.8 mm纤维栅板;在最优配置下的除尘性能为径向外喷＞轴向喷雾。     

铝粉爆炸无火焰泄压技术及装备研究

为有效防止粉尘爆炸泄爆引起的二次爆炸及火灾问题,基于泄压理论、消火机理,设计开发无火焰泄压装置,装置主要由消火结构、底座、爆破片及夹持机构组成,消火结构由不锈钢金属丝网组成。选择铝粉尘为测试粉尘,通过自建除尘系统试验平台进行试验研究。结果表明:无火焰泄压装置可成功阻止火焰传播,装置释放的冲击波在5 m外均小于5 kPa,除尘系统内部最大泄爆压力为0.1 MPa,装置前端火焰传播速度均大于100 m/s。     

TSLCDM长袋低压脉冲布袋除尘器及其应用

为了使电炉烟气治理过程中污染源的排放达到国家排放标准,提出一种TSLCDM长袋低压脉冲除尘器(简称TSLCDM除尘器)。通过对该除尘器结构、除尘原理以及不同工况下除尘效率和过滤阻力的分析,得到该除尘器的除尘效率>99.9%,压力损失<1200 Pa,最终排出的烟气含尘质量浓度约5.54 mg/m3,满足了国家的超低排放要求,以泉州某公司电炉项目除尘系统为研究对象,证明了该新型脉冲布袋除尘器在电炉烟气治理除尘系统的应用效果,具有很好的经济和环境效益。     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

关于锅炉烟气脱硫除尘技术的探讨

目前国内能源结构仍以煤炭为主,大气污染非常的严重,尤其是酸雨和粉尘危害相对较大。在生态文明建设的时代背景下,我们应当加强锅炉脱硫以及除尘技术创新与改造,对燃煤烟尘以及二氧化硫等污染物的排放进行严格控制。本文先对锅炉烟气脱硫除尘现状进行了分析,并在此基础上就电厂锅炉如何进行烟气脱硫与除尘提出了一些观点与认识,以供参考。     

Spatial and Temporal Variations in Trace Metal Concentrations in the Cockle, Austrovenus Stutchburyi from Otago, New Zealand

This is the first comprehensive study of sources of variation in metal concentrations within the whole tissues of a shallow burrowing, filter-feeding intertidal clam, Austrovenus stutchburyi. Samples were collected from 12 sites in April, August, November and February in 1993–1994 in the vicinity of Otago Harbour and Peninsula, New Zealand. Total tissue trace metal concentrations (μg g⁻¹ dry weight) were measured in individual animals for the essential metals : Mn, Cu, Zn, Ni and the non-essential Cr using trace-metal clean acid-digestion and ICP-OAES techniques. Average metal concentrations were 3–60 μg g⁻¹ for Cu, 40–118 μg g⁻¹ for Zn, 2–12 μg g⁻¹ for Mn, 5–35 μg g⁻¹ for Ni and 1–44 μg g⁻¹ for Cr. These levels decreased with body weight and differed amongst sites except for Cr in February (mid-summer). Highest concentrations occurred at sites close to a city (Dunedin) and within the central harbour region although the Cu, Zn, Ni and Cr concentrations did not correlate with the environmental gradient or season. At one coastal site, samples of both the blue mussel Mytilus galloprovincialis and cockles gave similar trends in trace metal levels. These results suggest that the cockle could be a useful trace metal biomonitor within NZ estuaries.