我国烟草加工系统粉尘爆炸危险性分析

介绍了烟草粉尘爆炸特性，对我国烟草加工系统粉尘爆炸危险性作了分析。     

小型炭素焙烧炉沥青烟气净化技术初探

阐述了颗粒层吸附技术在小型炭素焙烧沥青烟气净化中的应用。     

安钢高炉出铁场除尘工程实践

六号高炉炉前出铁场工程是一项工业污染治理项目，该项目结合安钢实际，利用较少的投资，解决了多年困扰炼铁厂的炉前烟尘污染的问题，该技术结合目前国内中小高炉出铁场综合治理的经验，提出了顶吸加侧吸的综合捕集方式，极大地改善了出铁场的烟尘污染状况，同时回收的粉尘又有极高的利用价值，取得了一定的经济效益。     

Numerical Simulation of Synoptic Condition on a Severe Sand Dust Storm

By using observational data and MM5, an observational analysisand numerical study was conducted on the synoptic condition of a severe dust storm that was caused by a Mongolian cyclone whichoccurred from 6 to 8 April 2001. Results illustrated thatthe cyclogenesis was due to the isentropic potential vorticity (IPV) advection in the upper troposphere and the terrain modifiedbaroclinicity in the mid-lower troposphere. The Altai-Sayan complex of mountains blocked the lower level cold air and made the isentropic surface sharply steep. When the air slid down along the isentropic surface the increasing of baroclinicity anddecreasing of stability blew up the vertical vorticity development.The formation of the dust storm was a result of a cyclonic cold front passing across the area. The occurrence of this dust stormwas closely related to the strong surface wind, which was accompanied by a cold front passing, rather than the cyclogenesis, itself. Hence, the reason for the pre-front dust storm formulation was the formation of heating convection. Reasons behind the formation of a black storm (visibilitylower than 50 m), which occurred in the mid-north part ofInner Mongolia, lay in several aspects. Firstly, in thisarea the surface wind was strong, a direct result of thedownward transport in mid-lower troposphere. Secondly,the cold front passed over the effected area near sunsetso the air obtained much more surface heating to form adeeper mixed layer (ML). Thirdly, cooperation between thelower level wind and the terrain made the atmosphere inthis area and acquired the maximum advective contributionnecessary to form a deep post-front ML. The sensitivityexperiment revealed that surface heat flux was important to the frontal lifting. In addition, the forcing of surface heating wasalso seen as the primary forcing mechanism of frontogenesis. Meanwhile, removal of the surface heat flux made the atmosphericstratification became stable and the pre-storm ML very shallow,which weakened the strength of the dust storm.     

矿山呼吸性粉尘危害程度评价法研究

矿山呼吸性粉尘危害程度评价法研究侯祺棕（武汉工业大学资源与环境工程系）［摘要］通过对矿山呼吸性粉尘实际危害程度评价法的研究，并经实例检验，推荐两种具有可操作性和足够准确的评价法，这对矿山呼吸性粉尘监测新技术的推广具有重要意义。［关键词］呼吸性粉尘，危...     

布袋式除尘在大型煤炭筛分系统中的成功应用

煤炭筛分系统在工作时产生的大量煤尘对环境造成污染，为解决这一问题，我们设计安装了两套煤炭筛分除尘系统，通过布袋式除尘器，把煤尘用布袋收集起来，解决了煤炭粉尘污染问题，通过三年的使用观察，效果非常明显。     

半敞开烟气排放的测试方法的研究

综合分析了除尘系统进入的烟尘量、排放方式、排放浓度等5个参数及其相互关系,根据在一定时间内进入除尘系统烟气烟尘的量;对除尘器进口和出口即百叶窗内各方向烟尘浓度的测试,利用物料平衡方程,确定百叶窗内各测点各方向测定的烟气烟尘浓度,确定半敞开排放烟气烟尘的排放浓度,笔者发现,外排烟尘浓度与百叶窗内侧向烟尘浓度具有良好的线性关系,百叶窗内侧向测定烟尘浓度能够反映半敞开烟气排放浓度。据此,提出以半敞开方式排放烟气烟尘的除尘系统烟气烟尘浓度测试方法,即侧向间接测试法。     

抽出式通风煤巷掘进过程中粉尘浓度分布规律的数值模拟

根据气固两相流理论，针对矿井掘进工作面的特点，采用计算流体力学的离散相模型（DPM）对掘进工作面通风过程中粉尘浓度进行数值模拟，总结抽出式通风掘进巷道中粉尘浓度的沿程分布及变化规律。     

管帏冲击式除尘器的应用

介绍了管帏冲击式除尘器的结构及其捕尘机理。介绍了对该除尘器进行除尘和防淋雨性能测试的实验方法和装置。分析了实验数据，得出了相应的结论。     

"地球表层"再讨论

对"地球表层概念"的界定与发展和基于新概念的地球表层系统(结构)等进行了综合讨论和阐述;定义了地球表层概念的内涵,提出:地球表层是指地表和近地表各圈层相互作用和渗透的地球部分,是地球上部多态(固、液、气、生物和有机态)物质相互渗透、交融并不断进行物能交换、转化和作用而结合形成的具有内部协同性和一定系统结构的有机整体,是地球生物的生存环境和地表生态系统发生、发展和演化的基础;进一步确立了地球表层的空间位置和范围(外延),即包括地球表面上下的岩石圈、水圈、大气圈、生物圈和物理(能量)场及其相关作用在内的地球空间,其下界是软流圈(以软流圈为过渡层),上界为大气圈最外层,至少应包括磁层在内;岩石圈以下的地幔和地核与大气圈以外的宇宙空间均为地球表层的环境.