气相色谱法测定大气中乙酸乙酯和甲基丙烯酸甲酯

建立了用气相色谱法测定大气中乙酸乙酯和甲基丙烯酸甲酯的方法。大气中乙酸乙酯和甲基丙烯酸甲酯活性炭吸附,二硫化碳解吸,DB-200毛细管柱分离,直接进样分析,氢火焰离子化检测器检测,时间定性,峰面积定量。本方法前处理简便,分离度好,分析灵敏度高,满足环境分析要求。     

Residual dynamics of thiacloprid in medical herbs marjoram, thyme, and camomile and in soil

Thiacloprid is a new insecticide of the chloronicotinyl family. To assess its risk after application, residual characteristics of thiacloprid in marjoram, thyme, and camomile and in soil were studied under field conditions. The active ingredient was extracted from the plant material using a mixture of acetone-water. After filtration, the extract was concentrated to the aqueous phase, diluted with water, and portioned against ethyl acetate on a matrix solid phase dispersion column. Thiacloprid was extracted from soil using a mixture of methanol-water, filtered, and re.extracted （clean up） with dichloromethane. The residues were quantified using HPLC-MS-MS. The methods were validated by recovery experiments. Thiacloprid residues in marjoram, thyme, and camomile and in soil persisted beyond 10, 14, 14, and 21 d but no residues were detected after 14, 21, 21, and 28 d, respectively. The data obtained in this study indicated that the biexponential model is more suitable than the first-order function to describe the decline of thiacloprid in fresh marjoram, fresh thyme, and dried camomile flowers with half-life （t1/2） of 1.1, 0.7, and 1.2 d, respectively. However, both the first-order function and biexponential model were found to be applicable for dissipation of thiacloprid in soil with almost the same t1/2 values of 3.5 and 3.6 d. The results indicated that thiacloprid dissipates rapidly and does not accumulate in the tested herbs and in soil.     

TiO2/硅藻土光催化氧化降解甲基橙的研究

使用经过预处理的硅藻土做载体,采用溶胶-凝胶法制备硅藻土负载二氧化钛光催化剂,利用XRD和EDS对其进行表征.通过分析光催化反应的主要影响因素,研究了硅藻土负载二氧化钛光催化剂对甲基橙的催化降解效果.结果表明：负载3次,在550℃焙烧2h,制备出的负载型催化剂催化活性较高,催化剂上的TiO2为锐钛矿结构.当催化剂投加量为lg/L,溶液初始浓度为15 mg/L,pH为3,H2O2为2 mmol/L时,对甲基橙的降解效果达到最佳.     

BiOCl/ZnMgAl-HTLCs复合材料光催化去除水中的甲基橙

以Mg(NO3)2·6H2O、Al(NO3)3·9H2O、Zn(NO3)2·6H2O、Bi(NO3)3·5H2O为主要原料,采用水热合成法,制备了Bi OCl/Zn Mg Al-HTLCs光催化剂,对其进行XRD、EDS、SEM、FT-IR、UV-Vis、TGA表征,并通过降解甲基橙(MO)实验,探究催化剂水热合成的p H、溶剂、温度对其光催化性能的影响.结果表明:Zn Mg Al-HTLCs改善了Bi OCl的分散性,Bi OCl/Zn Mg Al-HTLCs能够有效地催化去除水中的甲基橙,在p H=7.5、溶剂为水、T=140℃条件下,可见光催化活性最佳,光照60 min后对10 mg·L-1的甲基橙溶液(MO)的降解率均达到85%以上.综合表明,Bi OCl/Zn Mg Al-HTLCs是一种具有潜在应用前景的光催化剂.     

地下水环境中甲基叔丁基醚运移过程的动力学模型

建立了地下水环境中甲基叔丁基醚(MTBE)运移过程的变系数动力学模型,并对模型进行了验证和参数灵敏度分析.模拟结果表明,地下水流速和阻滞系数对于MTBE的运移过程影响最为显著,而水动力弥散系数的影响较小,忽略其变化不会对预测地下水环境中污染物运移的环境动力学行为造成太大误差.由此得到的结论可定量研究MTBE在地下水环境中的对流.扩散特征,还可为MTBE污染地下水的预测预报、修复治理等研究提供科学依据.     

絮凝剂PAN-DCD与甲基橙相互作用中的热力学研究

用平衡渗析法研究了有机高分子絮凝剂ＰＡＮ－ＤＣＤ与甲基橙（ＭＯ）在２０,２５,３０,３５℃下相互作用的热力学,求得结合常数Ｋ和热力学参数△Ｇ,△Ｈ,△Ｓ,在对不同絮凝剂结构进行表征的基础上,探讨了不同ＰＡＮ,ＤＣＤ配比对合成的絮凝剂与ＭＯ相互作用的影响,结果表明：ＰＡＮ－ＤＣＤ与ＭＯ的相互作用中能量作用是主要的：随ＰＡＮ与ＤＣＤ的比值增大,合成的絮凝剂ＰＤ１,ＰＤ２,ＰＤ３在常温下与ＭＯ的结合程试     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

聚苯乙烯/CdS/TiO_2双壳层核壳纳米颗粒可见光催化降解甲基橙

采用溶胶-凝胶法,在聚苯乙烯(PS)/CdS核壳纳米颗粒表面包覆致密TiO_2层,制备出具有双壳层结构的PS/CdS/TiO_2纳米复合颗粒,考察了制备条件对材料结构的影响,并利用甲基橙溶液对其光催化性能进行了评价。SEM、TEM、XRD和FTIR分析结果表明,制得的微球单分散性良好,壳层包覆完整,厚度均匀。PS/CdS/TiO_2制备的适宜反应时间为12~18 h,适宜反应pH为7~9。PS/CdS/TiO_2较PS/CdS具有更为优异的可见光催化性能。     

废水中甲基橙的电化学降解

以FTO导电玻璃作为阳极、石墨电极作为阴极电解模拟甲基橙废水,优化了工艺条件,并对甲基橙的降解机理进行了初步探究。实验结果表明,在NaCl投加量5 g/L、电压8 V、废水pH 6、初始甲基橙质量浓度6.0 mg/L的优化条件下电解30 min,废水的脱色率达91.3%,COD降低了62%。机理研究结果表明,电解产生的羟基自由基与甲基橙发生氧化还原反应,破坏了甲基橙的显色基团,使其内部某些化学键发生断裂,从而达到脱色的目的。     

Production of soybean ethanol-based biodiesel using CaO heterogeneous catalysts promoted by Zn,K and Mg

This article focuses on the optimization of the production of fatty acid ethyl esters from soybean oil using CaO-based heterogeneous catalysts. Three different catalytic promoters were evaluated: Magnesium, zinc, and potassium. The reaction has evaluated the promoter content (promoter to calcium molar ratio), catalyst load, alcohol to oil molar ratio, and temperature. Response surface methodology (RSM) was used to evaluate the influence of each variable on the yield of biodiesel. The addition of K₂O or MgO in the catalyst has enhanced the yield in fatty acid ethyl esters, while the use of ZnO as a promoter was not successful.